MTD 19A70020OEM Service-Handbuch

ATTACHMENT / ZERO TURN SERIES

Service Advisory MTD-144

1 of 2

PURPOSE:

If installing a 19A70020OEM 42/46” RZT Bagger or 19A70004OEM 50” RZT Bagger onto a Model Year 2013 RZT-L, a

left hand and right hand counter weight bracket and mounting hardware will be required to install the counter weight.

ACTION REQUIRED: This advisory is for INFORMATIONAL PURPOSES ONLY

January 16, 2013

Counter Weight Mounting Brackets.

19A70020OEM 42/46” RZT Bagger.

19A70004OEM 50” RZT Bagger.

Models Affected:

Subject:

Date:

All Above Production Baggers, When Used On MY 2013 RZT-L.

Serial Number

Range Affected:

DISCUSSION:

1. Verify that the Bagger is one of the above listed Baggers Models Affected.

2. Confirm that the unit is a Model Year 2013 RZT- L.

3. Order the following from your parts source:

Item 1. Qty. (1) 703-09197-0637 LH Weight Mounting Bracket

Item 2. Qty. (1) 703-09193-0637 RH Weight Mounting Bracket

Item 3. Qty. (1) 689-00325 RZT Counter Weight Hardware Pack

4. See instructions for counter weight bracket installation on back of this Advisory.

NOTE: The 19B70020OEM and 19B70004OEM Baggers Will Have The LH and RH Weight Mounting Brackets

and RZT Counter Weight Hardware Pack Included.

NOTE: These materials are prepared for use by trained technicians who are experienced in the service and repair of

equipment of the kind described in this publication, and are not intended for use by untrained or inexperienced

individuals. Such individuals should seek the assistance of an authorized service technician or dealer.

NOTE: Always wear eye protection while servicing equipment. Wear hearing protection when appropriate. Always work

in a well ventilated area and follow all safety precautions when dealing with combustible materials.

NOTE: Left (LH) and Right (RH) sides are determined from the operator’s position and facing in the forward direction.

SERVICE MANAGER PARTS MANAGER SALES MANAGER SERVICE TECH. SERVICE TECH.

Circulate and Initial

Advisory MTD-144 2 of 2

Counter Weight

From 42/46” or 50”

Stationary Solid Front Axle

Shown For Reference Only

FIGURE 1

two (2) 3/8-16 Nylon Lock Flange Nuts from item # 3

(689-00325) Hardware Pack as shown in Figure 1. Do

Not tighten hardware at this time.

5. Install the weight brackets with counter weight to the

stationary solid front axle using the two (2) 5/16-18 x

3.25” Hex Head Cap Screws and two (2) 5/16-18 Nylon

Lock Flange Nuts from item # 3 (689-00325) Hardware

Pack.

6. Tighten all hardware securely from steps 4 and 5.

7. Finish following the instructions provided with the

42/46” or 50” RZT Bagger assembly.

Installation Instructions:

1. Follow the instructions provided with the 42/46” or 50”

RZT Bagger assembly.

2. Disregard the section of instructions for installing the

counter weight provided with the 42/46” or 50” RZT Bag-

ger assembly.

3. Follow steps 4 through 6 for installing the counter

weight provided in the 42/46” or 50” RZT Bagger assem-

bly while using the newly ordered LH and RH Weight

Mounting Brackets and Hardware Pack.

4. Install item #1 (703-09197-0637) Left Hand Weight

Mounting Bracket and item # 2 (703-09193-0637) Right

Hand Weight Mounting Bracket to the counter weight

from the 42/46” or 50” RZT Bagger assembly using the

two (2) 3/8-16 x 2.50” Hex Head Cap Screws and

5/16-18 x 3.25”

Hex Head

Cap Screw

5/16-18 x 3.25”

Hex Head

Cap Screw

5/16-18

Nylon Lock

Flange Nut

5/16-18

Nylon Lock

Flange Nut

3/8-16

Nylon Lock

Flange

3/8-16

Nylon Lock

Flange

3/8-16 x 2.50”

Hex Head

Cap Screw

3/8-16 x 2.50”

Hex Head

Cap Screw

Bagger Assembly

Andere Handbücher für 19A70020OEM

Dieses Handbuch passt für folgende Modelle

Andere MTD Rasenmäher Handbücher

MTD

MTD Series 770 Bedienungsanleitung

MTD

MTD 118-079B000 Bedienungsanleitung

MTD

MTD 807 Bedienungsanleitung

MTD

MTD 127-280-000 Bedienungsanleitung

MTD

MTD 142-822A Bedienungsanleitung

MTD

MTD 808H Series Bedienungsanleitung

MTD

MTD 11A-41MB006 Bedienungsanleitung

MTD

MTD 121-280R000 Bedienungsanleitung

MTD

MTD 82-0664 Bedienungsanleitung

MTD

MTD 123-290 Bedienungsanleitung

MTD

MTD 131-410A Bedienungsanleitung

MTD

MTD 132-410A Bedienungsanleitung

MTD

MTD 123-440A000 Bedienungsanleitung

MTD

MTD 111-093R000 Bedienungsanleitung

MTD

MTD 119-050R000 Bedienungsanleitung

MTD

MTD 136-360A Handbuch

MTD

MTD 500 through 509 Bedienungsanleitung

MTD

MTD 124-320-000 Bedienungsanleitung

MTD

MTD 12A-529R730 Bedienungsanleitung

MTD

MTD YARD-MAN 263 Bedienungsanleitung

MTD

MTD 214 KW Bedienungsanleitung

MTD

MTD 137-430-300 Bedienungsanleitung

MTD

MTD 130-660-000 Bedienungsanleitung

MTD

MTD 130-485A Bedienungsanleitung

Beliebte Rasenmäher Handbücher anderer Marken

RHINO

RHINO 1958 Bedienungsanleitung

Wolf Garten

Wolf Garten Compact plus 40 B Bedienungsanleitung

Cub Cadet

Cub Cadet LTX 1045 Bedienungsanleitung

GGP ITALY SPA

GGP ITALY SPA CR/CS 434 SERIES Bedienungsanleitung

Challenge

Challenge CH18V2 Betriebsanleitung

TALEN TOOLS

TALEN TOOLS AVR HGM30 Bedienungsanleitung

DEWEZE

DEWEZE ATM-725 Bedienungsanleitung

Weed Eater

Weed Eater 180083 Bedienungsanleitung

Husqvarna

Husqvarna Poulan Pro PP185A42 Bedienungsanleitung

Better Outdoor Products

Better Outdoor Products Quick Series Bedienungsanleitung

Cub Cadet

Cub Cadet 23HP Z-Force 60 Betriebsanleitung

Toro

Toro Groundsmaster 3505-D Bedienungsanleitung

Dennis

Dennis FT 610 Bedienungsanleitung

Toro

Toro 74806 Bedienungsanleitung

Stihl

Stihl RMA 443 PV Bedienungsanleitung

Yard-Man

Yard-Man 3700-0 Bedienungsanleitung

AIRFORCE

AIRFORCE F-15 Gen 3 Bedienungsanleitung

Craftsman

Craftsman 917.377011 Bedienungsanleitung