MuxLab PRODIGITAL 500791 Bedienungsanleitung

HDMI/IP PTZ Camera

Operation Manual

(500791)

HDMI/IP PTZ Camera Operation Manual

Preface

Thank you for purchasing the HDMI/IP PTZ Camera. This manual covers the camera functions,

installation and operation. Prior to installation and usage, please read the manual thoroughly.

Precautions

This product must be used in the specified conditions in order to avoid damage to the camera:

⚫Do not subject the camera to rain or moisture.

⚫Do not remove the cover, otherwise you may get an electric shock and may void the

warranty. In case of abnormal operation, contact the seller.

⚫Never operate beyond the specified temperature, humidity and power supply range.

⚫Please use a soft dry cloth to clean the camera. If the camera is very dirty, clean it with a

diluted neuter detergent; do not use any type of solvents which may damage the surface.

Note

This is class A product. Electromagnetic radiation at the specific frequency may affect the image quality

of a TV in a home environment

All contents in this manual is copyrighted, and cannot be cloned, copied or translated without the express

permission of MuxLab Inc. Product specifications and information in this document are for reference

only, and the content may be updated from time to time without prior notice.

HDMI/IP PTZ Camera Operation Manual 
3
Contents 
Safety Notice......................................................................................4
Supplied Accessories..........................................................................4
Quick Start .........................................................................................5
Features..............................................................................................6
Specification ......................................................................................7
Main Unit Connections ......................................................................9
IR Handheld Remote Control...........................................................10 
RS-232 Interface Pinout...................................................................13 
Serial Communication Control ........................................................14 
PTZ over TCP/UDP Control ............................................................ 14 
Command List..................................................................................14 
Menu Settings ..................................................................................15 
Network Function ............................................................................20 
Maintenance and Troubleshooting ...................................................29 
Appendix – Visca and Pelco-D Comment List ................................31 
 
 

HDMI/IP PTZ Camera Operation Manual

Safety Notice

⚫Electric Safety

Installation and operation must be in accordance with national and local electric safety standards.

Do not use any power supply other than the one originally supplied with this camera.

⚫Caution when transporting

Avoid stress, vibration and sock during transport, storage and installation.

⚫Polarity of power supply

The power supply of the product is +12V @ 2A (max). The polarity of the power supply plug is

shown below.

⚫Care during installation

Do not grasp the camera head when carrying the camera. Do not turn camera head by hand. Doing

so may result in mechanical damage.

Do not apply any corrosive form of liquid, gas or solid to the camera to avoid damaging the plastic

cover.

To make sure there are no obstacles in the camera rotation range.

Never power on the camera before the installation is complete.

⚫Do not dismantle the camera in any way

MuxLab is not responsible for damage caused by unauthorized modification or dismantling.

CAUTION!

Specific frequencies of electromagnetic fields may affect the image quality of the camera!

Supplied Accessories

When unpacking, check that all supplied accessories are included:

•One (1) Camera

•One (1) AC power adaptor

•One (1) Power cord

•One (1) RS232 cable

•One (1) IR handheld remote control

•One (1) User manual (available via download)

HDMI/IP PTZ Camera Operation Manual

Quick Start

Step1. Please check that connections are correct before continuing.

Step2.Connect the power on the rear panel of the camera, and the power LED on the front will illuminate.

Step3. During the power On sequence the Pan-Tilt function rotates the camera to its maximum upper

right position, and then returns to the center position to complete the initialization process. (Note: if

there is an entry for position preset 0, the corresponding position preset 0 will be called up after

initialization.)

HDMI/IP PTZ Camera Operation Manual

Features

⚫Maximum resolution of 1920 x 1080 (Full HD) at 60Hz.

⚫Supports a Panasonic's 1/2.7 inch, 2.07 million effective pixels high quality HD CMOS sensor.

⚫Uses a 72.5° wide-angle high-quality lens.

⚫Supports a 12x optical zoom, and up to 16x digital zoom.

⚫High SNR CMOS sensor combined with 2D & 3D noise reduction algorithm, effectively reducing

noise even under low light conditions.

⚫Supports AAC audio encoding for better sound quality at a lower bandwidth.

⚫Designed with worm gear drive for reliable and accurate movement.

⚫May be remotely controlled via RS232 and IP.

⚫Works as a standalone device and is compatible with MuxLab’s Live Streaming Kits (models

500785 & 500786).

