MTD 13 7 S Series Service-Handbuch

Service Advisory MTD-214

Riders

Affected Models: Lawn Tractors With a 42 inch Mowing Deck, Model Numbers Beginning with 13, a Number 7in the

5th Model Position, and the Letter Sin the 8th Position.

Example: 13XX7XXSXXX

Affected S/N Range:

Date:

Purpose: There have been sporadic reports of excessive vibration with the mowing deck engaged. Should you receive

customer complaints of this nature, proceed with the following instructions.

N/A

September 26, 2016

NOTE: These materials are prepared for use by trained technicians who are experienced in the service and repair of

equipment of the kind described in this publication, and are not intended for use by untrained or inexperienced individu-

als. Such individuals should seek the assistance of an authorized service technician or dealer.

NOTE: Always wear eye protection while servicing equipment. Wear hearing protection when appropriate. Always work in

a well ventilated area and follow all safety precautions when dealing with combustible materials.

NOTE: Left (LH) and Right (RH) sides are determined from the operator’s position and facing in the forward direction

1 of 3

Subject: Excessive Vibration with the Mowing Deck Engaged.

Corrective Action: Order from your source of supply, one of part number 783-09457, Deck Idler Bracket, and two of part

number 712-04065, Nylon Flange Lock Nut. Figure 1.

712-04065

3/8-16 Flange

Nylon Lock nut

783-09457

Deck Idler

Bracket

Figure 1

This Advisory is Fix-As-Fail

NOTE: Before proceding, verify that all other possible causes of excessive vibration such as blade balance, a worn

belt, loose, broken or missing spindle/bracket mounting hardware, failed welds of the deck hangers, damaged pul-

ley(s), etc. have been corrected.

Advisory MTD-214

2 of 3

Advisory MTD-214

4. Remove the idler pulley and the shoulder spacer. Figure

3. The bolt can be removed later, with the idler bracket.

Figure 3

5. Using a spring puller or other suitable tool, unhook the

brake spring from the anchor point on the mowing deck.

6. Remove the 3/8-16x1.75” hex screw that secures the

idler bracket to the cutting deck. NOTE: The nut can be

accessed from under the cutting deck. Also remove the

pulley spacer. Figure 4.

Figure 2

Pulley Spacer

Figure 4

7. Remove the idler bracket from the mowing deck brake

rod by rotating it 180 degrees on the brake rod, to

release it from the keyhole slot in the idler bracket.

Remove the pulley mounting bolt and brake spring from

the idler bracket.

8. Transfer the brake assembly to the new idler bracket

using the existing self-tapping bolts. Tighten the bolts

securely, being careful not to over tighten them. Figure

Figure 5

3/8-16 Hex Nut

Pulley Cap

Shoulder Spacer

9. Install the new idler bracket onto the mowing deck in re-

verse order of removal using the new locknuts. Tighten

all hardware securely.

10. Install the mowing deck back onto the rider per the

instructions found in the Operator’s Manual

11. Operate the rider in a safe area to verify the correct op-

eration of the mowing deck and that all safety features

are functioning correctly.

Installation Procedure:

1. Remove the mowing deck per the instructions found in

the Operator’s Manual.

2. Place the deck on a suitable deck cart or workbench

that allows access to work underneath of it.

3. Remove the 3/8-16 hex flange nylon locknut and pulley

cap from the idler pulley. Figure 2. NOTE:The bolt

head can be accessed from below the idler bracket.

Warranty: Normal warranty terms apply. Indicate Service Advisory MTD-214 and 783-08654B as the original failed part

on the claim. Repair time allowance is 0.7 hours.

Mandatory>>>>When completing the warranty claim, select the drop down text shown below for the following claim

ﬁelds:

Group Code: Implement, Housing, Lift Mech Fail Code: Vibrates

Work Performed: Blade Brake Assembly

SERVICE MANAGER PARTS MANAGER SALES MANAGER SERVICE TECH. SERVICE TECH.

Circulate and Initial

3 of 3

Advisory MTD-214

THIS AREA WAS INTENTIONALLY LEFT BLANK

Andere MTD Rasenmäher Handbücher

MTD

MTD 190-802-000 Bedienungsanleitung

MTD

MTD 128-252R000 Bedienungsanleitung

MTD

MTD 769-01645A Bedienungsanleitung

MTD

MTD 11A-084E705 Bedienungsanleitung

MTD

MTD Rover 13APA1KS333 Bedienungsanleitung

MTD

MTD 113-530 A Bedienungsanleitung

MTD

MTD 11A-504E000 Bedienungsanleitung

MTD

MTD 129-250-300 Bedienungsanleitung

MTD

MTD 13AM762F765 Bedienungsanleitung

MTD

MTD 121-337-300 Bedienungsanleitung

MTD

MTD 110-040 Bedienungsanleitung

MTD

MTD 132-415 Montage- und Bedienungsanleitung

MTD

MTD C06 Bedienungsanleitung

MTD

MTD 136-390A Handbuch

MTD

MTD 08M9 Bedienungsanleitung

MTD

MTD A00 Series Bedienungsanleitung

MTD

MTD 500 Series Bedienungsanleitung

MTD

MTD 122-440R000 Bedienungsanleitung

MTD

MTD 13BA26JC600 Bedienungsanleitung

MTD

MTD 125-260-000 Bedienungsanleitung

MTD

MTD 111-093R000 Bedienungsanleitung

MTD

MTD 407 Bedienungsanleitung

MTD

MTD 607 Bedienungsanleitung

MTD

MTD 120-848R000 Bedienungsanleitung

Beliebte Rasenmäher Handbücher anderer Marken

RHINO

RHINO 1958 Bedienungsanleitung

Wolf Garten

Wolf Garten Compact plus 40 B Bedienungsanleitung

Cub Cadet

Cub Cadet LTX 1045 Bedienungsanleitung

GGP ITALY SPA

GGP ITALY SPA CR/CS 434 SERIES Bedienungsanleitung

Challenge

Challenge CH18V2 Betriebsanleitung

TALEN TOOLS

TALEN TOOLS AVR HGM30 Bedienungsanleitung

DEWEZE

DEWEZE ATM-725 Bedienungsanleitung

Weed Eater

Weed Eater 180083 Bedienungsanleitung

Husqvarna

Husqvarna Poulan Pro PP185A42 Bedienungsanleitung

Better Outdoor Products

Better Outdoor Products Quick Series Bedienungsanleitung

Cub Cadet

Cub Cadet 23HP Z-Force 60 Betriebsanleitung

Toro

Toro Groundsmaster 3505-D Bedienungsanleitung

Dennis

Dennis FT 610 Bedienungsanleitung

Toro

Toro 74806 Bedienungsanleitung

Stihl

Stihl RMA 443 PV Bedienungsanleitung

Yard-Man

Yard-Man 3700-0 Bedienungsanleitung

AIRFORCE

AIRFORCE F-15 Gen 3 Bedienungsanleitung

Craftsman

Craftsman 917.377011 Bedienungsanleitung