Nady Audio ProPower PPA-300 Bedienungsanleitung

PPA-300

ProPower™ Stereo Power Amplifier

O W N E R ’ S M A N U A L

PPA-300

ProPower™ Stereo Power Amplifier

Congratulations on your choice of the NADY AUDIO ProPower™ PPA-300 stereo power amplifier — you have purchased one

of the finest stereo amplifiers on the market today. This unit was developed using the expertise of professional sound engineers

and working musicians. You will find that your new PPA-300 amplifier has superior performance and greater flexibility than any

other amplifiers in its price range. Please read this manual carefully to get the most out of your new unit. Thanks for selecting

NADY AUDIO as your choice in stereo power amplifiers.

Date of Purchase

Dealer’s Name

City

State

Zip

Model #

Serial #

C O N T E N T S

F E AT U R E S

FEATURES ................................................................................2

WARNING ..................................................................................3

FRONT & REAR PANEL CONNECTIONS ................................4

INSTALLATION ..........................................................................5

CONNECTIONS ........................................................................6

SPECIFICATIONS ......................................................................7

Offering top power, superior performance and full professional operating features in a roadworthy compact chassis, the PPA-300

amplifier is perfect for even the most demanding sound reinforcement installation and touring applications.

• Full operating features: stereo (dual channel), volume controls; XLR and 1/4” TS inputs

• Full safety/reliability features: fan for cooling; soft-start turn on, noise-free on-off; built-in DC offset; independent DC and thermal overload

protection on each channel; short circuit and speaker protection

• Power ON LED; Signal and Clipping LED indicators for each channel

• Roadworthy, rugged double rack space (2U) housing

• IEC power cord connector with built-in fuse

• PPA-300 - 2 x 150W RMS @ 4 Ohms, 2 x 120W RMS @ 8 Ohms

WA R N I N G

IMPORTANT SAFETY INSTRUCTIONS

When using this electronic device, basic precautions should always be taken, including the following:

1. Read all instructions before using the product.

2. Do not use this product near water (e.g., near a bathtub, washbowl, kitchen sink, in a wet basement, or near a

swimming pool, etc.).

3. This product should be used only with a cart or stand that will keep it level and stable and prevent wobbling.

4. This product, in combination with headphones or speakers, may be capable of producing sound levels that

could cause permanent hearing loss. Do not operate for a long period of time at a high volume level or at a

level that is uncomfortable. If you experience any hearing loss or ringing in the ears, you should consult an

audiologist.

5. The product should be positioned so that proper ventilation is maintained.

6. The product should be located away from heat sources such as radiators, heat vents, or other devices

(including amplifiers) that produce heat.

7. The product should be connected to a power supply only of the type described in the operating instructions or

as marked on the product. Replace the fuse only with one of the specified type, size, and correct rating.

8. The power supply cord should: (1) be undamaged, (2) never share an outlet or extension cord with other

devices so that the outlet’s or extension cord’s power rating is exceeded, and (3) never be left plugged into

the outlet when not being used for a long period of time.

9. Care should be taken so that objects do not fall into, and liquids are not spilled through, the enclosure’s

openings.

10. The product should be serviced by qualified service personnel if:

A. The power supply cord or the plug has been damaged.

B. Objects have fallen into, or liquid has been spilled onto the product.

C. The product has been exposed to rain.

D. The product does not appear to operate normally or exhibits a marked change in performance.

E. The product has been dropped, or the enclosure damaged.

11. Do not attempt to service the product beyond what is described in the user maintenance instructions. All

other servicing should be referred to qualified service personnel.

F R O N T & R E A R C O N T R O L S A N D C O N N E C T I O N S

FRONT PANEL

1. POWER SWITCH

To turn the unit ON or OFF, press the left or right portion

of this button. Before turning on the amplifier, check all

connections and turn down the level controls. A

momentary muting is normal when turning the amplifier

on or off. (Caution: Always turn on your power amplifier

last, after all your other connected equipment, and

always turn off your power amplifier before your other

connected equipment.)

2. POWER LED INDICATOR

This LED flashes and then illuminates when the power is

turned “ON”.

