MuxLab 500554-WH Bedienungsanleitung

Bluetooth Audio to Dante Interface, White

User Manual

500554-WH

Bluetooth Audio to Dante Interface, White

Table of Contents

1. Safety Precautions....................................................................................................................................................3

2. Introduction................................................................................................................................................................4

3. Features.......................................................................................................................................................................4

4. Package Contents...................................................................................................................................................4

5. Specifications............................................................................................................................................................5

6. Product Overview....................................................................................................................................................5

7. Operation....................................................................................................................................................................6

7.1. Power On.............................................................................................................................................................6

7.2. Pairing and Connect......................................................................................................................................6

7.3. Routing Configuration....................................................................................................................................6

7.4. Bluetooth Name Modification....................................................................................................................7

8. Application Diagram...............................................................................................................................................8

Follow basic safety precautions to reduce the risk of fire, electrical shock, and injury.

Do not dismantle the housing or modify the module. It may result in electrical shock or

burns.

Do not open or remove the housing of the device as you may be exposed to dangerous

voltage or other hazards.

To prevent fire or shock hazard, do not expose the unit to rain, moisture and do not install

this product near water. Keep the product away from liquids.

Spillage into the housing may result in fire, electrical shock, or equipment damage. If an

object or liquid falls or spills on the housing, unplug the module immediately.

Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the

device before cleaning.

Using supplies or parts not meeting the product specifications may cause damage,

deterioration or malfunction.

Refer all servicing to qualified service personnel.

Install the device in a place with adequate ventilation to avoid damage caused by

overheat.

Unplug the power when left unused for a long period of time.

Information on disposal of devices: do not burn or mix with general household waste,

please treat them as normal electrical waste.

1. Safety Precautions

To ensure the best performance from the product, please read all instructions carefully before

using the device. Save this manual for future reference.

All contents in this manual are copyrighted, and cannot be cloned, copied, or translated

without the express permission of MuxLab Inc. Product specifications and information in this

document are for reference only, and the content may be updated from time to time without

prior notice.

Bluetooth Audio to Dante Interface, White

Simple and intuitive Bluetooth pairing

Bluetooth 5.0 for longer range and more stable connections

Compatible with most Apple smartphones, iPads and Android tablets

Power supply and audio transmission integrated in one cable

Designed to be compatible with standard single gang US wall boxes with Decora

faceplates.

Shows the connection status through LED indicator light.

Supports PoE (IEEE802.3af)

3. Features

2. Introduction

The Bluetooth Audio to Dante Interface, White (Model 500554-WH) is a two-way audio

transmission panel for Bluetooth and Dante. It connects to mobile phones, iPad, and other

devices through Bluetooth interface, and converts the received audio signal into digital signal

transmission through Dante network. Power, control, and audio data are transmitted by only

one network cable, and there is no need to worry about ground loops or other audio issues.

The Bluetooth Audio to Dante Interface is designed to be compatible with standard single

gang US wall boxes with Decora faceplates.

One (1) Bluetooth Audio to Dante Interface, White

One (1) User manual (available via download)

4. Package Contents

Notes

：

Confirm that the product and accessories are all included. If not, please contact the

supplier from which you purchased the unit.

Bluetooth Audio to Dante Interface, White

Bluetooth interface

Dante interface

Frequency response

Floor noise

THD

Operating temperature

Sampling rate

Operating humidity

Dimensions (LxWxH)

Power consumption

2Blue Indicator

5. Specifications

Bluetooth 5.0, Stereo I/O

Typical range is 15 - 23 m (50 - 75 ft) max

RJ45 interface, stereo input/output

20Hz-20kHz

48kHz 24bit

<0.005%

Specification

0℃ ~ +40℃

-90dB

5~95%

123.5mm × 79mm × 35mm

156g

Form Factor 1 Gang US

Warranty

Order Information

2 years

500554-WH Bluetooth Audio to Dante Interface, White (UPC: 627699015544)

Bluetooth range

Net Weight

6. Product Overview

Press the button to enable Bluetooth pairing mode.

Connect to PoE switch

Name Function Description

Indicates that the Bluetooth connection is successful

Red Indicator

Bluetooth pairing button

RJ45 Network Interface

Indicates Bluetooth disconnected

Bluetooth Audio to Dante Interface, White

7. Operation

①

Connect the equipment correctly.

②

Long press the PAIR button on the panel for about 3S, the red and blue LED indicator lights

start to flash alternately, it means that it is visible to other devices and can receive pairing

③

Use Dante Controller software to control DANTE audio routing

7.1 Power On

After starting the Bluetooth Audio to Dante Interface, the red and blue LED indicator on the

panel will flash alternately for a short time, after successfully power on, it will turn into red light

flash.

If the LED indicator light is not on or always on, the equipment will fail. It is recommended to

power off and restart the equipment again.