HDMI/IP PTZ Camera Operation Manual

Specification

Camera

Sensor

1/2.7 inch, CMOS, Effective Pixels: 2.07M

Scanning Mode

Progressive

Lens

12x, focal length of 3.5mm to 42.3mm, F-Stop of 1.8 to F2.8

Digital Zoom

16x

Minimal Illumination

0.5 Lux @ (F1.8, AGC ON)

Shutter

1/30s to 1/10000s

White Balance

Auto, Indoor, Outdoor, One Push, Manual

Backlight Compensation

Supported

Digital Noise Reduction

2D & 3D Digital Noise Reduction

Video S/N

≥55dB

Horizontal Angle of View

72.5° to 6.9°

Vertical Angle of View

44.8° to 3.9°

Horizontal Rotation Range

-170° to +170°

Vertical Rotation Range

-30° to +90°

Pan Speed Range

1.7° to 100°/s

Tilt Speed Range

0.7° to 28°/s

Horizontal & Vertical flip

Supported

Image Freezing

Supported

Number of Presets

255

Preset Accuracy

0.1°

IPC Features

Video coding standard

H.265/H.264/MJEPG

Video Stream

First Stream, Second Stream

First Stream resolution

1920x1080,1280x720,1024x576,960x540,640x480,640x360

Second Stream resolution

1280x720,1024x576,720x576,720x408,640x360,480x270,320x240,3

20x180

Video Bit Rate

32Kbps to 20480Kbps

Bit Rate Types

Variable bit rate and Fixed bit rate

HDMI/IP PTZ Camera Operation Manual

Frame Rate

1fps to 60fps

Audio encode standard

AAC

Audio Bit Rate

96Kbps, 128Kbps, 256Kbps

Support protocols

TCP/IP, HTTP, RTSP, RTMP, ONVIF, DHCP, Multicast, etc.

Input/Output Interface

HD Output

One (1) HDMI 1.3

Network interface

One (1) RJ45: 10/100/1000M Adaptive Ethernet ports

Audio interface

1-ch 3.5mm audio interface, Line In

Communication interface

One (1) RS-232: 8pin Min DIN, Max Distance: 30m,

Protocol: VISCA/Pelco-D/Pelco-P

Power jack

JEITA type (DC IN 12V)

Generic Specification

Input Voltage

DC 12V

Current Consumption

1.0A (Max)

Operating Temperature

-10°C ~ 40°C (14°F ~ 104°F)

Storage Temperature

-40°C ~ 60°C (-40°F ~ 140°F)

Power Consumption

12W (Max)

MTBF

>30000h

Unit dimensions

6.65” x 5.59” x 6.46” (169mm x 142mm x 164mm)

Unit Weight

3.0lbs (1.35Kg)

Model

Ordering Information

500791 HDMI/IP PTZ Camera

HDMI/IP PTZ Camera Operation Manual

Main Unit Connections

1 RJ45S Ethernet interface (for video streaming and device control)

2 HDMI Out interface

3 2CH AUDIO LINE IN interface

4 RS232 interface for control

5 12VDC IN power interface

HDMI/IP PTZ Camera Operation Manual

IR Handheld Remote Control

1. Standby Button

Pressing this button toggles between “standby”

and “normal power On” mode. (standby mode

is approximately half the power consumption

of power On mode)

2. Numeric Position Buttons

To store or activate a preset position

3. * Button

Used in combination with other buttons

4. Preset Button

[PRESET] + Numeric key (0-9): Saves a

preset position to a numeric key

5. Pan-Tilt Home Button

Pressing this button sets the camera to the

Pan/Tilt center (home) position

6. Back/Return button

Press this button returns you to the previous

(higher) OSD (On Screen Display) menu.

7. Zoom Buttons

Slow Zoom: Zoom In [+] or Out [-] slowly

Fast Zoom: Zoom In [+] or Out [-] quickly

8. Pan-Tilt L/R set

Press the L/R Set button and either the “1” key or “2” key to set the camera direction of the Pan-Tilt

motion.

L/R Set +1 [STD]: sets the Pan-Tilt motion to the default left/right direction

L/R Set +2 [REV]: sets the Pan-Tilt motion to the reverse right/left direction

9. Focus Buttons

Used for focus adjustment.

Press [AUTO] to adjust the focuses on the center object automatically.

Press [MANUAL] to adjust the focus on the center of the object manually by using the

Inhaltsverzeichnis

Andere MuxLab Sicherheitskamera Handbücher

MuxLab

MuxLab ProDigital 500790 Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung

Lumens

Lumens VC-A50PNW Bedienungsanleitung