Multitech MultiModem ZBA MT9234ZBA Bedienungsanleitung
MultiModem®ZBA
MT9234ZBA-Series
MT9234ZBA
MT9234ZBA-V
Quick Start Guide
MultiModem ZBA Quick Start Guide
2 Multi-Tech Systems, Inc.
MultiModem ZBA Quick Start Guide
MT9234ZBA & MT9234ZBA-V
82100201L Rev. B
Copyright
This publication may not be reproduced, in whole or in part, without prior
expressed written permission from Multi-Tech Systems, Inc. All rights reserved.
Copyright © 2007 Multi-Tech Systems, Inc.
Multi-Tech Systems, Inc. makes no representations or warranty with respect to the
contents hereof and specifically disclaims any implied warranty of merchantability
or fitness for any particular purpose. Furthermore, Multi-Tech Systems, Inc.
reserves the right to revise this publication and to make changes from time to time
in the content hereof without obligation of Multi-Tech Systems, Inc. to notify any
person or organization of such revisions or changes. Check Multi-Tech’s Web site
for current versions of our product documentation.
Revision Date Description
A 03/27/07 Initial release.
B 10/08/07 Remove Phone Tools
Trademarks
Multi-Tech, MultiModem, and the Multi-Tech logo are registered trademarks of
Multi-Tech Systems, Inc. Microsoft, Windows 2000, 2003, and XP are registered
trademarks or trademarks of Microsoft Corporation in the United States and/or
other countries.
Technical Support
Country By Email By Phone
Europe, Middle East, Africa: support@multitech.co.uk +(44) 118 959 7774
U.S., Canada. all others: support@multitech.com (800) 972-2439 or
+763-717-5863
World Headquarters
Multi-Tech Systems, Inc.
2205 Woodale Drive
Mounds View, Minnesota 55112 U.S.A.
(763) 785-3500 or (800) 328-9717
Fax (763) 785-9874
http://www.multitech.com
MultiModem ZBA Quick Start Guide
Multi-Tech Systems, Inc. 3
Introduction
This guide shows you how to set up your MultiModem ZBA. For detailed
information, product specifications, troubleshooting tips, and more, see
the User Guide, available on your MultiModem Product CD.
Check Multi-Tech’s Web site for current versions of our product
documentation.
Safety Warnings
•Use this product only with UL- and CUL-listed computers.
•To reduce the risk of fire, use only UL-listed 26 AWG (.41mm) or
larger telephone wiring.
•Never install telephone wiring during a lightning storm.
•Never install a telephone jack in a wet location unless the jack is
specifically designed for wet locations.
•Never touch uninsulated telephone wires or terminals unless the
telephone line has been disconnected at the network interface.
•Use caution when installing or modifying telephone lines.
•Avoid using a telephone during an electrical storm; there is a risk of
electrical shock from lightning.
•Do not use a telephone in the vicinity of a gas leak.
•The telephone cord is to be disconnected before accessing the
inside of the equipment.
Package Contents
•One MultiModem ZBA
•One set of four self-adhesive plastic feet
•One 50/60Hz universal power supply
•One 9-pin to 25-pin serial cable
•One RJ11 telephone cable
•One printed Quick Start Guide
•One product CD
MultiModem ZBA Quick Start Guide
4 Multi-Tech Systems, Inc.
Modem Installation
Connect the Modem to Your System
Turn off your computer. Place the modem in a convenient location, and
then connect it to your computer’s serial port, the phone line, AC power,
and your phone.
Connections – No Voice
Connections with voice
Connect the Modem to Your PC
Plug one end of the RS-232 serial cable into the RS-232 connector on
the modem, and plug the other end into a serial port connector on your
computer, such as COM1 or COM2.
Connect the Modem to the Telephone Line
Plug one end of the provided telephone cable into the modem’s LINE
jack, and the other end into a telephone wall jack. This is the only
required connection.
Important: The LINE jack is not interchangeable with the PHONE
jack. Do not plug the phone into the LINE jack or the line cable into
the PHONE jack.
