NAMCO Air Combat Bedienungsanleitung

ij:

CONTENTS

SPECIFICATIONS ._._.....____..............................,......,.,....,...............,,.............................................. 1

2. PRECAUTIONS

2-l Caution When Installing

.........................................................................................................

2-2 Caution When Handling .........................................................................................................

2-3

Caution When Handling Rear Projection Screen ................................................................. .2

3. INSPECTION .................................................................................................................................

4. INSTALLATION

4-l Game Components

...............................................................................................................

4-2 Attaching Cockpit Cabinet to the Monitor Cabinet ................................................................. 4

4-2-l

Attaching Interconnect Box to the Monitor Cabinet .................................................. 4

4-2-2

Attaching Interconnect Box to the Cockpit Cabinet ................................................. 4

4-3 Attaching Monitor Marquee to the Monitor Cabinet ............................................................... 4

5. ADJUSTMENTS

5-l

Power On ...............................................................................................................................

5-2 Adjustment Switches on the Service Panel ...........................................................................

5-3 Test Mode and Play Options

...........................................................................................

...

5-3-i

Setting Game Fees (Coin Options Screen) ......................................................... .7

5-3-2

Changing Game Settings (Game Options Screen) ............................................... .8

5-4 Initializing Controls ................................................................................................................ 9

6. HOW TO PLAY ............................................................................................................................ 10

7. MAINTENANCE

7-l

Removing PCB Tray Assembly ...........................................................................................

1 1

7-2 Removing Game PC Boards

.........................................................................................

7-3 Replacing Fluorescent Lamps ............................................................................................. 12

7-3-l

Replacing Cookpit Fluorescent Lamp ..................................................................... 12

7-3-2 Replacing Marquee Fluorescent Lamps

.........................................................

IX’

7-3-3 Replacing Incandescent Lamps

.........................................................................

TROUBLESHOOTING -GENERAL

.........................................................................................

9. PARTS DRAWINGS ........................................................................................................... 75

10. GAME HARNESS WIRING DIAGRAM

.............................................................................

11.

LIST OF ILLUSTRATIONS (See over)

11. LIST OF ILLUSTRATIONS

4-1

Game Components . . . . . . . . . . ..I........................................................................................

5-1

Service Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5-2

Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

.__..,....

5-3 Joystick

Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5-4

Coin

Options Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

!5-5 Table of Coin Option Settings

.......................................................................................

5-6

Game Option Screen . . . . . . . . . .._.........................................................................................

5-7

Table of Game Option Settings (Game Fee Example) . . . . . . . . . . . . . . .._.................................

5-8

Volume Reset Screen (Initializing Controls)

...................................................................

7-l

Removing Game PCB . . . . . . .._._...........................................................................................

PARTS DRAWINGS

9-l

Base Assembly .................................................................................................................

9-2

Cockpit Assembly .............................................................................................................

9-3

Monitor Cabinet Assembly

Front....................................................................................

Monitor Cabinet Assembly

Rear .....................................................................................

9-5

Seat Assembly ....................................................................................................

...............

9-6

Control Panel (Logic Board) Assembly ..............................................................................

9-7

Throttle Assembly ..............................................................................................................

9-6

Throttle ...............................................................................................................................

9-9 Joystick

..............................................................................................................................

AIR COMBAT”

SPECIFICATIONS

POWER SUPPLY:

POWER CONSUMPTION:

DIMENSIONS:

Assembled Game

INSTALLED GAME WEIGHT:

CRATED DIMENSIONS:

Monitor Cabinet Assy.

Seat Assembly

Marquee Assembly

SHIPPING WEIGHT:

Monitor Cabinet Assy.

Seat Assembly

Marquee Assembly

MONITOR:

ACCESSORIES:

PC XT Type Switching Power Supply

200 Watts

120VAC, 5.0 AMP

Width Depth

Height

42.81” 110.62” 77.12”

1,041 lbs.

Width Depth

Height

44” 33.75” 65.5”

34.38” 68.5” 54”

44” 11.75” 13.5”

559 lbs.

463 Ibs.

69 lbs.

