MUTOH UniFixer 65 Bedienungsanleitung

User’s Guide

User’s Guide Unifixer 65

AP-75393 - Revision 1.1 3

Mutoh Europe nv reserves the right to modify the information contained in this manual at any

time without prior notice.

This document may not be reproduced by any means, in whole or in part, without written

permission of the copyright owner.

Mutoh furnished this document to support the Unifixer 65. In consideration of the furnishing of

the information contained in this document, the party to whom it is given, assumes its custody

and control and agrees to the following:

The information herein contained is given in confidence, and any part thereof shall not be

copied or reproduced without written consent of Mutoh Europe nv

This document or the contents herein under no circumstances shall be used in the

manufacture or reproduction of the article shown and the delivery of this document shall not

constitute any right or license to do so.

1 April 2010

Published: Mutoh Europe nv, Archimedesstraat 13, B-8400 Oostende, BELGIUM

www.mutoh.eu

User’s Guide Unifixer 65

4AP-75393 - Revision 1.1

IMPORTANT NOTICE

Trademarksmentionedinthisguide

Mutoh, Unifixer 65 are registered trademarks or product names of Mutoh Europe nv.

Windows95, Windows98, Windows NT4.0, Windows2000, Windows XP, and MS-DOS are

registered trademarks or product names of Microsoft Corporation.

Other company and product names may be registered trademarks or product names.

Note

The product and the contents of this publication may be changed without prior

notification.

Mutoh Europe nv has made the best efforts to keep this publication free from

errors, but if you find any uncertainties or misprints, please contact the reseller

from which you bought this equipment or email us: [email protected].

Mutoh Europe nv shall not be liable for any damages or troubles resulting from

the use of this equipment or this guide.

User’s Guide Unifixer 65

AP-75393 - Revision 1.1 - 1/4/10 5

Table of contents

Chapter 1 Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

1.1 Compliance with the following regulations . . . . . . . . . . . . . . . 7

1.2 Managing fumes and vapours . . . . . . . . . . . . . . . . . . . . . . . . . . 8

1.3 Warnings, cautions and notes. . . . . . . . . . . . . . . . . . . . . . . . . . 8

1.4 Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Safety mechanisms. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

1.5 Safety labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Chapter 2 Unpacking the machine . . . . . . . . . . . . . . . . . . . . . . 13

2.1 In-the-box contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

2.2 Unpacking procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Chapter 3 Installing the Unifixer 65 . . . . . . . . . . . . . . . . . . . . . 19

3.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Installation environment requirements . . . . . . . . . . . . . . . . . . . . . . . 19

3.2 Securing the Unifixer 65 in its end location . . . . . . . . . . . . . . 20

3.3 Installing the feeding tray. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

3.4 Installing the heating element . . . . . . . . . . . . . . . . . . . . . . . . . 23

3.5 Connecting an air filter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Chapter 4 Product overview . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

4.1 Front view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

4.2 Rear view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

User’s Guide Unifixer 65

AP-75393 - Revision 1.1 - 1/4/10 6

4.3 Operation panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

4.4 Overview technical specifications. . . . . . . . . . . . . . . . . . . . . . 36

Overview recommended exposure time . . . . . . . . . . . . . . . . . . . . . 36

Chapter 5 Basics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

5.1 Powering ON / OFF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Powering ON . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Powering OFF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

5.2 Emergency stop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Emergency reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

5.3 Loading media. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Loading media for transfer paper printing . . . . . . . . . . . . . . . . . . . . 40

Loading media for fixing direct printed fabric . . . . . . . . . . . . . . . . . 50

5.4 Adjustments and recommendation. . . . . . . . . . . . . . . . . . . . . 59

Temperature adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Speed adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Media tension adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

5.5 Transportation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Short distance transportation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Long distance transportation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Chapter 6 Periodical maintenance . . . . . . . . . . . . . . . . . . . . . . 63

6.1 Done by the end user.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Cleaning the felt belt. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

User’s Guide Unifixer 65

Safety instructions

AP-75393 - Revision 1.1 7

Chapter1Safety instructions

This chapter explains the installation of Unifixer 65, warning terms that operators need to

know, caution items and warning labels on the main unit.

1.1 Compliance with the following regulations

Important

When installing and operating the Unifixer 65, be sure to follow the directions

and warnings in this guide.

