MUTOH RJ-900X series Bedienungsanleitung

RJ900XE-I-00

RJ-900X series INSTALLATION MANUAL

Please read this manual

before using

Thank you for purchasing a MUTOH product.

This manual explains the steps for unpacking,

mounting and basic installation before using

the MUTOH Full-color inkjet printer RJ-900X

series.

This manual is intended for owners, installers,

and users of this product.

Understand the contents and instructions in this

manual before installing this product.

Installation flow chart

The broad steps for installation are shown below.

Follow the instructions beginning on the next

page.

The stands are optional depending on the

product and regions.

Unpacking boxes1

Unpacking the printer box1.1

Unpacking the stand box1.2

Confirming bundled items2

Items in the printer box2.1

Items in the attachment box2.2

Items in the stand box2.3

Assembling3

The stand assembling procedure3.1

Assembling the stand3.2

Detaching protective materials3.3

Installation4

Installation environment4.1

Installation procedure4.2

Connecting the power cable5

Turning the power ON/OFF6

Activating the printer7

Setting the display language8

Installing the ink cartridge9

Loading the media10

Loading the roll media10.1

Loading the sheet media10.2

Check the printing condition11

Installing the printer driver12

About printer driver13

Manual composition14

NOTE

8IFOVTJOHUIFQSJOUFSPOMZ

RJ-900X series INSTALLATION MANUAL

RJ900XE-I-00 2

Unpacking boxes1

Procedures for unpacking boxes are explained.

This product is packaged separately, divided

into the printer and the stand.

Unpacking this product requires the

・

following number of people.

RJ-901X : Two or more

･

RJ-900X : Three or more

･

While taking out the printer from the box,

・

make sure to remove the vinyl sheet

Unpacking printer box1.1

Unpack the printer box in accordance with the

following steps.

Carry the box to where you will unpack it.

Remove the bands.

Open the box and take out the following

components.

Installation Manual (this manual)・

Attachment box・

Scroller・

Unpacking stand box1.2

Unpack the stand box in accordance with the

following steps.

Carry the box to where you will unpack it.

Open the box and take out the components.

Confirming bundled items2

After unpacking, please confirm that the product

has not damaged and no components are miss-

ing.

If anyitems are damaged or missing, con-

tact MUTOH local dealer.

Items in the printer box2.1

(1) RJ-901X

(2) RJ-900X

Items in the attachment box2.2

Items in the stand box2.3

The stands are optional depending on the

product and regions.







No. Name Q'ty

1 Printer main body 1 set

2 A1 Scroller 2 inch 1

3 Installation Manual (this manual) 1







No. Name Q'ty

1 Power cable 1

2 Drivers and Manuals CD-ROM 1





No. Name No. Name

1 Printer box 4 Handles (RJ-901X only)

2 Scroller 5 Attachment box

3 Packing material 6 Installation Manual

(this manual)

















3+9

3+9



No. Name Q'ty

1 Left support 1

2 Right support 1

3 Caster section (left, right) 2

4 Central beam 1

5 Hexagon socket head cap screw 8

6 Butterfly bolt 2

7 Hexagonal wrench 1







 

No. Name Q'ty

1 Printer main body 1 set

2 A0 Scroller 2 inch 1

3 Installation Manual (this manual) 1

CAUTION

NOTE

RJ-900X series INSTALLATION MANUAL

RJ900XE-I-00

Assembling3

Procedures for assembling this product are

explained.

Unpacking this product requires the

・

following number of people.

RJ-901X : Two or more

・

RJ-900X : Three or more

・

The stand assembling procedure3.1

If you will use the stand, assemble it in accor-

dance with the following steps.

Follow the steps shown below to assemble

the right side of the stand.

Install the (right) support to the leg so that

the caster with the lock is on the front.

Fasten two hexagon socket head cap screws

with the enclosed hexagonal wrench.

Assemble the left side of the stand in a simi-

lar way to step 1.

