Murata LLM215C70G105MA11 Series Bedienungsanleitung

LLM215C70G105MA11_ (0805, X7S:EIA, 1uF, DC4V)

_: packaging code Reference Sheet

1.Scope

2.MURATA Part NO. System

(Ex.)

3. Type & Dimensions

a)Equivalent Circuit

(Unit:mm)

4.Rated value

5.Package

Product specifications in this catalog are as of Jun.8,2017,and are subject to change or obsolescence without notice.

Please consult the approval sheet before ordering.

Please read rating and !Cautions first.

Only Reflow Soldering

(1)-1 L

2.0±0.1

(1)-2 W

1.25±0.1

10 Terminals Low ESL Chip Multilayer Ceramic Capacitors for General Purpose

mark

(4)

Rated

Voltage

Packaging Unit

DC 4 V

Temp. Range

(Ref.Temp.)

(8) Packaging

Temp. coeff

or　Cap. Change

This product specification is applied to 10 Terminals Low ESL Chip Multilayer Ceramic Capacitors used for General Electronic equipment.

This product is applied for Only Reflow Soldering.

(2) T

0.5+0.05/-0.1

-55 to 125 °C

-22 to 22 %

-55 to 125 °C

(25 °C)

(6)

Capacitance

Tolerance

1 uF

Specifications and Test

Methods

(Operating

Temp. Range)

±20 %

(3) Temperature Characteristics

(Public STD Code):X7S(EIA)

0.5±0.05

(5) Nominal

Capacitance

f180mm Reel

EMBOSSED W8P4

4000 pcs./Reel

f330mm Reel

EMBOSSED W8P4

10000 pcs./Reel

(1)L/W

Dimensions (2)T

Dimensions (3)Temperature

Characteristics (4)Rated

Voltage (5)Nominal

Capacitance (6)Capacitance

Tolerance (8)Packaging Code



Code

LLM 21 5C7 0G 105 M A11 L

LLM215C70G105MA11-01 1

1 Rated Voltage Shown in Rated value. The rated voltage is defined as the maximum voltage

which may be applied continuously to the capacitor.

When AC voltage is superimposed on DC voltage,

VP-P or VO-P, whichever is larger, should be maintained

within the rated voltage range.

2 Appearance No defects or abnormalities. Visual inspection.

3 Dimension Within the specified dimensions. Using Measuring instrument of dimension.

4 Voltage proof No defects or abnormalities. Measurement Point : Between the terminations

Test Voltage : 250% of the rated voltage

Applied Time : 1s to 5 s

Charge/discharge current : 50mA max.

5 Insulation Resistance(I.R.)

C≦ Measurement Point 　　 : Between the terminations

C＞ Measurement Voltage : DC Rated Voltage

C:Nominal Capacitance Charging Time : 2 min

Charge/discharge current : 50mA max.

Measurement Temperature : Room Temperature

6 Capacitance Shown in Rated value. Measurement Temperature : Room Temperature

7 Dissipation Factor (D.F.)

W.V.:25Vdc min. 　: 0.025max. * For item LLA185 C7 0G 274 to 474, the capacitance should be

W.V.:16/10Vdc 　　: 0.035max. measured using a voltage of 0.5+/-0.1Vrms.

W.V.:6.3Vdc max. : 0.05max. 　For item LLA185/215 C7 0G 473, the capacitance should be

measured using a voltage of 0.5+/-0.2Vrms.

Temperature No bias R7 : Within +/-15% (-55°C to +125°C) The capacitance change should be measured after 5 min

Characteristics R6 : Within +/-15% (-55°C to +85°C) at each specified temp. stage.

of Capacitance C7 : Within +/-22% (-55°C to +125°C) Capacitance value as a reference is the value in step 3.

· Initial measurement

Perform a heat treatment at 150+0/-10°C for 1h and then

let sit for 24+/-2h at room temperature,then measure.

9 Adhesive Strength of No removal of the terminations or other defect Solder the capacitor on the test substrate (glass epoxy board).

