1. For best performance, please read
this manual carefully. Keep it in a safe
place for future reference.
2. Install the unit in a cool, dry, clean
place away from windows, heat
sources, intense vibration, dust,
humidity, cold, and sources of
humming (transformers, motors,
etc.).. To prevent fire or shock hazard
do not expose the unit to water and
moisture.
3. Never open the equipment. If
something should get into all 'inside,
contact your dealer.
4. Do not operate the switches and
other controls with force. When
moving the unit, first disconnect the
power cord and cables connected to
other devices. Never pull the wires
themselves.
5. The voltage used must be
specified.
Using this product with a current
whose voltage is higher than
specified is dangerous and may cause
fire or other damage. EAM LAB is not
responsible for any damage due to an
incorrect use of the appliance
6. Always set the VOLUME control to
min. before starting playback of the
audio source. Gradually increase the
volume to an appropriate level after
playback has started.
7. Do not clean the unit with
chemical solvents: this could ruin the
finish. Instead, use a soft, dry cloth or
denatured alcohol.
8. In case of malfunction, before
concluding that the unit needs to be
repaired, consult the chapter on
"TROUBLESHOOTING".
9. If you are not using the unit for
long periods of time (eg for a
vacation), disconnect the power plug
10. During thunderstorms,
disconnect the power cord to avoid
any lightning damage the unit.
11. Grounding or Polarization: take
the necessary precautions to ensure
that the grounding or polarization are
not canceled.