Follow the steps shown below to attach the

central beam to the legs (left, right).

a. Attach the central beam and four hexagon

socket head cap screws to the stand (the

left, the right).

Fasten the hexagon socket head cap screws

with the enclosed hexagonal wrench, and

fasten the central beam.

Attach two arm holders to the legs (left,

right).

Confirm that each component is fastened

firmly by gently shaking the stand.

Assembling the stand3.2

Attach the stand to the printer in accordance

with the following steps.

Lock two casters on the front side.

Lift the printer main body, and align the rear

side rubber feet to the holes of the stand.

Attach two butterfly bolts to the stand.

Secure the printer to the stand by bolting the

butterfly bolts.

This completes assembling of the stand.・

No. Name No. Name

1 Right support 3 Caster section

2 Caster lock 4 Hexagon socket head

cap screws









No. Name No. Name

1 Lerft support 3 Caster section

2 Caster lock 4 Hexagon socket head

cap screws









No. Name No. Name

1 Central beam 3 Leg (right)

2 Leg (left) 4 Hexagon socket head

cap screw









No. Name No. Name

1 Casters 2 Caster locks

















No. Name No. Name

1 Grips 2 Rubber feet

No. Name No. Name

1 Printer main body 2 Holes of the stand



No. Name

1 Butterfly bolts

CAUTION

RJ-900X series INSTALLATION MANUAL

RJ900XE-I-00 4

Detaching protective materials3.3

This product has protective materials in the

place shown below.

Detach all protective materials in accordance

with the following steps.

Remove all tapes from each cover.

Open the front cover and unscrew the but-

terfly screws, and detach the fixing head unit

protective materials (metal plate).

This completes detaching protective materials.・

Installation4

Procedures and environment for installing this

product are explained.

Installation environment4.1

Install this product to the appropriate place with

reference to the following.

Do not install the printer in the follow-

ing places where there is a possibility

that the printer may be damaged or

might fall or be fallen by chance.

On a shaky stand•

Slanting location•

Places where vibration of other ma-•

chines etc. is transmitted.

Do not stamp on the printer or do

not place heavy things on top of it. It

may cause an injury if the printer falls

down.

Cover the printer with blanket and

cloth like tablecloth and do not close

the vent. If the vent is closed, the

printer could accumulate heat inside

and may cause fire.

Do not install the printer in a location

that has high humidity or is dusty. It

could lead to electric shock and fire.

Installation environment4.1.1

Select an installation location in accordance

with the table below.

For temperature and humidity, avoid locations

such as the following. There is a possibility

that the print quality will be affected.

Places where temperature or humidity may

・

rapidly change, even though within the re-

quired conditions.

Place that receives direct sunlight or strong

・

illumination light

Place that receives direct wind from an air

・

conditioner, and so on

To keep the temperature and humidity con-

stant, install this product in a location where

the air condition is adjstable.

Installation space4.1.2

When using the printer with the stand・

Install on a level floor which meets the following

condition.

It has enough strength to support the weight・

of the printer and the stand.

For the weight of the printer and the stand,

refer to the Operation Manual.

When using the printer only (RJ-901X)・

Install on a level table that meets the following

conditions.

The table has enough strength to support the・

weigh of the printer.

For the weight of the printer, refer to the Op-

eration Manual.

The required length for the sheet media is・

available in the back.

The heig ht f rom the f loor is 60 0 mm to・

800 mm.