3. CLIP (PEAK) LED INDICATORS

These LEDs illuminate if any section of the power

amplifier’s output are within 3dB of clipping. Occasional

blinking of the LEDs are acceptable, but if they remain on

more than occasionally you should turn down either the

power amplifier’s level controls or reduce the output level

of the preceding component to avoid audible distortion or

hard clipping. (Note: Operating the amplifier at hard

clipping can result in overheating or may damage your

amplifier over a period of time. Amplifiers that are

damaged due to such user neglect, or improper

operation, are not covered under warranty.)

4. SIGNAL LED INDICATORS

These LEDs illuminate to confirm the presence of an

input signal greater than 100 mV at that channel of the

amplifier

5. LEVEL CONTROLS

These control the level of signal coming into each

channel. The actual voltage gain of the amplifier is

shown in dB. Turn these controls counterclockwise if the

peak LEDs illuminate steadily (indicating too strong an

input signal).

(1)

(5) (2) (5)(3)

(4)

(3)

REAR PANEL

6. POWER CONNECTOR

The cord connector is used to connect the AC power

source to your power amplifier. (CAUTION: DO NOT

REMOVE THE CENTER GROUNDING PIN.)

7. FUSE

If this fuse blows continuously, shut off the unit and have

it serviced by qualified service technician. 115V AC ~5A

250V FB

8. L/R CHANNEL OUTPUT CONNECTORS

1/4” (6.3 mm) speaker output jacks. Connect these to

speakers with a total impedance of no less than 4 ohms

per side.

9. BALANCED INPUT CONNECTORS (1/4" TS & XLR)

1/4" (6.3mm) TS (Tip/Sleeve) phone jacks and XLR

jacks.

(6) (7)

(8)

(9)

To ensure years of enjoyment from your NADY AUDIO ProPower™ PPA-300, please read and understand this manual

thoroughly before using the unit.

INSPECTION

Your NADY AUDIO ProPower™ PPA-300 was carefully packed at the factory in packaging designed to protect the units in

shipment. Before installing and using your unit, carefully examine the packaging and all contents for any signs of physical

damage that may have occurred in transit.

[Please note: Nady Systems is not responsible for shipping damage. If your unit is damaged, do not return to Nady, but notify

your dealer and the shipping company (if shipped to you) immediately to make a claim. Such claims must be made by the

consignee in a timely manner.]

CONTENTS

• Instruction manual

• PPA-300 (verify that the unit’s serial number is same as shown on shipping carton)

• AC Power cord

• Warranty Card

POWER CONNECTION

The PPA-300 has an internal power supply and is designed to operate from an external AC source. Power requirements

for electrical equipment differ from area to area. Be sure to confirm that the voltage is your area is 115V, 60 Hz

RACK MOUNTING

The PPA-300 amplifier is designed for standard 19" rack mounting as well as “stack” mounting without a cabinet. Use 4

screws and washers for mounting to the front rack rails. It is also a good idea to support the amps also in the rear,

especially for mobile use where the amps will be subjected to shocks.

AMPLIFIER COOLING

Also pay close attention to the cooling requirements. Never block the air vent in the back side and front of the amplifier if

the amplifier is being run at high output levels. For best results in such high output power applications you should

augment the amplifier’s air flow with a rack cooling system.

I N S TA L L AT I O N

C O N N E C T I O N S

Total impedance

no less than 4

Total impedance

no less than 4

S P E C I F I C AT I O N S

The specifications above are correct at the time of printing of this manual. For improvement purposes, all specifications for this unit, including design

and appearance, are subject to change without prior notice.

POWER SPECIFICATIONS

OUTPUT POWER (EIA 1KHz 1% THD) ..........................................................................120W RMS @ 8 ohms per side

150W RMS @ 4 ohms per side

ELECTRICAL SPECIFICATIONS

INPUT SENSITIVITY ...........................................................................................................................500V RMS (-4dBu)

INPUT IMPEDANCE ..........................................................................................................50K Unbalanced & Balanced

FREQUENCY RESPONSE (at 10dB below rated output power) ........................................................20Hz~20KHz ±1dB

5Hz~50KHz ±3dB

DISTORTION ..............................................................................................................................................................<.1%

S/N RATIO ................................................................................................................................................................100dB

GENERAL SPECIFICATIONS

PROTECTIONS ......................................................................Full short circuit, open circuit, thermal, ultrasonic, and RF

protection; stable into reactive or mismatched loads; ON/OFF muting; current limiter

FRONT CONTROLS ............................................................................Power switch, input level control for each channel

