MULTIQUIP Essick Series Leitfaden

SERIES

OPERATION AND PARTS MANUAL

THIS MANUAL MUST ACCOMPANYTHE EQUIPMENT AT ALLTIMES.

MODEL

EM12M

EM12ME51

EM12ME53

Mechanical Drive

PLASTER/MORTAR MIXER

(HONDA GX390U1QA2 GASOLINE ENGINE)

Revision #2 (09/09/19)

Go to Discount-Equipment.com to order your parts

Discount-Equipment.com is your online resource for quality parts & equipment.

Florida: 561-964-4949 Outside Florida TOLL FREE: 877-690-3101

Need parts?

Click on this link: http://www.discount-equipment.com/category/5443-parts/ and

choose one of the options to help get the right parts and equipment you are looking

for. Please have the machine model and serial number available in order to help us

get you the correct parts. If you don’t find the part on the website or on one of the

online manuals, please fill out the request form and one of our experienced staff

members will get back to you with a quote for the right part that your machine needs.

We sell worldwide for the brands: Genie, Terex, JLG, MultiQuip, Mikasa, Essick, Whiteman,

Mayco, Toro Stone, Diamond Products, Generac Magnum, Airman, Haulotte, Barreto,

Power Blanket, Nifty Lift, Atlas Copco, Chicago Pneumatic, Allmand, Miller Curber, Skyjack,

Lull, Skytrak, Tsurumi, Husquvarna Target, Stow, Wacker, Sakai, Mi-T-M, Sullair, Basic,

Dynapac, MBW, Weber, Bartell, Bennar Newman, Haulotte, Ditch Runner, Menegotti,

Morrison, Contec, Buddy, Crown, Edco, Wyco, Bomag, Laymor, EZ Trench, Bil-Jax, F.S.

Curtis, Gehl Pavers, Heli, Honda, ICS/PowerGrit, IHI, Partner, Imer, Clipper, MMD, Koshin,

Rice, CH&E, General Equipment ,Amida, Coleman, NAC, Gradall, Square Shooter, Kent,

Stanley, Tamco, Toku, Hatz, Kohler, Robin, Wisconsin, Northrock, Oztec, Toker TK, Rol-Air,

APT, Wylie, Ingersoll Rand / Doosan, Innovatech, Con X, Ammann, Mecalac, Makinex, Smith

Surface Prep,Small Line, Wanco, Yanmar

PAGE 2 — EM12M SERIES PLASTER/MORTAR MIXER • OPERATION AND PARTS MANUAL — REV. #2 (09/09/19)

PROPOSITION 65 WARNING

Go to Discount-Equipment.com to order your parts

EM12M SERIES PLASTER/MORTAR MIXER • OPERATION AND PARTS MANUAL — REV. #2 (09/09/19) — PAGE 3

Grinding/cutting/drillingofmasonry,concrete,metaland

other materials with silica in their composition may give

off dust or mists containing crystalline silica. Silica is a

basic component of sand, quartz, brick clay, granite and

numerous other minerals and rocks. Repeated and/or

substantial inhalation of airborne crystalline silica can

cause serious or fatal respiratory diseases, including

silicosis.Inaddition, California and some other

authorities have listed respirable crystalline silica as a

substance known to cause cancer. When cutting such

materials, always follow the respiratory precautions

mentionedabove.

WARNING

Grinding/cutting/drillingofmasonry,concrete,metaland

other materials can generate dust, mists and fumes

containing chemicals known to cause serious or fatal

injury or illness, such as respiratory disease, cancer,

birth defects or other reproductive harm. If you are

unfamiliar with the risks associated with the particular

process and/or material being cut or the composition of

the tool being used, review the material safety data

sheet and/or consult your employer, the material

manufacturer/supplier, governmental agencies such as

OSHA and NIOSH and other sources on hazardous

materials. California and some other authorities, for

instance, have published lists of substances known to

cause cancer, reproductive toxicity,or other harmful

effects.

Control dust, mist and fumes at the source where

possible. In this regard use good work practices and

follow the recommendations of the manufacturers or

suppliers, OSHA/NIOSH, and occupational and trade

associations.Water should be used for dust

suppression when wet cutting is feasible. When the

hazardsfrominhalation of dust, mistsand fumescannot

be eliminated, the operator and any bystanders should

always wear a respirator approved by NIOSH/MSHAfor

thematerialsbeingused.

