MSR 145 Bedienungsanleitung
User manual
MSR 145
SetupReaderViewerOnline
PC software
Online
Viewer
Setup
operating instructions
SetupReaderViewerOnline
Instructions
Reader
Additional software for PCs
Utility programs
SetupReaderViewerOnline
Instructions
3
SetupReaderViewerOnline
Contents
Important notes regarding this user manual ..........................4
Safety instructions and warnings....................................5
Operating Instructions MSR 145 Modular Signal Recorder ...............6
Overview.........................................................7
Controls .........................................................7
Turning the unit on / saving measurement parameters .....................8
Maintenance......................................................9
Userchecks ...................................................9
Cleaning ......................................................9
Charging the battery .............................................9
Specifications ....................................................11
Operating, transport and storage conditions ............................13
Troubleshooting ..................................................13
Packing list ......................................................14
Warranty........................................................14
Disposal........................................................14
Declaration of conformity ...........................................14
MSR PC software ................................................15
Setup ..........................................................23
Basic settings .................................................24
Prediction..................................................25
Shock Assistant .............................................25
Reducing the volume of data ..................................26
Conditional recording of measurement parameters (limits) ............26
LED behaviour ..............................................27
Transferring basic settings to several MSR 145s....................27
User settings ..................................................28
Calibrating the analog inputs ...................................29
Calibrating the acceleration sensors .............................30
Calibrating the humidity and temperature sensors ..................31
Formatting the memory ..........................................32
Reader .........................................................33
Viewer..........................................................34
Online ..........................................................40
MSR Utility programs.............................................42
CSV ...........................................................43
Cutter..........................................................44
Calc ...........................................................45
Concat .........................................................48
Additional software for PCs .......................................51
FreeMat ........................................................52
Address ........................................................53
SetupReaderViewerOnline
Instructions
4
SetupReaderViewerOnline
Important notes regarding this user manual
In this manual notes of particular importance are presented as follows:
Conventions
Term / Symbol Description Example
MSR 145 In this manual the term "MSR 145"
is used to mean both "MSR 145S",
"MSR 145WS" and "MSR 145W"
Commands, programs,
menu items, functions,
field names
Commands, programs, menu
items, functions, field names are
shown in bold.
Record
-> X See page X -> 5
•
Reference to further information
•Further information
CAUTION
Indicates that equipment may suffer dam-
age or that data loss may occur should the
instructions not be followed correctly.
WARNING
Indicates that equipment may suffer dam-
age or that there is a risk of injury to the op-
erator or user should the instructions not be
followed correctly.
SetupReaderViewerOnline
Instructions
5
SetupReaderViewerOnline
Safety instructions and warnings
WARNING
• Read the operating instructions carefully before using the MSR145 or the
MSR software. This will protect you personally and avoid damage to the
unit.
• The MSR 145 is a unit for recording and displaying measurement param-
eters and may not be used for safety-related applications.
• Before using the MSR145 check the unit itself and all cables for visible signs
of damage and never operate a damaged MSR 145. A damaged MSR 145
can endanger operator safety! Should the MSR 145 not function perfectly or
appear to be damaged, send it to MSR Electronics GmbH for repair.
• Ensure that no fluids enter the MSR 145's casing. Fluids cause corrosion
damage and short-circuits inside the MSR 145.
• The MSR145 must never be opened or modified. The manufacturer cannot
be held liable for damage resulting from use other than that for which the
unit is intended, or from improper operation of the unit.
• Never use an MSR145 with a leaking battery. Should a battery leak be de-
tected ensure that the electrolyte does not come into contact with the skin,
the eyes or the mouth. Should this occur, thoroughly rinse the affected area
with water for at least 15 minutes. Consult a doctor. Do not breathe in any
vapours emitted. Immediately clean the electrolyte from the MSR 145 using
a soft cloth and dispose of the cloth subsequently.
CAUTION
• Ensure the proper disposal of an obsolete MSR 145 and USB connection
cable ->14.
Instructions
6
Instructions
Operating Instructions
MSR 145W
MSR 145S
MSR 145WS
Instructions
7
Instructions
7
Overview
The MSR 145 is a miniaturised universal datalogger for measuring and recording
different physical measurement parameters. It contains a temperature sensor,
a humidity sensor with integrated temperature, a pressure sensor and a 3-axis
accelerometer (X, Y and Z axes). The measurement parameters can be trans-
ferred to a PC either once data logging is completed or during the data logging
process.
The MSR PC program enables users to customise the way in which the MSR145
measures and records data according to their requirements. The integrated clock
(RTC) allows data from as many MSR145 units as required to be synchronised
and merged into a single data record.
Controls
USB connection cable CD with MSR
software
Indicator LED’s
Blue:
Record indicator ->27
Red:
Alarm indicator ->26
Yellow: Battery charge
indicator ->10
Aperture for pressure sensor
Push-button
Aperture for humidity sensor
USB PC-Interface
Aperture for humidity sensor
MSR 145S MSR 145WS
MSR 145W
MSR 145S
MSR 145WS
Instructions
8
Instructions
8
Turning the unit on / saving measurement parameters
The storage properties of the MSR 145 are determined using the Setup pro-
gram*.
Control of measurement parameter storage can be either time activated,
value activated or by pushing the push button.
*Setup is an MSR PC program (see Setup chapter ->23).
Instructions
9
Instructions
9
Maintenance
User checks
• Check the MSR145 before each use.
• Before using the MSR145 check for visible signs of damage.
• Check the functions of the MSR145.
• Never use an MSR145 that is damaged or not functioning perfectly. Never use
damaged accessories.
• Ensure that the battery is sufficiently charged for the required period of use.
Should the MSR 145 not function perfectly or should damage become apparent
send the unit to MSR Electronics GmbH for repair. Repairs may only be carried
out by MSR Electronics GmbH or an authorised dealer. Defective or damaged
components may only be replaced with manufacturer’s original parts.
Cleaning
• Clean the MSR145 when necessary.
• Always disconnect the MSR145 from the PC before cleaning.
• Use a cleaning agent suitable for plastic or a cloth dampened with water and
soap.
Charging the battery
Before first use: The battery is not fully charged on delivery and should
be charged for approx. 3 hours before using the
MSR 145 for the first time.
Charge the MSR 145: • Before each use
• At least every six months
Method:
• Connect the MSR145 and the PC using the USB connection cable.
Notes:
• Ensure that the PC remains switched on.
• The yellow LED illuminates during charging (continuously).
• Charging is completed after a maximum of 3 hours.
• Recorded data is non-volatile and remains in the unit’s memory even when
the battery is exhausted.
•
Never store the MSR145 with a discharged battery.
See ->13 (storage conditions).
CAUTION
• MSR 145S: Ensure that no fluids enter the
MSR145's casing. Fluids will cause corrosion
damage and short circuits.
• Never use corrosive or abrasive cleaning agents or polishes.
• Cleaning agents containing additives such as alcohol will cause the case
to become matt and/or brittle.
Instructions
10
Instructions
10
Meaning of the yellow lamp when a USB device is connected
Yellow LED Meaning
Lights continuously Charging in progress
Off Fully charged or no connection to
PC or PC turned off
Flashes Fully charged
The battery is recharged for a
short time, e.g. during an online
measurement or data recording
Inhaltsverzeichnis