REAR PANEL CONTROLS ......................................................................................................AC voltage selector switch

CONNECTORS ......................................................................................................................Power; IEC power cord jack

Input: Active balanced XLR and 1/4” (6.3mm) TRS

Output: dual 1/4” speaker jacks

POWER SUPPLY ..................................................................................................................................110V~120V 60 HZ

FUSE ............................................................................................................................................115V AC ~ 5A 250V FB

DIMENSIONS ..........................................................................................................19” x 9.6” x 3.5” (483 x 244 x 89 mm)

WEIGHT ....................................................................................................................................................16.6 lbs. (7.5Kg)

NADY SYSTEMS, INC. • 6701 SHELLMOUND STREET, EMERYVILLE, CA 94608

Tel: 510.652.2411 • Fax: 510.652.5075 • nady.com

SERVICE FOR YOUR NADY AUDIO PRODUCT

(U.S.) Should your NADY AUDIO product require service, please contact the Nady Service Department via

telephone at (510) 652-2411, or e-mail at service@nady.com.

(International) For service, please contact the NADY AUDIO distributor in your country through the dealer from

whom you purchased this product.

DO NOT ATTEMPT TO SERVICE THIS UNIT

YOURSELF AS IT CAN BE DANGEROUS

AND WILL ALSO VOID THE WARRANTY.

Inhaltsverzeichnis

Andere Nady Audio Verstärker Handbücher

Nady Audio

Nady Audio XA Bedienungsanleitung

Nady Audio

Nady Audio GAC-412 Gebrauchsanweisung

Nady Audio

Nady Audio HA-1X4 Bedienungsanleitung

Nady Audio

Nady Audio HAM-4 Bedienungsanleitung

Nady Audio

Nady Audio XA-300 Bedienungsanleitung

Nady Audio

Nady Audio 3WA-1700 Bedienungsanleitung

Nady Audio

Nady Audio SRA 2150 Bedienungsanleitung

Nady Audio

Nady Audio SPA 850 Bedienungsanleitung

Nady Audio

Nady Audio 3WA-1700 Bedienungsanleitung

Nady Audio

Nady Audio HPA-8 Bedienungsanleitung

Nady Audio

Nady Audio HPA-4 Bedienungsanleitung

Nady Audio

Nady Audio XA-1100 Bedienungsanleitung

Nady Audio

Nady Audio SMA-2130 Bedienungsanleitung

Nady Audio

Nady Audio TMP-1 MICPREAMP Bedienungsanleitung

Nady Audio

Nady Audio HA-1X4 Bedienungsanleitung

Nady Audio

Nady Audio PRA-8 Bedienungsanleitung

Nady Audio

Nady Audio PPA-300 Bedienungsanleitung

Nady Audio

Nady Audio TMP-3 Bedienungsanleitung

Nady Audio

Nady Audio DMP-2 Bedienungsanleitung

Nady Audio

Nady Audio SPA 1400 Bedienungsanleitung

Nady Audio

Nady Audio PHP-3 Bedienungsanleitung

Nady Audio

Nady Audio TMP-2 Bedienungsanleitung

Beliebte Verstärker Handbücher anderer Marken

ASTRO

ASTRO HVO V40 P Bedienungsanleitung

Marantz

Marantz SUPERSCOPE BLA-545 Montageanleitung

NAD

NAD CI980 Bedienungsanleitung

Technics

Technics SE-CH770 Bedienungsanleitung

Harman Kardon

Harman Kardon HK6300 Bedienungsanleitung

NAD

NAD T975 Bedienungsanleitung

McIntosh

McIntosh MA6850 Bedienungsanleitung

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N Bedienungsanleitung

Viatron

Viatron Autrix Bedienungsanleitung

GME

GME GA9800 Bedienungsanleitung

Atlas

Atlas CP700 Bedienungsanleitung

Roland

Roland KC-1000 Bedienungsanleitung

Pyle

Pyle PFMRA350BW Bedienungsanleitung

Advantage

Advantage S-250 Bedienungsanleitung

IRT Electronics

IRT Electronics DVA-3007 Bedienungsanleitung

Dimavery

Dimavery BA-100 Series Bedienungsanleitung

Sony

Sony XM-S400D Bedienungsanleitung

Schertler

Schertler ROY X Bedienungsanleitung