Note: The Federal Communications Commission (FCC) and
Industry Canada impose certain restrictions on equipment
connected to public telephone systems.
Connect the Two-Wire Lease Line (Leased-Line Only)
For leased line information, see the User Guide, available on your
MultiModem Product CD.
MultiModem ZBA Quick Start Guide
Multi-Tech Systems, Inc. 5
Connect the Modem to the Phone (Optional)
If you want to connect a phone to the same line as the modem, plug
the phone cable into the modem PHONE jack.
Connect the Microphone (Voice Option Only)
To connect a microphone, see the User Guide, available on your
MultiModem Product CD.
Connect the Speaker(s) (Voice Option Only)
For speakerphone or voice mail applications, use a 1/8-inch plug male-
to-male stereo patch cord to connect the SPKR jack on the side of the
modem to the LINE IN jack on your sound card. If your sound card does
not have a LINE IN jack, use its MIC jack. The stereo male-to-male
patch cord can be purchased at a local PC retail store. If you do not
have a sound card, you can plug an amplified speaker directly into the
SPKR jack.
Connect the Modem to the AC Power Outlet
The power switch is located on the right side of the modem. Make sure it
is set to OFF.
Attach the appropriate interchangeable blade module to the power
supply module. Connect the power lead from the power supply module
into the PWR jack on the modem. Now, plug the power supply module
into your power source.
Note: Use only the power supply supplied with the modem. Use of any
other power supply voids the warranty and can damage the modem.
Power-on Test
When you apply power, the modem performs a diagnostic self-test. The
56 indicator should light. If this does not happen, check that the power
switch is on, the power supply is solidly connected, and the AC outlet is
live.
Installing the Modem Driver
If you use Windows 2000 or newer, you must install the modem driver.
The modem driver tells Windows how to control the modem. If you use a
Linux operating system, please see the User Guide for installation
instructions.
MultiModem ZBA Quick Start Guide
6 Multi-Tech Systems, Inc.
1. Make sure your modem is connected properly, and then turn on
your computer. Windows should detect your new modem and
open the Install New Modem wizard.
Note: If Windows cannot find a modem, it may be plugged into the
wrong connector on your computer. See Solving Problems in the
User Guide.
2. Insert the product CD into your CD-ROM drive, and then click OK.
3. Windows installs the modem driver.
4. Click Finish to exit.
Configure the Modem for Your Country
Different countries have different requirements for how modems must
function. Therefore, before you use your modem, you must configure it
to match the defaults of the country in which you are using it. You can
use one of two configuration methods:
•Using the Global Wizard to Configure Your Modem
•Using AT Commands to Configure Your Modem
Using Global Wizard to Configure Your Modem
The Global Wizard configuration utility is recommended for computers
running Windows Vista/XP/2003/2000.
1. Insert the MultiModem ZBA system CD into the CD-ROM drive.
The Autorun dialog box appears.
2. Click Initial Setup and Country Selection.
3. Choose either:
•Run Global Wizard from CD. This will not load the wizard
onto your hard drive, or
•Install Global Wizard on the HD. This will install the wizard
onto your hard drive for future use.
4. The Global Wizard dialog box appears. Click Next.
5. The Wizard searches for your modem and identifies it. Click Next.
6. Select the country in which the modem will be used. Click Next.
7. Review your choice of country. If it is correct, click Next to
configure the modem.
8. When Global Wizard announces that the parameters have been
set, click Finish to exit.
MultiModem ZBA Quick Start Guide
Multi-Tech Systems, Inc. 7
Using AT Commands to Configure Your Modem
Non-Windows users can configure the modem using AT commands.
You must enter these commands in your communication programís
terminal window.
1. Run your favorite communication program and open the programs
terminal window.
2. To configure the modem for a specific country:
Type AT%T19,0,nn (where nn is the country code in
hexadecimalformat
Press ENTER.
The message OK displays.
3. To verify the change:
Type ATI9.