The CE marking is a mandatory European marking for certain

product groups to indicate conformity with the essential health and

safety requirements set out in European Directives.

By affixing the CE marking, the manufacturer, his authorized

representative, or the person placing the product on the market or

putting it into service ensures that the item meets all the essential

requirements of all applicable EU directives and that the applicable

conformity assessment procedures have been applied.

Your product is designed and manufactured with high-quality

materials and components, which can be recycled and reused.

When this crossed-out wheeled bin submenu is attached to a

product, it means the product is covered by the European Directive

2002/96/EC - WEEE regulation.

Please inform yourself about the local separate collection system for

electrical and electronic products.

Please act according to local rules and do not dispose of your old

products with your normal household waste. The correct disposal of

your old product will help prevent potential negative consequences

for the environment and human health.

User’s Guide Unifixer 65

Safety instructions

8AP-75393 - Revision 1.1

1.2 Managing fumes and vapours

When the unit is used for transferring from paper to fabric, no fumes or vapours need to be

taken care of.

During the fixation process of directly printed fabrics however, depending on the ink type

and fabric used, hot fumes & vapours may be released.

In order to protect human health, these fumes and vapours need to be managed. To do

this, an air purification system (APS) needs to be connected.

Be aware that the released fumes and vapours will be hot. When cooling down they

will condensate.

When using a Mutoh APS this condensate will be managed. Regarding the use and

maintenance of the proper Mutoh APS, please consult the Mutoh APS user manual.

When using a non-Mutoh APS, you will need to make sure that these liquids do not

damage your APS.

Because of differences in the local regulations and required working conditions, it is wise

to consult a local consultancy agency to determine the involved regulations.

1.3 Warnings, cautions and notes

Safety terms in this manual and the contents of warning labels attached to the Unifixer 65 are

categorized into the following three types, depending on the degree of risk (or the scale of

accident).

Read the following explanations carefully and follow the instructions in this manual.

Safety terms Details

Important Must be followed carefully to avoid death or serious bodily injury.

Caution Must be observed to avoid bodily injury (moderate or light) or damage to

your equipment.

Notes Contains important information and useful tips on the operation of your

Unifixer 65.

User’s Guide Unifixer 65

Safety instructions

AP-75393 - Revision 1.1 9

1.4 Safety instructions

Machines must be installed according to Mutoh’s installation procedure also after

moving machines to another location: maintenance needs to be done according to the

service manual.

To prevent fire or electrical shock, never use a power supply source other than the one

rated for the product in the country where you purchased the product.

Use only the provided power cable. To prevent fire or electrical shock, follow the

instructions below when handling the power cable:

Do not cut or modify the cable.

Do not put heavy objects on the cable.

Do not bend, twist, knot or pull the cable.

Do not wire the cable near equipment that generates heat.

Do not use the cable with any other electrical device

Do not handle the cable with wet hands

Be aware of all caution and warning labels to avoid potentially hazardous situations.

To prevent fire or electrical shock, machines must be connected to a properly grounded

electrical power outlet. Do not connect the power cable to a power strip or a power source

shared by other electrical devices.

Make sure that no foreign substances such as dust etc. are stuck to the power plug.

Make sure that the power plug is firmly inserted to the edge of the power socket.

Do not plug to a multi-socket plug

Do not leave the electric lead in contact with a warm surface.

Do not use extension cord with a small diameter section not corresponding to the power of

the machine

To unplug the machine, disconnect the plug without pulling on the supply lead.

Do not disable any safety precautions systems.

Do not operate the unit unless all parts are mounted.

Do not place the machine in the following areas. Doing so may result in the machine

tipping or falling over and causing injury.

Unstable surfaces

Sloping floors

Areas subject to vibration by other equipment

Do not stand on or place heavy objects on your machine. Doing so may result in the

machine tipping or falling over and causing injury.

User’s Guide Unifixer 65

Safety instructions

10 AP-75393 - Revision 1.1

Do not place the machine in humid and dusty areas, close to water or in areas exposed to

flammables. Doing so may result in electrical shock or fire.

Do not insert or drop metal or inflammable objects into openings, such as ventilation

outlets. Doing so may result in electrical shock and fire.

Do not touch the media guide during operation.