WARNING

SILICOSISWARNING RESPIRATORY HAZARDS

SILICOSIS/RESPIRATORY WARNINGS

Go to Discount-Equipment.com to order your parts

PAGE 4 — EM12M SERIES PLASTER/MORTAR MIXER • OPERATION AND PARTS MANUAL — REV. #2 (09/09/19)

TABLE OF CONTENTS

EM12M Series Mechanical

Plaster/Mortar Mixer

Proposition 65 Warning ........................................... 2

Silicosis/Respiratory Warnings ................................ 3

Table of Contents..................................................... 4

Training Checklist .................................................... 6

Safety Information ............................................. 7–12

Mixer Speciﬁcations/Noise and Vibration .............. 13

Engine/Electric Motor Speciﬁcations ..................... 14

General Information............................................... 15

Basic Components (Mixer) .................................... 16

Engine Components.............................................. 17

Electric Motor Components ................................... 18

Towing Guidelines ................................................. 19

Safety Chain Connection....................................... 20

Inspection ........................................................ 21–23

Start-Up ................................................................ 24

Start-Up/Operation ................................................ 25

Operation......................................................... 26–27

Maintenance (Engine) ........................................... 28

Maintenance (Engine) ..................................... 29–35

Troubleshooting (Mixer) ......................................... 36

Troubleshooting (Engine)................................. 37–38

Electric Motor Wiring 1Ø, 230 VAC, 60 Hz ............ 39

Electric Motor Wiring 3Ø, 230 VAC, 60 Hz ............ 40

Electric Motor Wiring 3Ø, 460 VAC, 60 Hz ............ 41

Explanation of Code in Remarks Column.............. 42

Suggested Spare Parts ......................................... 43

Component Drawings

Nameplate and Decals Assembly.................... 44–45

Paddle Blades Assembly................................. 46–47

Drum and Shaft Assembly............................... 48–49

Paddle Shaft Assembly.................................... 50–51

Frame Assembly.............................................. 52–53

Tow Bar Assembly ........................................... 54–55

Cabinet Assembly............................................ 56–57

Engine Assembly............................................. 58–59

1Ø 230 VAC, 60 Hz Electric Motor Assembly .. 60–61

3Ø 230/460, 60 Hz Electric Motor Assembly... 62–63

Clutch Assembly.............................................. 64–65

Transmission Assembly ................................... 66–69

Engine Service Parts....................................... 70–71

NOTICE

Speciﬁcations and part numbers are subject to change

without notice.

Go to Discount-Equipment.com to order your parts

EM12M SERIES PLASTER/MORTAR MIXER • OPERATION AND PARTS MANUAL — REV. #2 (09/09/19) — PAGE 5

NOTES

Go to Discount-Equipment.com to order your parts

PAGE 6 — EM12M SERIES PLASTER/MORTAR MIXER • OPERATION AND PARTS MANUAL — REV. #2 (09/09/19)

TRAINING CHECKLIST

Training Checklist

No, Description OK? Date

1Read operation manual

completely.

Machine layout, location of

components, checking of engine

oil levels.

3 Fuel system, refueling procedure.

4Operation of controls (machine

not running).

5Safety controls, safety stop switch

operation.

6 Emergency stop procedures.

7 Machine transport and storage.

Go to Discount-Equipment.com to order your parts

EM12M SERIES PLASTER/MORTAR MIXER • OPERATION AND PARTS MANUAL — REV. #2 (09/09/19) — PAGE 7

SAFETY INFORMATION

Do not operate or service the equipment before reading

the entire manual. Safety precautions should be followed

at all times when operating this equipment.

Failure to read and understand the safety

messages and operating instructions could

result in injury to yourself and others.

SAFETY MESSAGES

The four safety messages shown below will inform you

about potential hazards that could injure you or others.The

safety messages speciﬁcally address the level of exposure

to the operator and are preceded by one of four words:

DANGER, WARNING, CAUTION

or NOTICE.

SAFETY SYMBOLS

DANGER

Indicates a hazardous situation which, if not avoided,

WILL result in DEATH or SERIOUS INJURY.

WARNING

Indicates a hazardous situation which, if not avoided,

COULD result in DEATH or SERIOUS INJURY.