Press ENTER.
The country code is displayed in decimal format, as in this
example:
Country AT command
(hexadecimal) Result code
(decimal)
Euro/NAM AT%T19,0,34 (default) 52
The complete list of country codes can be found on the Multi-Tech
Web site at http://www.multitech.com/GlobalModem/config.
82100201L
Patents
This device is covered by one or more of the following patents:
6,031,867; 6,012,113; 6,009,082; 5,905,794; 5,864,560; 5,815,567;
5,815,503; 5,812,534; 5,809,068; 5,790,532; 5,764,628; 5,764,627;
5,754,589; D394,250; 5,724,356; 5,673,268; 5,673,257; 5,644,594;
5,628,030; 5,619,508; 5,617,423; 5,600,649; 5,592,586; 5,577,041;
5,574,725; D374,222; 5,559,793; 5,546,448; 5,546,395; 5,535,204;
5,500,859; 5,471,470; 5,463,616; 5,453,986; 5,452,289; 5,450,425;
D361,764; D355,658; D355,653; D353,598; D353,144; 5,355,365;
5,309,562; 5,301,274;7082106;7082141;7092406 . Other patents
pending.
Andere Handbücher für MultiModem ZBA MT9234ZBA
4
Dieses Handbuch passt für folgende Modelle
3
Inhaltsverzeichnis
Andere Multitech Modem Handbücher
Multitech
Multitech MultiConnect MicroCell MTCM-LAT3 Bedienungsanleitung
Multitech
Multitech MultiModem MT2834ZDX Series Bedienungsanleitung
Multitech
Multitech MultiModem MT2834MR6 Technisches Handbuch
Multitech
Multitech MultiConnect microCell MTCM2-L6G1 Bedienungsanleitung
Multitech
Multitech MultiModem ZPX Bedienungsanleitung
Multitech
Multitech MTC-EV3 Bedienungsanleitung
Multitech
Multitech MultiModem MT5656ZDX-Series Bedienungsanleitung
Multitech
Multitech MultiModem II BA-Series Bedienungsanleitung
Multitech
Multitech IWAY MT128ISA-UV Bedienungsanleitung
Multitech
Multitech MultiModem MT5600ZDX Bedienungsanleitung
Multitech
Multitech MTSMC-H5 Anwendungshandbuch
Multitech
Multitech MultiConnect rCell 100 Series Bedienungsanleitung
Multitech
Multitech MultiConnect MicroCell MTCM-LAT3 Bedienungsanleitung
Multitech
Multitech MultiConnect Adapter Bedienungsanleitung
Multitech
Multitech MT1932ZDXI Betriebsanleitung
Multitech
Multitech MTCBA-C-U Bedienungsanleitung
Multitech
Multitech MT5656ZDX Series Bedienungsanleitung
Multitech
Multitech 5634 Series Bedienungsanleitung
Multitech
Multitech MultiModem MT5600DSDV2 Bedienungsanleitung
Multitech
Multitech Multimodem MTCBA-G-F1 Bedienungsanleitung
Beliebte Modem Handbücher anderer Marken
Davicom
Davicom DM562AP Bedienungsanleitung
EpiValley
EpiValley TATA indicom SXC-1080 Bedienungsanleitung
Zte
Zte WiMAX Bedienungsanleitung
Intelimax
Intelimax MA-2060 Bedienungsanleitung
SMC Networks
SMC Networks D3CM1604V Gebrauchs- und Pflegehandbuch
Telstra
Telstra Wi-Fi 4G Advanced Pro X Bedienungsanleitung
US Robotics
US Robotics 3453C Bedienungsanleitung
MaxTech
MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Bedienungsanleitung
Zte
Zte MF823 Bedienungsanleitung
Four-Faith
Four-Faith F1403 Bedienungsanleitung
Sierra Wireless
Sierra Wireless AIRLINK MP595W Bedienungsanleitung
Gemtek
Gemtek WiMAX WIXFBR-103 Bedienungsanleitung