One (1) 46” Rear Projection Color Monitor

with remote control

Keys: (Coin Box) . . . . . . .._....................................... 2

(Coin Door) . ... ... ...._.._............................... 2

(Monitor Cabinet) . . . . . . .._............................ 2

Security Wrench

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Instruction Manual .._........._._._.............................. 1

Note: Specifications may change without prior notice. Modification and/or

alteration of the AIR COMBAT game with kits or parts not supplied by

NAMCO may void the warranty.

2. PRECAUTIONS

2-1 Cautions When Installing

This game is designed for indoor use only. The game must not be installed out-

doors or under the following conditions:

In areas directly exposed to sunlight, high humidity, direct water contact, dust,

high heat or extreme cold.

In locations that would present an obstacle in case of emergency, i.e. near tire

equipment or emergency exits.

On an unstable surface or floor subject to vibration.

2-2 Caution When Handling

AC power must always be turned OFF, and the game unplugged, before

replacing any parts or connecting/disconnecting connectors.

When unplugging the game from an elecnical outlet, always grasp the plug,

not the cord.

Do not subject game to physical shock when transporting or moving it.

d. The power supply range is between 1

lo-120VAC,

(switchable to 220 VAC).

The cabinet must be grounded with a securely connected ground plug.

Care must be taken at all times to avoid electrical shock whenever inspecting

or adjusting the game, particularly around the monitor.

g. Always return the leg levelers to the extreme “up” position before moving the

game, and separate the game into its two assemblies

monitor cabinet and

seat.

h. Adjustment is required whenever the game PC board, ROM, Joystick, Throttle

Control or other potentiometers are changed.

i. DO NOT attempt to repair the Printed Circuit Board (PCB). It contains

sensitive chips that could easily be damaged by even the small internal voltage

of a multi-meter. Always return the PCB to your distributor for any repairs.

2-3 Caution When Handling Rear Projection Screen

The rear projection screen is easily damaged, or deformed, unless proper care is

given to it’s care and cleaning.

The screen should generally be cleaned by wiping gently with a soft cloth.

If extremely dirty, wet a cloth with a mild solution of neutral detergent and

water, wring dry, and wipe gently. Finish with a soft dry cloth.

c. Never:

lUse any chemical cleaners like paint thinner, benzine etc.

lUse any alkaline or acid based detergent.

Apply any volatile matter such as insecticide.

.Leave the screen in contact with rubber or vinyl products for any extended

time.

3. INSPECTION

The AIR COMBAT Game cartons should be carefully inspected upon receipt to

insure that the game is complete and was delivered in good condition.

Inspect the game cabinet by doing the following:

Examine the monitor cabinet exterior and seat assembly for dents, chips, or

broken parts.

Open the side service door and the coin door on the seat assembly as we’

”

the

back cover of the monitor cabinet, and inspect the interior as follows:

Verify that all plug-in connectors are firmly plugged in. DO NOT force

connectors together. The connectors are heyed so they fit only in the proper

orientation. A reversed edge connector can damage a PCB and will void your

warranty.

Inspect the power cord to insure that

there

are no cuts or dents in the insulation.

Inspect the power supply connectors.

Inspect other major sub-assrmblie~. such

the rear

prqjection

monitor, PCB,

leg levers, and speakers.

Make

sure that they are mounted securely and that all

ground wires are firmly connected.

4. INSTALLATION

4-2

Attaching the Cockpit Cabinet to the Monitor Cabinet

4-Z-l

Attaching the Interconnect

to the Monitor Cabinet

Remove the interconnect metal box cover by removing the six (6)

button head screws.

Attach the interconnect box to the monitor cabinet lower front panel

by inserting four (4) l/4-20 bolts through the box holes into the

monitor cabinet, and tighten them.

c. Carefully pull the two (2) six-position and two (2) three-position

molex connectors game harness out through the monitor and

interconnect box holes.

4-2-2 Attaching the Interconnect Box to the Cockpit Cabinet

Roll the monitor cabinet to its intended operating area and place in

position.

Roll the cockpit cabinet close to the interconnect box.

Attach the interconnect box to the cockpit cabinet lower front panel by

inserting four (4) l/4-20 bolts through the box holes into the cockpit

cabinet, and tighten them.

d. Carefully pull the two (2) six-position and two (2) three-position

molex connector game harness out through the cockpit cabinet and

interconnect box holes.