CAUTION

Indicates a hazardous situation which, if not avoided,

COULD result in MINOR or MODERATE INJURY.

NOTICE

Addresses practices not related to personal injury.

Potential hazards associated with the operation of this

equipment will be referenced with hazard symbols which

may appear throughout this manual in conjunction with

safety messages.

Lethal exhaust gas hazards

Explosive fuel hazards

Burn hazards

Rotating parts hazards

Symbol Safety Hazard

Hydraulic fluid hazards

Go to Discount-Equipment.com to order your parts

PAGE 8 — EM12M SERIES PLASTER/MORTAR MIXER • OPERATION AND PARTS MANUAL — REV. #2 (09/09/19)

SAFETY INFORMATION

GENERAL SAFETY

CAUTION



NEVER operate this equipment without proper protective

clothing, shatterproof glasses, respiratory protection,

hearing protection, steel-toed boots and other protective

devices required by the job or city and state regulations.



Avoid wearing jewelry or loose ﬁtting clothes that may

snag on the controls or moving parts as this can cause

serious injury.



NEVER operate this equipment when not

feeling well due to fatigue, illness or when

under medication.



NEVER operate this equipment under the

inﬂuence of drugs or alcohol.



ALWAYS clear the work area of any debris, tools, etc.

that would constitute a hazard while the equipment is

in operation.



ALWAYS check the equipment for loosened threads or

bolts before starting.



DO NOT use the equipment for any purpose other than

its intended purposes or applications.

NOTICE



This equipment should only be operated by trained and

qualiﬁed personnel 18 years of age and older.



Whenever necessary, replace nameplate, operation and

safety decals when they become difﬁcult read.



Manufacturer does not assume responsibility for any

accident due to equipment modiﬁcations. Unauthorized

equipment modiﬁcation will void all warranties.

NEVER

use accessories or attachments that are not

recommended by Multiquip for this equipment. Damage

to the equipment and/or injury to user may result.

ALWAYS know the location of the nearest

ﬁre extinguisher.

ALWAYS know the location of the nearest

ﬁrst aid kit.

ALWAYS know the location of the nearest phone or

keep

a phone on the job site.

Also, know the phone numbers

of the nearest ambulance, doctor and

ﬁre department.

This information will be invaluable in the case of an

emergency.

Go to Discount-Equipment.com to order your parts

EM12M SERIES PLASTER/MORTAR MIXER • OPERATION AND PARTS MANUAL — REV. #2 (09/09/19) — PAGE 9

SAFETY INFORMATION

MIXER SAFETY

DANGER



NEVER operate the equipment in an explosive

atmosphere or near combustible materials.An

explosion or ﬁre could result causing severe

bodily harm or even death.



DO NOT mix ﬂammable or explosive substances.

WARNING



NEVER place your hands inside the drum

while starting or operating this equipment.



NEVER disconnect any emergency

or safety devices. These devices are

intended for operator safety. Disconnection of these

devices can cause severe injury, bodily harm or even

death. Disconnection of any of these devices will void

all warranties.



Before operating mixer, ensure that safety grate is in

position and correctly ﬁtted.



NEVER use your hand to ﬁnd hydraulic

leaks. Use a piece of wood or cardboard.

Hydraulic ﬂuid injected into the skin must

be treated by a knowledgeable physician

immediately or severe injury or death can

occur.

CAUTION



NEVER lubricate components or attempt service on a

running machine.

NOTICE



ALWAYS keep the machine in proper running condition.



ALWAYS ensure mixer is on level ground before mixing.



Fix damage to machine and replace any broken parts

immediately.



DO NOT tip mixer onto drum mouth when the drum is

rotating.



Ensure the drum is rotating while ﬁlling and emptying

the drum.



ALWAYS store equipment properly when it is not being

used. Equipment should be stored in a clean, dry location

out of the reach of children and unauthorized personnel.

ENGINE SAFETY (GASOLINE MODELS ONLY)

DANGER



Engine fuel exhaust gases contain poisonous carbon

monoxide. This gas is colorless and odorless, and can

cause death if inhaled.



The engine of this equipment requires an adequate

free ﬂow of cooling air. NEVER

operate this equipment

in any enclosed or narrow

area where free ﬂow of the

air is restricted. If the air

ﬂow is restricted it will cause

injury to people and property

and serious damage to the

equipment or engine.