Termination should occur.

Applied Force　　　　　　 : 5N

Holding Time : 10+/-1s

Applied Direction : In parallel with the test substrate and vertical with

the capacitor side.

10 Vibration  Appearance No defects or abnormalities. Solder the capacitor on the test substrate (glass epoxy board).

Capacitance Within the specified initial value. Kind of Vibration : A simple harmonic motion

10Hz to 55Hz to 10Hz (1min)

D.F. Within the specified initial value. Total amplitude : 1.5mm

This motion should be applied for a period of 2h in each 3 mutually

perpendicular directions(total of 6h).

■Specifications and Test Methods

Item

Specification

Test Method

(Ref. Standard:JIS C 5101, IEC60384）

Step

Temperature(C)

Applying Voltage(Vdc)

Reference Temp.+/-2

No bias

Min.Operating Temp.+/-3

Reference Temp.+/-2

Max.Operating Temp.+/-3

Reference Temp.+/-2

Capacitance

Frequency

Voltage

C≦

1.0+/-0.1kHz

1.0+/-0.2Vrms *

JEMCAS-00670C 2

11 Solderability 75% of the terminations is to be soldered evenly and continuously. Test Method : Solder bath method

Flux : Solution of rosin ethanol 25(mass)%

Preheat :

80℃to 120℃for 10s to 30s

Solder : Sn-3.0Ag-0.5Cu

Solder Temp. :

245+/-5℃

Immersion time :

2+/-0.5s

Temperature Appearance No defects or abnormalities. Solder the capacitor on the test substrate (glass epoxy board).

Sudden Change

Capacitance Within +/-7.5% Perform the 5 cycles according to the four heat treatments

Change shown in the following table.

D.F. Within the specified initial value.

I.R. Within the specified initial value.

Voltage proof No defects.

Exposure Time : 24+/-2h

· Initial measurement

Perform a heat treatment at 150+0/-10°C for 1h and then

let sit for 24+/-2h at room temperature,then measure.

High Appearance No defects or abnormalities. Solder the capacitor on the test substrate (glass epoxy board).

Temperature

High Humidity Capacitance Within +/-12.5%

Test Temperature :

40+/-2℃

(Steady) Change

Test Humidity :

90%RH to 95%RH

Test Time :

500+/-12h

D.F.

W.V.:10Vdc min. 　: 0.05max. Applied Voltage : DC Rated Voltage

W.V.:6.3Vdc max. : 0.075max. Charge/discharge current : 50mA max.

Exposure Time :

24+/-2h

I.R. 

14 Durability Appearance No defects or abnormalities. Solder the capacitor on the test substrate (glass epoxy board).

Capacitance Within +/-12.5% Test Temperature : Max. Operating Temp. +/-3℃

Change

Test Time :

1000+/-12h

Applied Voltage : 200% of the rated voltage

D.F.

W.V.:10Vdc min. 　: 0.05max. Charge/discharge current : 50mA max.

W.V.:6.3Vdc max. : 0.075max. Exposure Time : 24+/-2h

I.R. 

･Initial measurement

Apply 200% of the rated DC voltage at the max. operating

temp. +/-3°C for 1h.

Remove and set for 24+/-2h at room temperature.

Perform initial measurement.

Item

Specification

Test Method

(Ref. Standard:JIS C 5101, IEC60384）

Step

Temp.(C)

Time (min)

Min.Operating Temp.+0/-3

30+/-3

Room Temp.