The space in the front is more than 300 mm.・

Printed sheets are not folded or dirtied.・

3+9

BNN

CNN

DNN

ENN

FNN

3+9

BNN

CNN

DNN

ENN

FNN

BNN

CNN

DNN

ENN

FNN

GNN



Floor strength of instal-

lation place

More than 2940 Pa (300 kg/m2)

Power

Specifica-

tion

Power Sup-

ply

AC90V - 132V/198V - 264V

Frequency

Range

50/60Hz ±1Hz

Power

capacity

More than 10 A

Environ-

mental

conditions

Operative

condition

Temperature:10 °C-35 °C

Humidity: 20 % - 80 %, No Condensation

Guaranteed

range of

printing

accuracy

Temperature:15 °C - 28°C

Humidity: 40 % - 60 %, No Condensation

Change rate Temperature: within 2 °C per hour

Humidity: within 5 % per hour

No. Name No. Name

1 Fixing head unit protec-

tive materials (metal

plate)

2 Butterfly screw

NOTE

WARNING

NOTE

RJ-900X series INSTALLATION MANUAL

RJ900XE-I-00

Installation procedure4.2

Install this product to the installation place in

accordance with the list shown below.

When using the printer4.2.1

with the stand

Please check that the butterfly bolts are not

loose before/after carrying this product.

When transferring or carrying outside, sepa-

rate the printer and the stand.

Check that the two butterfly bolts attaching

the stand and the printer are not loose.

Carry the printer to the installation place.

Lock two casters on the front side.

Check that the two butterfly bolts attaching

the stand and the printer are not loose.

When using the printer4.2.2

only (RJ-901X)

Install the printer so that the rubber foot (front) of

the product is placed on the front of the board.

zWhen using the printer only (without the

stand), always arrange as shown below.

There is a possibility that the printed sheets

are affected or errors such as media jams oc-

cur.

Connecting the power cable5

This section explains how to connect the power

cable. Follow the steps below to connect the

power cable.

Be sure to use the specified power

cable. Using a power cable other than

the specified can cause an electric

shock or fire.

Use the power cable compliant with

the safety standards, power-supply

voltage, and plug shape of the country

where the printer is used.

Use a power cable which is equipped

with a protective earth, and securely

connect it to the outlet.

Do not use a damaged power cable. It

could lead to an electric shock or fire.

Confirm that the product is turned OFF.

Connect the power cable to the AC inlet on

the back of the product.

Correctly insert the power cable plug into the

power socket.



No. Name

1 Power cable

No. Name No. Name

1 Casters 2 Caster locks





No. Name

1 Rubber feet



No. Name No. Name

1 AC inlet 2 Power cable





NOTE

WARNING

RJ-900X series INSTALLATION MANUAL

RJ900XE-I-00 6

Turning the power ON/6

OFF

This section explains how to turn the printer

ON/OFF.

Turning the power ON6.1

Follow the procedure below to turn the power

ON.

Press the [Power] key on Operation panel to

turn ON the printer.

Power lamp on Operation panel lights up in・

blue.

The printer starts the initial operation.・

When the initial operation is complete, the・

printer enters the Normal condition.

Turning the power OFF6.2

Follow the procedure below to turn the printer OFF.

Verify the following regarding the opera-

tional condition of the printer.

Printing or other operations are not in prog-・

ress.

Operation panel display is Normal.・

Press the [Power] key on Operation panel to

turn OFF the printer.

Power lamp on Operation panel turns OFF.・

If Operation panel is in the following status,

the power is ON.

The [Power] key is pressed in.

・

Power lamp is ON.

・

Press the key once again to turn the power

OFF.

The printer turns the power OFF.・

When the media is set, “Lift the lever”is dis-

played on Operation panel.Raise Media load-

ing lever.

“Wait for a while...”is displayed on Operation・

panel.

All the lamps on Operation panel and the LCD・

monitor are turned OFF.

The printer automatically turns the power OFF.・

After turning OFF the printer, wait for ten sec-

onds or longer to turn it ON again.

If you are not using the printer for a long

time, raise Media loading lever.

Activating the printer7

This product requires activation when the power

is turned ON for the first time.

When “Activation required”is displayed on

Operation panel, follow the “Printer activation

guide”* and perform activation.