Stop using your machine if a liquid has been spilled into it. This may cause electrical

shock or fire. Switch the machine off as soon as possible, unplug the power cord, and

contact your local Mutoh dealer.

Do not use the machine if the supply lead is damaged.

Be sure to power OFF the machine and unplug the power cable from the outlet before

cleaning the machine. Use a damp cloth to clean the machine. Do not use thinner,

benzene, alcohol or other active agents.

Do not tilt the machine, place it against a wall or turn it upside down. Movement after

transport is also not covered by the warranty.

When cutting roll media, be careful. Incorrect handling can result in injury to the hands and

fingers from the razor blade.

To prevent back pains and other injuries, always work with at least 2 people to unpack or

move the machine. Keep the machine horizontally during transportation.

when using the screw jack while unloading the machine, ensure the screw jack is laying

well flat on the pallet floor and prevent it from slipping and sliding

Do NOT transport the machine to another room without contacting your local Authorized

Mutoh Dealer.

At least 2 persons are required for installing the feeding tray

To install the heating element, it is necessary to open both sides of the machine. This

should be done by a skilled and approved technician.

While installing the heater element, ensure the machine is not plugged in to the power

The machine should be installed in a well-ventilated place.

The dye sublimation heat transfer calender works with high temperature. It is

recommended not to leave the workshop till it has come down to the ambient temperature

In order to preserve the equipment, use only material that are suitable for heat transfer.

Adjust the working temperature according to the media you are using.

Do not feed material that would not stand excess amount of heat with a risk of burning or

melting when exposed to too much heat - i.e. Adhesive tape.

Andere Handbücher für UniFixer 65

Inhaltsverzeichnis

Andere MUTOH Drucker Handbücher

MUTOH

MUTOH ValueJet VJ-1604 Bedienungsanleitung

MUTOH

MUTOH ValueJet VJ1324X Bedienungsanleitung

MUTOH

MUTOH ValueJet VJ-1604 Bedienungsanleitung

MUTOH

MUTOH RJ600EX-B-01 Bedienungsanleitung

MUTOH

MUTOH ValueJet VJ-1604 Betriebsanleitung

MUTOH

MUTOH ValueJet VJ-1624 Bedienungsanleitung

MUTOH

MUTOH VJ-628 ValueJet Benutzerhandbuch

MUTOH

MUTOH ValueJet Bedienungsanleitung

MUTOH

MUTOH Spitfire 100 Extreme Bedienungsanleitung

MUTOH

MUTOH 1682WR Bedienungsanleitung

MUTOH

MUTOH ValueJet VJ-1204 Bedienungsanleitung

MUTOH

MUTOH ValueJet VJ-1624 Bedienungsanleitung

MUTOH

MUTOH Spitfire 100 Extreme Bedienungsanleitung

MUTOH

MUTOH VJ-426UF Benutzerhandbuch

MUTOH

MUTOH ValueJet VJ-1324 Bedienungsanleitung

MUTOH

MUTOH ValueJet VJ-1604 Bedienungsanleitung

MUTOH

MUTOH VJ-1628TD Bedienungsanleitung

MUTOH

MUTOH Rockhopper II Series Bedienungsanleitung

MUTOH

MUTOH ValueJet VJ-1624X Bedienungsanleitung

MUTOH

MUTOH XpertJet XPJ-1641SR Benutzerhandbuch

MUTOH

MUTOH ValueJet VJ-1604 Bedienungsanleitung

MUTOH

MUTOH Rockhopper 3 Extreme Bedienungsanleitung

MUTOH

MUTOH PJ-1614NXE Bedienungsanleitung

MUTOH

MUTOH valuejet 1614 Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Brother

Brother 1440 - HL B/W Laser Printer Kurzanleitung

Fuji Xerox

Fuji Xerox DocuPrint P375 dw Bedienungsanleitung

WOOSIM

WOOSIM PORTI-S30 Bedienungsanleitung

Olivetti

Olivetti PG L2140 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 224e Bedienungsanleitung

Canon

Canon LBP113w Bedienungsanleitung

Xerox

Xerox DocuColor 5000 Bedienungsanleitung

Canon

Canon PRO-500 Series Einrichtungshandbuch

Epson

Epson ET-7750 Betriebsanleitung