2 to 3

Max.Operating Temp.+3/-0

30+/-3

Room Temp

2 to 3

JEMCAS-00670C 3

1.Tape Carrier Packaging(Packaging Code:L/K)

1.1 Minimum Quantity(pcs./reel)

1.2 Dimensions of Tape (in mm)

Package

LLM Type

Type

f180mm reel

f330mm reel

Plastic Tape

Code : L

Code : K

LLM21

4000

10000

0.2±0.1

2.5max

4.0±0.1

＋０．１

－０

4.0±0.1

2.0±0.1

1.75±0.1

3.5±0.05

8.0±0.3

Type

Dimensions(Chip)

LLM21

2.0±0.1

1.25±0.1

0.5 +0.05/-0.1

1.45±0.20

2.25±0.20

JEMCAP-01913A 4

Package

LLM Type

Chip

2.0±0.5



180+0/-3.0

330±2.0

f50 min



10±1.5

16.5 max

Hole for Chip : As specified in 1.2

Base Tape : As specified in 1.2

Top Tape : Thickness 0.05

Feeding Hole : As specified in 1.2

Fig 1 Package Chip

Fig2 Dimension of Reel

Fig3 Taping Diagram

(in mm)

JEMCAP-01913A 5

1.3 Tapes for capacitors are wound clockwise shown in Fig.3.

(The sprocket holes are to the right as the tape is pulled toward the user.)

1.4 Part of the leader and part of the vacant section are attached as follows. (in mm)

1.5 Accumulate tolerance of sprocket holes pitch = ±0.3mm / 10 pitch

1.6 Chip in the tape is enclosed by top tape and bottom tape as shown in Fig.1.

1.7 The top tape and base tape are not attached at the end of the tape for a minimum of 5 pitches.

1.8 There are no jointing for top tape and bottom tape.

1.9 There are no fuzz in the cavity.

1.10 Break down force of top tape : 5N min.

1.11 Reel is made by resin and appeaser and dimension is shown in Fig 2.

There are possibly to change the material and dimension due to some impairment.

1.12 Peeling off force : 0.1N to 0.6N in the direction as shown below.

1.13 Label that show the customer parts number, our parts number, our company name, inspection

number and quantity, will be put in outside of reel.

Package

LLM Type

図

ﾁｯﾌﾟ詰め状態

(

単位：

mm)

Tail vacant Section

Chip-mounting Unit

Leader vacant Section

Leader Unit

(Top Tape only)

Direction

of Feed

160 min.

190 min.

210 min.

165 to 180°

Top Tape

JEMCAP-01913A 6

Caution

■Limitation of Applications

Please contact us before using our products for the applications listed below which require especially high reliability

　for the prevention of defects which might directly cause damage to the third party's life, body or property.

　　　①Aircraft equipment ②Aerospace equipment ③Undersea equipment ④Power plant control equipment

　　　⑤Medical equipment ⑥Transportation equipment(vehicles,trains,ships,etc.) ⑦Traffic signal equipment

　　　⑧Disaster prevention / crime prevention equipment ⑨Data-processing equipment

　　　⑩Application of similar complexity and/or reliability requirements to the applications listed in the above.

■Storage and Operation condition

1. The performance of chip multilayer ceramic capacitors may be affected by the storage conditions.

1-1. Store the capacitors in the following conditions:

Room Temperature of +5℃to +40℃and a Relative Humidity of 20% to 70%.

(1) High temperature and humidity conditions may accelerate the deterioration of solderability due to oxidation

of the terminal electrodes and deterioration of taping/packaging performance.

Therefore, maintain the appropriate storage temperature and humidity.

(2) Prolonged storage may cause oxidation of the electrodes and deterioration of the packaging materials.

If more than six months have elapsed since delivery, check the mounting before use.

If more than one year has elapsed since delivery, also check the solderability before use.

Even if the storage period is short, do not exceed the specified atmospheric conditions.

(3) Store the capacitors in the original packaging without opening the smallest packing unit.

Do not exceed the above atmospheric conditions for any length of time.

1-2. Corrosive gas can react with the termination (external) electrodes or lead wires of capacitors, and result

in poor solderability. Do not store the capacitors in an atmosphere consisting of corrosive gas (e.g.,hydrogen

sulfide, sulfur dioxide, chlorine, ammonia gas etc.).