*Download the “Printer activation guide”from

the following ValueJet Club.

https://mbss.mutoh.co.jp/mutoh/guser/

No. Name

1 Media loading lever



NOTE

RJ-900X series INSTALLATION MANUAL

RJ900XE-I-00

Setting the display language8

After activation is complete, you need to make

the language setting when restarting the product.

Follow the procedures below to make setting.

Once activation is complete, “Reboot a

printer”is displayed on Operation panel.

Press the [Power] key on Operation panel

and turn OFF the printer.

Press the [Power] key on Operation panel to

turn ON the printer.

“Language: Japanese”is displayed on Opera-・

tion panel.

Press the [Enter] key.

Press the [+] key or [-] key on Operation panel・

to select a setup item and press the [Enter]

key.

This completes the setting of display lan-・

guage.

The printer starts the initial operation.・

When the initial operation is complete, the・

printer enters Normal.

Installing the ink cartridge9

This section explains about how to install the

ink cartridge. Follow the steps below to install the

ink cartridge.

While handling ink cartridges, be care-

・

ful that the ink does not come into

contact with your eyes or skin. If the

ink got into your eyes or attached to

the skin, immediately wash with water.

Failing to do so may cause irritation

and light inflammation of the eyes. In

case of any abnormality, consult a phy-

sician immediately.

Turn ON the product.

The product starts the initial operation.

The operation panel displays “No ink cart-・

didge ****”

Take out the ink cartridge from the bag.

Install the ink cartridge into the ink cartridge

slot.

Insert the ink cartridge into the product with・

mark upside.

Insert the ink cartridge all the way to the end

of the slot.

Insert all four ink cartridges.

Make sure that the ink cartridges are inserted

into the correct slots. Match the mark in front

of the slot and the color of the ink before in-

serting the ink cartridge.

Ink cartridges are structured to avoid wrong

insertion.If you cannot insert the ink cartridg-

es into the slot smoothly, you may be inserting

it into a wrong slot. Do not insert it forcefully.



  

No. Name No. Name

1 Ink cartridge 4 Ink cartridge slot M

2 Ink cartridge slot K 5 Ink cartridge slot Y

3 Ink cartridge slot C

NOTE

RJ-900X series INSTALLATION MANUAL

RJ900XE-I-00 8

“Ink Refill ** min”is displayed, and the ink

starts the Initial ink charge.

It takes about 5 minutes. In the initial opera-・

tion, the product repeats ink filling and paus-

ing.

Comply strictly with the following dur-

・

ing ink filling.

Do not turn the printer OFF.

･

Do not unplug the power cord set of

･

the printer.

Do not open the front cover.

･

Do not open the maintenance cover.

･

Do not raise the media loading lever.

･

If the ink finishes being filled, the operation

panel displays “Paper End”.

If the paper is printed just after the initial fill-

ing, the following conditions may occur.

The printed line is blurred.

・

The white line appears on the prints.

・

In such cases, refer to the following to refill a

small amount of ink, and then check the print-

ing result.

Operation manual “5.2.3 Head Cleaning”

If there is no improvement in the print result

even after refilling a small amount of ink,

leave the printer unused for an hour or more.

Then, refill a small amount of ink again and

check the print result.If the print result still

remains the same, contact the following.

Operation panel “7.4.2 Technical Support”

Loading the media10

Loading the roll media10.1

This section explains about how to load the roll media.

Put the roll media in the center of the printer.

Follow the steps to load the media.

When using roll media of three-inch di-

ameter media tube, the optional three-inch

attachment should be used to the movable

flange and fixed flange.

Load the roll media into the scroller so that

the roll media gets winded up in the anti-

clockwise direction in the view from the

fixed flange side.

Push the roll media completely until the roll

media core hits the right edge of the fixed flange.

Attach the movable flange until it firmly

sticks to the roll media core.

Set the scroller onto the scroller receiver so

that the fixed flange heads for the ink car-

tridge side.

Turn ON the product.

The product starts the initial operation.・

The operation panel displays “Paper End”.・

Select “Roll media”by pressing [ 前] key on

the operation panel.