Connect the four (4) molex connectors together. Make sure that the

wire colors match.

Lower the eight (8) leg levelers of the game and adjust all leg levelers

until the game is stable and rests firmly on the floor.

g. Reinstall the interconnect cover.

4-3

Attaching the Monitor Marquee to the Monitor Cabinet

Remove four (4) l/4-20 bolts, two (2) on each end of the bottom of the

marquee box.

Remove four (4) l/4-20 bolts, two on each end of the top of the monitor

cabinet.

Install two (2) metal ‘7” brackets on the marquee box predrilled holes.

Connect three-position molex marquee connector with the monitor

c,!!)inet

connector.

Install and secure the marquee box to the monitor cabinet with the

~-cT’

ining

l/4-20

bolts.

4-4 Setting Game Options

Refer to Section 5 of this manual. The Service Panel and Service

Swrz.:

located inside the Coin Door.

5. ADJUSTMENTS

5-1

Power on

When installation is complete, connect the power cord to an AC outlet and turn

the power on. The

Power

on/off Switch is located on the lower right of the

Monitor Cabinet.

Use

the TV remote control to turn the TV on.

5-2 Adjustment switches on the Service Panel

The Service Panel is located behind the coin door. It has controls for adjustment

of the speaker volume and balance, and switches for accessing the test modes.

.wd---hFRONT

LOUDER

BASS BALANCE VOCUME CONTROL

OFF

Illustration 5-1, SERVICE PANEL

Test Switch

Turning

this switch “ON” enters the Test Mode, and activates the Menu

Screen on the

moniror.

This is where the self-tests are performed, and game

variables (pricing, level of difficulty, potentiometer adjustment etc.) are set/

changed (Ref. 5-3).

Turn the test switch to the “OFF” position at any time to

return to the Game Mode.

2. Audio Volume Control

The

audio volume adjustment controls the volume of all four

(4)

speakers.

3. Audio Bass Balance Control

This volume control is used to balance the volume between the two front

speakers and the two rear speakers.

4. Service Switch

pressing

this switch, credits can be issued without advancing the coin

counter. This switch is also used to change screens in the Test Mode.

5-3 Test Mode

Open the coin door and move the test switch to the “ON”

position.

The

“Menu”

Screen is displayed on the monitor.

COIN OPTIONS

GAME OPTIONS

SWITCH TEST

SOUND TEST

EFFECT TEST

MONITOR TEST PAlTERNS

ADS DATA

PRESS SHOOT 1 SWITCH

Illustration S-2, MENU SCREEN

1. Selecting Menu Item

7 l

l NOTE:

This

ttem

is only show

when “DATA SAMPLlNlf,,’

rhe

GAME OPTION

SCREl3

(Illuslralion

-2)

,is turned

“ON”

Select an item to be changed by moving the lever “FORWARD” and “BACK”

(Ref. Illustration 553) until the desired item is illuminated in red letters.

2. Activating Selected Screen

To activate the selected screen, press the trigger (SHOOT 1) on the lever, and

the selected screen will be displayed.

After all desired changes have been made, you may exit the Test Mode by

turning “OFF” the Test Switch (all changes will be retained), or press the

Service Switch to make the various test screens appear in sequence

EACH

TIME

THE SERVICE SWITCH IS PRESSED.

TRIGGER (SHOOT 1)

MISSILE BUTTON (SHCOT 2)

Illustration 5-3, JOYSTICK CONTROLS

~.iY:

‘-mg

Game Fees (Coin Option Screen)

.-,”

Coin Option Screen is used to change the game fees. Any item

-.s:-

-Jayed

on this screen (Illustration

54)

can be changed per the settings

‘-

on the Table of Coin Option Settings (Illustration 5-5) as follows:

Select the item to change by moving the lever “FORWARD” or

“BACK.

.Change the contents of an item by pressing the trigger (SHOOT 1).

To return to the Test Menu Screen, press the missile button (SHOOT 2).

COIN OPTIONS

FREE PLAY

GAME COST

3 COINS 1 CREDIT

(b)

COIN 1 MECH VALUE

1 COIN COUNT AS iCOIN

-----+d)

COIN 2 MECH VALUE

1 COIN COUNT AS

1 COIN

BO;$JEFOR QUANTlTY BUY-IN

EXil=

PRESS SHOOT 2 SWITCH

Illustration

54.