1-3. Due to moisture condensation caused by rapid humidity changes, or the photochemical change caused

by direct sunlight on the terminal electrodes and/or the resin/epoxy coatings, the solderability and

electrical performance may deteriorate. Do not store capacitors under direct sunlight or in high huimidity

conditions

■Rating

1.Temperature Dependent Characteristics

1. The electrical characteristics of the capacitor can change with temperature.

1-1. For capacitors having larger temperature dependency, the capacitance may change with temperature

changes. The following actions are recommended in order to ensure suitable capacitance values.

(1) Select a suitable capacitance for the operating temperature range.

(2) The capacitance may change within the rated temperature.

When you use a high dielectric constant type capacitor in a circuit that needs a tight (narrow) capacitance

tolerance (e.g., a time-constant circuit), please carefully consider the temperature characteristics, and

carefully confirm the various characteristics in actual use conditions and the actual system.

[Example of Temperature Caracteristics X7R(R7)] [Example of Temperature Characteristics X5R(R6)]



-20

-10

-15

-5

Temperature (C)

-75 -50 -25 025 50 75 100 125 150

Capacitance Change(%)

-20

-10

-15

-5

Temperature (C)

-75 -50 -25 025 50 75 100

Capacitance Change(%)

JEMCAC-00641D 7

2.Measurement of Capacitance

1. Measure capacitance with the voltage and frequency specified in the product specifications.

1-1. The output voltage of the measuring equipment may decrease occasionally when capacitance is high.

Please confirm whether a prescribed measured voltage is impressed to the capacitor.

1-2. The capacitance values of high dielectric constant type capacitors change depending on the AC voltage applied.

Please consider the AC voltage characteristics when selecting a capacitor to be used in a AC circuit.

3.Applied Voltage

1. Do not apply a voltage to the capacitor that exceeds the rated voltage as called out in the specifications.

1-1. Applied voltage between the terminals of a capacitor shall be less than or equal to the rated voltage.

(1) When AC voltage is superimposed on DC voltage, the zero-to-peak voltage shall not exceed the rated DC voltage.

When AC voltage or pulse voltage is applied, the peak-to-peak voltage shall not exceed the rated DC voltage.

(2) Abnormal voltages (surge voltage, static electricity, pulse voltage, etc.) shall not exceed the rated DC voltage.

Typical Voltage Applied to the DC capacitor

DC Voltage DC Voltage+AC AC Voltage Pulse Voltage

(E：Maximum possible applied voltage.)

1-2. Influence of over voltage

Over voltage that is applied to the capacitor may result in an electrical short circuit caused by the breakdown

of the internal dielectric layers .

The time duration until breakdown depends on the applied voltage and the ambient temperature.

4.Type of Applied Voltage and Self-heating Temperature

1.Confirm the operating conditions to make sure that no large current is flowing into the capacitor due to the

continuous application of an AC voltage or pulse voltage.

When a DC rated voltage product is used in an AC voltage circuit or a pulse voltage circuit, the AC current

or pulse current will flow into the capacitor; therefore check the self-heating condition.

Please confirm the surface temperature of the capacitor so that the temperature remains within the upper limits

of the operating temperature, including the rise in temperature due to self-heating. When the capacitor is

used with a high-frequency voltage or pulse voltage, heat may be generated by dielectric loss.

The load should be contained so that the self-heating

　of the capacitor body remains below 20°C ,

　whenmeasuring at an ambient temperature of 25°C.

Caution

100

0 1 2 3

Current (Ar.m.s.) 4 5 6

TemperatureRise (C)

[Example of Temperature Rise (Heat Generation) in Chip

Multilayer Ceramic Capacitors in Contrast to Ripple Current]

Sample: R(R1) characteristics 10 Rated voltage: DC10V

Ripple Current

100kHz

500kHz

1MHz

JEMCAC-00641D 8

5. DC Voltage and AC Voltage Characteristic

1. The capacitance value of a high dielectric constant type

capacitor changes depending on the DC voltage applied.

Please consider the DC voltage characteristics when a

capacitor is selected for use in a DC circuit.