Roll media lamp lights up.・

Push the media loading lever backward.

The operation panel displays “Lever Up”.・

Feed the roll media into the media feed slot.

Open the front cover, and pull out the roll

10.

media.





















No. Name No. Name

1 Roll media 2 Media feed slot

No. Name No. Name

1 Scroller 3 Ink cartridge slot

2 Fixed flange 4 Scroller receiver





No. Name No. Name

1 Movable flange 3 Three-inch attachment

2 Fixed flange

No. Name No. Name

1 Movable flange 2 Roll media

No. Name No. Name

1 Movable flange 2 Roll media

No. Name

1 Media loading lever

No. Name No. Name

1 Front cover 2 Roll media







CAUTION

NOTE

RJ-900X series INSTALLATION MANUAL

RJ900XE-I-00

Wind back the roll media with scroller while

11.

pressing down the media edge, remove bend-

ing and slant of the media.

Return the media loading lever to your front,

12.

and close the front cover.

The operation panel displays the media type・

setup menu.

Press the [Setting value +] key or [Setting

13.

value -] key on the operation panel, and enter

the selected number.

The media type is entered.・

The operation panel displays “Paper Initial”,・

and media starts the initial operation.

After finishing the media initial operation, the・

operation panel displays “Ready to Plot”, and

the product turns to a normal operation.

Wind back the roll media with scroller to

14.

remove bending and slant of the media.

The media loading is complete.・

Loading the sheet media10.2

This section explains about how to load the sheet

media.

Follow the steps below to load the sheet media.

Turn ON the product.

The product starts the initial operation.

The operation panel displays “Paper End”.・

Select “Sheet media”by pressing [ 前] key

on the operation panel.

Sheet media lamp lights up.・

Push the media loading lever backward.

The operation panel displays “Lever Up”.・

Open the front cover, and insert the sheet

media in to the media feed slot.

Align the right end of media to the media

loading mark, and align the front edge to the

step of platen respectively.

If the sheet media right end shifts either to

the right or the left from the loading mark, it

would become as media loading error without

media being detected.

Load the media within the

z±5 mm range from

the loading mark.

Return the media loading lever to your front

and close the front cover.

The operation panel displays the media type・

setup menu.

In the same way as step 13 in “10.1 Loading

the roll media”, make the media type setting.

When the media type is entered, the operation・

panel displays “Paper Initial”, and media starts

the initial operation.

After finishing the media initial operation, the・

operation panel displays “Ready to Plot”, and

the product turns to a normal operation.

The media loading is complete.・

 









No. Name No. Name

1 Roll media 2 Scroller

No. Name No. Name

1 Media loading lever 2 Front cover

No. Name

1 Media loading lever

No. Name No. Name

1 Roll media 2 Scroller

No. Name No. Name

1 Media loading lever 2 Front cover

 





No. Name No. Name

1 Front cover 2 Sheet media

No. Name No. Name

1 Sheet media 3 Step of platen

2 Media loading mark









NOTE

RJ-900X series INSTALLATION MANUAL

RJ900XE-I-00 10

Check the printing condition11

Check the print head condition after ink initial

filling.

Turn ON the power to the printer, and set A3

or larger sheet media or roll media.

10. Loading the media

Check that “Ready to Print”is displayed on

Operation panel.

Press the [Menu] key on the operation panel.

“*Menu* TestPlot >”is displayed on the opera-・

tion panel

Operation panel shifts to the Setup menu display.・

Press the [Enter] key on Operation panel .

“TestPlot: SetupPlot”is displayed on the op-・

eration panel

Display shifts to Test print menu.・

Press the [Setting value +] key or [Setting

value-] key on the operation panel, select

“Nozzle check”and press the [Enter] key.

Perform the nozzle check printing.・

Check the print sample and confirm that the

checked points are blurred or missing.

If the nozzle check result indicates that the

checked points are blurred or missing, clean

the head.