7.2 Pairing and Connect

To enable the pairing mode, the user only needs to press and hold the PAIR button on the

panel for about 3S.

The LED red and blue indicators on the panel will start to flash alternately, indicating that the

Bluetooth Audio to Dante Interface is now visible to other Bluetooth devices and accepts

pairing. Then you can turn on other Bluetooth devices to search the Bluetooth Audio to Dante

Interface and pair them. When only the blue LED indicator flashes on the panel, it means the

pairing is successful.

Note: The device saves the last 10 paired devices in a list, any device present in this list will be

able to reconnect without requesting pairing again. The user only needs to select the name

corresponding to the Bluetooth Audio to Dante Interface on the smart device.

7.3 Routing Configuration

After the above steps are completed, users only need to open the Dante Controller control

software on their PC and configure the audio route to complete the system construction.

Download and install the Dante Controller from Audinate website (www.audinate.com).

Bluetooth Audio to Dante Interface, White

In order to change the Bluetooth name of the device, download the MuxLab Bluetooth tool

from the Muxlab website.

Bluetooth name: Customer customized Bluetooth name

Search: Display the IP address, Dante name, Bluetooth name of online devices

Name synchronization: Bluetooth name is consistent with Dante name

7.4 Bluetooth Name Modification

Steps:

1. Click search, the online device will be displayed in the list box, click to select the device

2. Modify the Bluetooth name and click save

3. The Bluetooth name can be modified using Dante Controller software to modify the Dante

chip name and the Bluetooth name can be modified simultaneously.

Bluetooth Audio to Dante Interface, White

500554-WH

2321 Cohen | St-Laurent , H4R 2N7 | Québec, Canada Tel: 514-905-0588 | Fax:

514-905-0589 | Toll free: 1-877-689-5228 [email protected] |

[email protected] | www.muxlab.com

8. Application Diagram

Bluetooth Audio to Dante Interface, White

Inhaltsverzeichnis

Andere MuxLab Medienkonverter Handbücher

MuxLab

MuxLab DisplayPort 1.2a 1x2 Splitter SST Bedienungsanleitung

MuxLab

MuxLab 500551 Bedienungsanleitung

MuxLab

MuxLab 500436 Bedienungsanleitung

MuxLab

MuxLab 500080 Bedienungsanleitung

MuxLab

MuxLab 500717 Bedienungsanleitung

MuxLab

MuxLab 500088 Bedienungsanleitung

MuxLab

MuxLab 500438 Bedienungsanleitung

MuxLab

MuxLab 500081 Bedienungsanleitung

MuxLab

MuxLab UHD-4K Bedienungsanleitung

MuxLab

MuxLab 500021 Service-Handbuch

MuxLab

MuxLab 500767 Series Bedienungsanleitung

MuxLab

MuxLab 500701 Bedienungsanleitung

MuxLab

MuxLab 500087 Bedienungsanleitung

MuxLab

MuxLab 500028-WP-US Bedienungsanleitung

MuxLab

MuxLab 500044 Bedienungsanleitung

MuxLab

MuxLab 500728 Bedienungsanleitung

MuxLab

MuxLab 500431 Bedienungsanleitung

MuxLab

MuxLab 500149 Bedienungsanleitung

MuxLab

MuxLab 500001 Bedienungsanleitung

MuxLab

MuxLab 500550 Bedienungsanleitung

MuxLab

MuxLab 500717 Bedienungsanleitung

MuxLab

MuxLab 500774 Bedienungsanleitung

MuxLab

MuxLab 500774 Bedienungsanleitung

MuxLab

MuxLab 500438 Bedienungsanleitung

Beliebte Medienkonverter Handbücher anderer Marken

SoundTraxx

SoundTraxx Blunami BLU-2200 Bedienungsanleitung

SPROLINK

SPROLINK VA1 Bedienungsanleitung

Acclaim Lighting

Acclaim Lighting DDC-1-AC Bedienungsanleitung

Nikon

Nikon AF-S TC-20E III Bedienungsanleitung

Axis

Axis AXIS Q7406 Bedienungsanleitung

Omega

Omega TAC80B-J Bedienungsanleitung

Zoom

Zoom Thunderbolt TAC-2R Bedienungsanleitung

OST

OST iConverter 10/100M Bedienungsanleitung

Vertiv

Vertiv Netsure Bedienungsanleitung

birddog

birddog MINI Bedienungsanleitung

Roland

Roland GI-10 Bedienungsanleitung

Wallenstein

Wallenstein WX310 Bedienungsanleitung

Pace

Pace MSS 200-1 Bedienungsanleitung

Solar Converters

Solar Converters EQ 12/24-50 Bedienungsanleitung

CYP

CYP EL-7400V Bedienungsanleitung

TIE

TIE MIDI 1i1o Bedienungsanleitung

DCS

DCS Vivaldi Upsampler Bedienungsanleitung

Westermo

Westermo MCW-211 SERIES Bedienungsanleitung