1-1. The capacitance of ceramic capacitors may change

sharply depending on the applied voltage. (See figure)

Please confirm the following in order to secure the

capacitance.

(1) Determine whether the capacitance change caused

by the applied voltage is within the allowed range .

(2) In the DC voltage characteristics, the rate of

capacitance change becomes larger as voltage

increases, even if the applied voltage is below

the rated voltage. When a high dielectric constant

type capacitor is used in a circuit that requires a

tight (narrow) capacitance tolerance (e.g., a time

constant circuit), please carefully consider the

voltage characteristics, and confirm the various

characteristics in the actual operating conditions

　of the system.

2. The capacitance values of high dielectric

constant type capacitors changes depending

on the AC voltage applied.

Please consider the AC voltage characteristics

when selecting a capacitor to be used in a

AC circuit.

6. Capacitance Aging

[Example of Change Over Time (Aging characteristics) ]

1. The high dielectric constant type capacitors

have an Aging characteristic in which the capacitance

value decreases with the passage of time.

When you use a high dielectric constant type

capacitors in a circuit that needs a tight (narrow)

capacitance tolerance (e.g., a time-constant circuit),

please carefully consider the characteristics

of these capacitors, such as their aging, voltage,

and temperature characteristics. In addition,

check capacitors using your actual appliances

at the intended environment and operating conditions.

7.Vibration and Shock

1. Please confirm the kind of vibration and/or shock, its condition, and any generation of resonance.

Please mount the capacitor so as not to generate resonance, and do not allow any impact on the terminals.

2. Mechanical shock due to being dropped may cause damage or

a crack in the dielectric material of the capacitor.

Do not use a dropped capacitor because the quality and reliability

may be deteriorated.

3. When printed circuit boards are piled up or handled, the corner

　of another printed circuit board

should not be allowed to hit the capacitor in order to avoid

a crack or other damage to the capacitor.

Caution

-100

-80

-60

-40

-20

010 20 30

DC Voltage (V) 40 50

[Example of DC Voltage Characteristics]

Sample: X7R(R7) Characteristics 

Capacitance Change (%)

00.5 1

AC Voltage (Vr.m.s.) 1.5 2

[Example of AC Voltage Characteristics]

Sample: X7R(R7) Characteristics 

Capacitance Change (%)

-10

-20

-30

-40

-50

-60

Floor

Crack

Mounting printed circuit board

Crack

-10

-20

-30

-40

100

1000

10000

Time(h)

Capacitance Change(%)

C0G(5C)

X7R(R7)

X5R(R6)

JEMCAC-00641D 9

■Soldering and Mounting

1.Mounting Position

1. Confirm the best mounting position and direction that minimizes the stress imposed on the capacitor during flexing

or bending the printed circuit board.

1-1.Choose a mounting position that minimizes the stress imposed on the chip during flexing or bending of the board.

　[Component Direction]

Locate chip horizontal to the

direction in which stress acts.

(Bad Example) (Good Example)

[Chip Mounting Close to Board Separation Point]

It is effective to implement the following measures, to reduce stress in separating the board.

It is best to implement all of the following three measures; however, implement as many measures as possible

to reduce stress.

Stress Level

(1) Turn the mounting direction of the component parallel to the board separation surface.

A　>　D *1

(2) Add slits in the board separation part.

A　>　B

(3) Keep the mounting position of the component away from the board separation surface.

A　>　C

*1 A > D is valid when stress is added vertically to the perforation as with Hand Separation.

If a Cutting Disc is used, stress will be diagonal to the PCB, therefore A > D is invalid.

[Mounting Capacitors Near Screw Holes]

When a capacitor is mounted near a screw hole, it may be affected by the board deflection that occurs during

the tightening of the screw. Mount the capacitor in a position as far away from the screw holes as possible.

