Multibrackets M Public Video Wall Mount Push HD Bedienungsanleitung

www.multibrackets.com

M Public Video Wall Mount Push HD

INSTALLATION AND USER MANUAL

Warning

For correct and safe use

This manual contains instructions and drawings for correct

and safe use of the product. Non-compliance with des-

criptions and drawings and/or improper use of the product

could cause the effects specied below. Please note the

following hazard symbols before reading the remainder of

this session, and follow the instructions thoroughly.

Danger: any failure in observing these instructions could

lead to death or serious injuries.

Warning: any failure in observing these instructions

could lead to failure or damage to objects.

Meaning of the symbol: the symbol warns against doing

something.

Special precautions for safety.

Danger

- Follow the instructions reported in this manual about the

installation method. Any failure in observing these instruc-

tions could lead to damage or injuries due to MONITOR

set or other objects falling down.

- Please use qualied personnel for installation

- Make sure that the wall where the MONITOR set has to

be installed can bear the weight of the MONITOR set

itself.

- Do not apply any other weight to the MONITOR set or the

bracket. This could make the MONITOR set fall down and

cause injuries or damage to objects.

- Do not change or alter the components for installation.

This make the MONITOR set fall down and cause injuries

or damage to objects.

Warning

Carry out the installation in places without humidity or dust.

- Do not install the MONITOR screen in places with a

high degree of humidity and dust. This could bring

about re or electric shocks.

- Do not install the MONITOR screen in places where it

could get in contact with fumes or vapours. This could

bring about re or electric shocks. ¨

Carry out the installation in a well vented area.

- Do not obstruct the holes for air passage on the MO-

NITOR screen. This could bring about re.

- Do not place the MONITOR set in a poorly vented

place.

Please take careful note of the following: use qualied

personnel for the installation. The producer will not bear

responsibility for any improper installation or any accident,

damage or injury that may come arise from incorrect instal-

lation.

Videowall with quick lock push system

www.multibrackets.com

Parts of the package

Dimensions

Wall ﬁxing point

Warning – danger x all cables to prevent possible damage.

Bracket (x1) Monitor sustain (x2)

Weight max load 50 kg

Screws M6x16 (x4) Screws M8x14 (x4)

www.multibrackets.com

Installation lcd bracket

Installation ﬁrst bracket

➀

➁

1.1 Mount on the back of monitor the lcd bracket (S).

1.2 Loose completly the two safety screws (D).

2.1 Determine the center (C) of the rst monitor on

bottom left.

2.2 Mark 252 mm up from (C) to the centering hole (A).

2.2 Fix the bracket horizontally by using the holes (F)

with a suitable anchor for your kind of wall.

Safety screw D

Centering hole

Perfect horizontal line

Level

Fixing holes

www.multibrackets.com

Mounting an aligning of the other bracket

➂

3.1 After you have mounted the rst bracket as des-

cribed, draw a horizontal line (the use of a laser

leveller may help).

3.2 Using the appropriate spacer, you can now place

the second bracket. Proceed in this way with the

other brackets.

3.3 Using the appropriate spacer, mount the rst

bracket of the next row. Draw a horizontal line

again. Proceed with the mounting of the next

brackets.

Allignement line

www.multibrackets.com

Kit mounting spacers

Example of horizontal monitor mounting with spacers

Example of vertical monitor mounting with spacers

➃

For quick installation of the videowall it’s advised to use

this spacer kit (not supplied). For each model of monitor

there is a speciﬁc spacer kit available.

Monitor width + 1 mm

Monitor height + 1 mm

Monitor height +

1 mm

www.multibrackets.com

Monitors allignement

➄

5.1 First hook bottom of the left monitor. Be careful to keep the knobs (X) between the brackets (S)

5.2 Check that the horizontal center of the monitor is alligned with the horizontal center of the

bracket.

5.3 Using a level allign the monitor parallel to the oor by using Z axel adjustment knob.

5.4 Using the Y axis regulation knob to ensure that every corner of the monitor is equidistant from

the wall.

5.5 Use a plumb for allign the rst column of monitors taking at least 1mm between them.

5.6 Hook remaning monitors taking at leas 1 mm between them.

5.7 When the position adjustement of the monitor is nished if necessary tight the safety screws

previously losened.

X axis adjustement knob Z axis adjustement knob

Y axis adjustement knobY axis adjustement knob

Level

Plumb

www.multibrackets.com

Mounting instructions Extender kit (600x400) / (800x400)

Landscape monitor Mount on the right side hole

Mount on the left side hole

Portrait monitor

screws

Screw

screws

TC+ M6x14

www.multibrackets.com

Mounting instructions Vesa 400x400 kit (included),

(max 580x440) horizontal monitor

Mount on the left side hole

Mount on the right side hole

screws

TC+ M6x14

Cross socket button head

screws M5x25

Nylon spacer Ø 20x11 mm

Mounting instructions Vesa 400x400 kit (included),

(max 580x440) vertical monitor

Andere Multibrackets Rack & Stand Handbücher

Multibrackets

Multibrackets M Projector Mount Pro HD Bedienungsanleitung

Multibrackets

Multibrackets M Motorized Turn Mount Bedienungsanleitung

Multibrackets

Multibrackets M Public Video Wall Mount Push SD 150Kg Max Bedienungsanleitung

Multibrackets

Multibrackets M QLED Wallmount 7 Series Bedienungsanleitung

Multibrackets

Multibrackets 6096 Bedienungsanleitung

Multibrackets

Multibrackets M Pull Down Full Motion Flexarm Bedienungsanleitung

Multibrackets

Multibrackets M VESA 7 350 073 734 269 Bedienungsanleitung

Multibrackets

Multibrackets 7350073736058 Bedienungsanleitung

Multibrackets

Multibrackets 7350073739585 Bedienungsanleitung

Multibrackets

Multibrackets Pro Series Bedienungsanleitung

Multibrackets

Multibrackets 7350073739585 Bedienungsanleitung

Multibrackets

Multibrackets 7350022734500 Bedienungsanleitung

Multibrackets

Multibrackets 7350073738748 Bedienungsanleitung

Multibrackets

Multibrackets M VESA Tablestand TurnLarge Bedienungsanleitung

Multibrackets

Multibrackets M Universal Projector Ceiling Mount 900-1600 with Fine... Bedienungsanleitung

Beliebte Rack & Stand Handbücher anderer Marken

Salamander

Salamander Acadia AC/W/L400/WH Bedienungsanleitung

Fohhn

Fohhn VAT-09 Benutzerhandbuch

ricoo

ricoo FS0522 Bedienungsanleitung

AMSOIL

AMSOIL BMK-22 Kurzanleitung

Kargo Master

Kargo Master 48220 Bedienungsanleitung

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung

ricoo

ricoo S1222 Bedienungsanleitung

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Bedienungsanleitung

VidaBox

VidaBox VB MNT FFS2 Bedienungsanleitung

Welch Allyn

Welch Allyn 48960 Bedienungsanleitung

Arkon

Arkon CM035-ST-2 Bedienungsanleitung

PROEL

PROEL PLWIN60C Bedienungsanleitung

Agilent Technologies

Agilent Technologies E2609B Bedienungsanleitung

Mustang

Mustang MV-ARM4 Bedienungsanleitung

Mounting Solutions

Mounting Solutions WRM-320 Bedienungsanleitung

Pyle

Pyle PMKSPAD1 Bedienungsanleitung

ShelterIt

ShelterIt 21208 Bedienungsanleitung

SPL

SPL RackPack?4 1040 Bedienungsanleitung