Press the [Cleaning] key on the operation・

panel for at least 2 seconds.

“Cleaning ** min”is displayed on the opera-・

tion panel.

Start head cleaning.

If print blurs or incomplete printing is not

fixed by one head cleaning, perform strong

cleaning.

If several head cleanings does not remove

print blur or incomplete printing, refer to the

following and perform required procedures.

Operation Manual "6 Troubleshooting"

Perform the nozzle check again, and confirm

the print head condition.

Installing the printer driver12

For network connection12.1

This section explains how to connect to the

Internet (TCP/IP).

Turn ON the power to the printer.

Set the IP address for the printer.

For the procedure to set IP addresses, refer to

“3.6.5 Setting IP Addresses”in the Operation

manual.

You can view the Operation manual from the

CD-ROM (“Drivers and Manuals CD-ROM”)

included with the product.

The language preference screen is displayed

・

when you start the CD-ROM.Click the lan-

guage you want, and then click “Viewing

the Operation manual”on the next screen.

Insert the network interface cable connector

into the network interface connector located

on the back of the printer.

Fix the network interface cable to the cable

clamp.

Connect the another network interface cable

connector to the PC.

Turn ON the power to the PC.

NOTE





No. Name No. Name

1 Network interface cable 2 Cable clamp

No. Name No. Name

1 Network interface cable 2 Network interface con-

nector





NOTE

Inhaltsverzeichnis

Andere MUTOH Drucker Handbücher

MUTOH

MUTOH Rockhopper 38 Bedienungsanleitung

MUTOH

MUTOH VJ-2606 Betriebsanleitung

MUTOH

MUTOH ValueJet 1324 Bedienungsanleitung

MUTOH

MUTOH ValueJet VJ-1624 Bedienungsanleitung

MUTOH

MUTOH Spitfire 100 Extreme Bedienungsanleitung

MUTOH

MUTOH Rockhopper 3 Extreme Betriebsanleitung

MUTOH

MUTOH DrafStation RJ-900X Bedienungsanleitung

MUTOH

MUTOH Viper TX Bedienungsanleitung

MUTOH

MUTOH ValueJet VJ-1324 Bedienungsanleitung

MUTOH

MUTOH ValueJet VJ-1204 Bedienungsanleitung

MUTOH

MUTOH Blizzard Bedienungsanleitung

MUTOH

MUTOH ValueJet Bedienungsanleitung

MUTOH

MUTOH RJ-900 Service-Handbuch

MUTOH

MUTOH VJ-1304 Bedienungsanleitung

MUTOH

MUTOH RJ-900C series Bedienungsanleitung

MUTOH

MUTOH VJ-1638UH Mark II Bedienungsanleitung

MUTOH

MUTOH ValueJet VJ-1204 Bedienungsanleitung

MUTOH

MUTOH RJ600EX-B-01 Bedienungsanleitung

MUTOH

MUTOH ValueJet VJ-1604 Bedienungsanleitung

MUTOH

MUTOH Osprey 75 Bedienungsanleitung

MUTOH

MUTOH ValueJet VJ-1604 Bedienungsanleitung

MUTOH

MUTOH vj-1617h Bedienungsanleitung

MUTOH

MUTOH Falcon RJ-8000 Bedienungsanleitung

MUTOH

MUTOH ViperTX Extreme Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Brother

Brother 1440 - HL B/W Laser Printer Kurzanleitung

Fuji Xerox

Fuji Xerox DocuPrint P375 dw Bedienungsanleitung

WOOSIM

WOOSIM PORTI-S30 Bedienungsanleitung

Olivetti

Olivetti PG L2140 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 224e Bedienungsanleitung

Canon

Canon LBP113w Bedienungsanleitung

Xerox

Xerox DocuColor 5000 Bedienungsanleitung

Canon

Canon PRO-500 Series Einrichtungshandbuch

Epson

Epson ET-7750 Betriebsanleitung