2.Information before Mounting

1. Do not re-use capacitors that were removed from the equipment.

2. Confirm capacitance characteristics under actual applied voltage.

3. Confirm the mechanical stress under actual process and equipment use.

4. Confirm the rated capacitance, rated voltage and other electrical characteristics before assembly.

5. Prior to use, confirm the solderability of capacitors that were in long-term storage.

6. Prior to measuring capacitance, carry out a heat treatment for capacitors that were in long-term storage.

7.The use of Sn-Zn based solder will deteriorate the reliability of the MLCC.

Please contact our sales representative or product engineers on the use of Sn-Zn based solder in advance.

Caution

Contents of Measures

Screw Hole Recommended

①

②

③

Perforation

Slit

①

JEMCAC-00641D 10

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Murata Industrieelektrik Handbücher

Murata

Murata GQM1555C2D130FB01 Series Bedienungsanleitung

Murata

Murata GJM0335C1E3R8WB01 Series Bedienungsanleitung

Murata

Murata GRM0225C1E5R2BA03 Series Bedienungsanleitung

Murata

Murata GQM2195C1H470JB01 Series Bedienungsanleitung

Murata

Murata GRM319R71E684MA01 Series Bedienungsanleitung

Murata

Murata GRM0225C1E7R1CA03 Series Bedienungsanleitung

Murata

Murata GRM0335C1H5R5CA01 Series Bedienungsanleitung

Murata

Murata GRM1555C1E4R4CA01 Series Bedienungsanleitung

Murata

Murata GRM022R60J224ME14 Series Bedienungsanleitung

Murata

Murata GRM0335C1H8R3CA01 Series Bedienungsanleitung

Murata

Murata GQM22M5C2HR50CB01 Series Bedienungsanleitung

Murata

Murata GRM31CR71H475MA12 Series Bedienungsanleitung

Murata

Murata GRM1555C1H201JA01 Series Bedienungsanleitung

Murata

Murata GRM219R61C225KA88 Series Bedienungsanleitung

Murata

Murata GRM188R61A474MA61 Series Bedienungsanleitung

Murata

Murata GJM1555C1H8R6DB01 Series Bedienungsanleitung

Murata

Murata GQM2195C2E8R0BB12 Series Bedienungsanleitung

Murata

Murata GRM32ER71K475ME14 Series Bedienungsanleitung

Murata

Murata GRM1885C2A111JA01 Series Bedienungsanleitung

Murata

Murata GRM0225C1E9R5BA03 Series Bedienungsanleitung

Murata

Murata GQM22M5C2H1R5BB01 Series Bedienungsanleitung

Murata

Murata GRT188R60J225ME13 Series Bedienungsanleitung

Murata

Murata GRM155R71H562KA88 Series Bedienungsanleitung

Murata

Murata GRM0335C1H121JA01 Series Bedienungsanleitung

Beliebte Industrieelektrik Handbücher anderer Marken

Rexroth Indramat

Rexroth Indramat DURADRIVE SYSTEM200 Technisches Handbuch

Abtech

Abtech HVJB Series Leitfaden

SAF-HOLLAND

SAF-HOLLAND CBX 5415.5 Bedienungsanleitung

Eaton

Eaton Ulusoy HMH24-04 Bedienungsanleitung

Newlong

Newlong NP-7H Bedienungsanleitung

Stahl

Stahl 8575/12 Bedienungsanleitung

SI Pegasus Bedienungsanleitung

Cooper Power Systems

Cooper Power Systems VXE15 Bedienungsanleitung

S&C

S&C Vista SD Bedienungsanleitung

Siemens

Siemens 3VA9988-0BM10 Bedienungsanleitung

Siemens

Siemens SITRANS LVS100 Bedienungsanleitung

Rockwell Automation

Rockwell Automation Allen-Bradley MP-Series Bedienungsanleitung

Phasemation

Phasemation DG-100 Bedienungsanleitung

Eaton

Eaton 10250T/E34 Handbuch

Bticino

Bticino LN4572 Bedienungsanleitung

ABB

ABB System pro E power Handbuch

WPI

WPI STX2-PLUS Bedienungsanleitung

Cooper Power Systems

Cooper Power Systems GH Technische Daten