COIN OPTION SCREEN

.‘. 7lN

COUNTER

1 1

Coin countS as

“X’coin(s) 1-9 Cans foriiinal seniflg

!‘4

7lN COUNTER 2 1

Cotn

M”“t.5 as “x-cm(s) 1-9 Coins

(0rigiMI

Setdng Is

)

-‘NUS

COIN One bonus

coin

is added

imw

when the speclhed number of 2-9

c01ns

QIV~

extra coin

Illustration S-S, TABLE OF COIN OPTION SETTINGS

Inhaltsverzeichnis

Andere NAMCO Arcade-Spielautomat Handbücher

NAMCO

NAMCO LUCKY & WILD Bedienungsanleitung

NAMCO

NAMCO ACE DRIVER DELUXE Leitfaden

NAMCO

NAMCO Quick & Crash Bedienungsanleitung

NAMCO

NAMCO CYBERSLED Bedienungsanleitung

NAMCO

NAMCO CRISIS ZONE DX Bedienungsanleitung

NAMCO

NAMCO Ridge Racer 2 Bedienungsanleitung

NAMCO

NAMCO AquaJet Bedienungsanleitung

NAMCO

NAMCO CYBERSLED Bedienungsanleitung

NAMCO

NAMCO TANK! TANK! TANK! Bedienungsanleitung

NAMCO

NAMCO Mazan Bedienungsanleitung

NAMCO

NAMCO RIDGE RACER V Bedienungsanleitung

NAMCO

NAMCO EXCELEENA Bedienungsanleitung

NAMCO

NAMCO Ninja Assault SD Bedienungsanleitung

NAMCO

NAMCO NINJA ASSAULT Bedienungsanleitung

NAMCO

NAMCO Crow for Cash Bedienungsanleitung

NAMCO

NAMCO FLAMING FINGER Bedienungsanleitung

NAMCO

NAMCO PAC-MAN BATTLE ROYALE Bedienungsanleitung

NAMCO

NAMCO CASINO WINNER Bedienungsanleitung

NAMCO

NAMCO Tekken Tag Tournament Bedienungsanleitung

NAMCO

NAMCO Tekken Tag Tournament Bedienungsanleitung

NAMCO

NAMCO Time Crisis Bedienungsanleitung

NAMCO

NAMCO ACE DRIVER DELUXE Bedienungsanleitung

NAMCO

NAMCO PAC-MAN SWIRL Bedienungsanleitung

NAMCO

NAMCO GODZILLA WARS Jnr. Bedienungsanleitung

Beliebte Arcade-Spielautomat Handbücher anderer Marken

Universal Space

Universal Space COCONUT BASH Bedienungsanleitung

Bay-Tek

Bay-Tek EVOLVE Bedienungsanleitung

Global VR

Global VR America's Army Montage- und Bedienungsanleitung

Atronic

Atronic Cashline Bedienungsanleitung

Universal Space

Universal Space Checky Monkey Bedienungsanleitung

Bay-Tek

Bay-Tek Skee Ball 1908 Alley Bedienungsanleitung

Aristocrat Technologies

Aristocrat Technologies Mars X Upright Bedienungsanleitung

Family Fun Companies

Family Fun Companies Reactor Kurzanleitung

Universal Space

Universal Space FRUIT MANIA Extreme Bedienungsanleitung

falgas

falgas CARRUSEL FIESTA Bedienungsanleitung

Konami

Konami DanceDanceRevolution Bedienungsanleitung

Bay-Tek

Bay-Tek quik drop Bedienungsanleitung

Bandai Namco

Bandai Namco PAC-MAN BATTLE ROYALE CHOMPIONSHIP DELUXE Bedienungsanleitung

Adrenaline

Adrenaline Flying Tickets Montage- und Bedienungsanleitung

Swinks

Swinks Stern Pinball Ghostbusters Bedienungsanleitung

Innovative Concepts in Entertainment

Innovative Concepts in Entertainment MONOPOLY ROLL-N-GO Bedienungsanleitung

jakar

jakar SPEED CARS Bedienungsanleitung

Carmelli

Carmelli HAT TRICK NG1015H Bedienungsanleitung