WARNING

DO NOT

place hands or fingers inside engine

compartment when engine is running.

NEVER

operate the engine with heat shields or

guards removed.

Keep ﬁngers, hands hair and clothing away

from all moving parts to prevent injury.

DO NOT remove the engine oil drain plug

while the engine is hot. Hot oil will gush out of the oil

tank and severely scald any persons in the general area

of the mixer.

CAUTION

NEVER touch the hot exhaust manifold,

mufﬂer or cylinder. Allow these parts to cool

before servicing equipment.



Make certain the operator knows how to and is capable

of turning the engine OFF in case of an emergency.

DANGEROUS

GAS FUMES

Go to Discount-Equipment.com to order your parts

Andere Handbücher für Essick Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere MULTIQUIP Mischer Handbücher

MULTIQUIP

MULTIQUIP MC-3SEA Bedienungsanleitung

MULTIQUIP

MULTIQUIP Whiteman WM-70S Bedienungsanleitung

MULTIQUIP

MULTIQUIP WM-90PE Bedienungsanleitung

MULTIQUIP

MULTIQUIP Whiteman WM70SH8C Leitfaden

MULTIQUIP

MULTIQUIP Essick EM-900S Bedienungsanleitung

MULTIQUIP

MULTIQUIP MIX N' GO Bedienungsanleitung

MULTIQUIP

MULTIQUIP Whiteman WM45E Leitfaden

MULTIQUIP

MULTIQUIP Essick Series Bedienungsanleitung

MULTIQUIP

MULTIQUIP ESSICK EM-700S Bedienungsanleitung

MULTIQUIP

MULTIQUIP Whiteman WM-90P Bedienungsanleitung

MULTIQUIP

MULTIQUIP MIX N' GO MC3SE Leitfaden

MULTIQUIP

MULTIQUIP EC-62S Leitfaden

MULTIQUIP

MULTIQUIP STOW PORTO MIX SMC3PE Bedienungsanleitung

MULTIQUIP

MULTIQUIP EM-90S Bedienungsanleitung

MULTIQUIP

MULTIQUIP EM70SH5 Bedienungsanleitung

MULTIQUIP

MULTIQUIP MC-42S Leitfaden

MULTIQUIP

MULTIQUIP EM120S series Leitfaden

MULTIQUIP

MULTIQUIP Whiteman WM120SH Series Bedienungsanleitung

MULTIQUIP

MULTIQUIP Whiteman MC94S Leitfaden

MULTIQUIP

MULTIQUIP EM-70S Bedienungsanleitung

MULTIQUIP

MULTIQUIP Whiteman Series Bedienungsanleitung

MULTIQUIP

MULTIQUIP MC3SE Bedienungsanleitung

MULTIQUIP

MULTIQUIP MIX N' GO Bedienungsanleitung

MULTIQUIP

MULTIQUIP Whiteman MC94S Leitfaden

Beliebte Mischer Handbücher anderer Marken

Bosch

Bosch GRW 9 Bedienungsanleitung

KitchenAid

KitchenAid KSM7581BZ0 Kurzanleitung

Jay-Lor

Jay-Lor 5050 Bedienungsanleitung

Sunbeam

Sunbeam FPSBSM210X Bedienungsanleitung

Thinky

Thinky ARE-250 Bedienungsanleitung

Midas

Midas XL4 Bedienungsanleitung

bianco

bianco PURO 4 Bedienungsanleitung

Paso

Paso DAG9200 Bedienungsanleitung

Sima

Sima SFX-9A Bedienungsanleitung

better chef

better chef IM-815WC Montageanleitung

ALLEN & HEATH

ALLEN & HEATH GR1 Bedienungsanleitung

Lacor

Lacor 69083 Technisches Datenblatt

M-Audio

M-Audio Midiman SAM Bedienungsanleitung

Buffalo

Buffalo CP921 Bedienungsanleitung

Pentair

Pentair HYPRO Cleanload 3376-0870 Betriebsanleitung

Cuisinart

Cuisinart SM50WHE Bedienungsanleitung

Hobart

Hobart HCM-300 Bedienungsanleitung

Kenwood

Kenwood Chef KM400 series Bedienungsanleitung