NAMCO Rave Racer Kurzanleitung

namco

America Inc.

RIDGE RACER

2TM

ONE and TWO-PLAYER

UPGRADE KIT MANUAL

namco

RIDGE RACER

RAVE RACER”

Upgrade Kit Manual

Table of Contents

1 .O

SPECIFICATIONS--------------

---___-________l__l_____l_____l____

1.1

Conversion Game

Specifications-----------------------------------

1.2 Kit Specifications------ --___--_-_-__-______-- 1

1.3 Game Conversion Overview

--- 1

2.0

INTRODUCTION- -- -------------- 1

3.0

lNSTALLATlON--------------

--_--l-_-l___-______----l-l--l--l-----------

3.1 Precautions

~~~~11~~---

---o---------1--------- 1

3.2 Game Installation------- ---------

-__-_---

------- 2

3.3 Cabinet Graphics-------- -----------------I-- 3

3.4 Linked Game Operation-- --em-m-p-11 4

Figure 1: Linked Game Diagrams

------ -4

3.5 Power-Up and Initialization- ------e-

-5

Figure 2: Adjustment (Initialization) Screen

---1-_-_-_--_1--____--1_-I-

Figure 3: Test Mode Screen- -m-I-m

-_____-_

Figure 4: Check Screen---- ---1-_-----_-__------- 7

Figure

Coin Options

Screen--

_-__

-________

--------_____

-__- --

Figure 6: Game Options Screen (I/2)

-----v------I

maImae

sImm

Figure

Game

Options

Screen

(2/z)--

-____

----_-

-_-___-____

--_-

Game

Options

--1-11-----

------_-

_________1___1__1___I_____

_____10

Figure 8: l/O Test Screen----------- -- ----

-1-11

eml__e___aamelmelw

Figure

Switch Test

Screen-----------

_____-_____

Monitor Screens- -- --- -----

-__-

am_amm-me__Im

Figure 10: Sound Test Screen---------- ------- ----

--11-

Figure 11: ADS DATA Screen (112) -------- ----

Figure 12: ADS DATA Screen

(2/2)

-111-------1---15

Figure 13: Others Screen ------

I--___-

_a_-_

-__

Figure

14:

l/O

Board

Test

Screen

_--l___-___--l-__-___-_---I-------

Figure 15: MPWDSP Board Test------ ----- -mw-m-____I_--me----

RIDGE RACER

namco

Upgrade Kit Manual

RAVE

RACERTM

4.0 RAVE RACER GAME FEATURES

_____-_____1____________I_______________------------

4.1 Linked play

_____-____-____

-___

_____

_-__

--___-_-_--__

_-__

____-___

_______18

4.2 Solo play

___-____-___________

-__________-__

------____

--_-----

-__

--_-

--__

4.3 New Features

____-____-___-

-__~__-__~~~~I~~~~~~~~ ____-__----__---_________l____l_

APPENDIX A: PARTS LIST AND ILLUSTRATIONS

namco

RAVE RACER”

1 .O SPECIFICATIONS

1.1

Conversion Game Specifications

Power Supply:

Monitor:

RIDGE RACER

2’”

Upgrade Kit Manual

Switching Power Supply, 200W

1 Standard 25” or 27” color monitor

1.2

Kit Specifications

Part No. RVOI -04432-00

PCB ROM Kits 2 ea. ’

Harness adapters

ea.

Marquee 1 ea.

Decals 1 set

1.3

Game Conversion Overview

The Rave Racer upgrade kit consists of new Rave Racer PCB components, wire harness

adapter cables, new marquee and decals. The kit can be installed in either the original

RR2 two-player cabinet or the RR2 single-player upright cabinet.

Note: Each Rave Racer upgrade kit contains parts to convert TWO driver positions

2.0 INTRODUCTION

This manual provides installation instructions for the Rave Racer upgrade kit. inspect the

kit contents, compare against the parts list in the back of this manual, and notify your

distributor and/or shipping carrier about any missing or damaged parts.

3.0 INSTALLATION

3.1 Precautions

Before replacing any parts, turn the AC power OFF and unplug the game.

The game’s video monitor chassis, when exposed, presents a HIGH

VOLTAGE shock hazard. If it becomes necessary to work in the back of the

game while the power is on, use extreme care to avoid touching the monitor.

RIDGE RACER

2”

namco

Upgrade Kit Manual

RAVE RACER-

3.2

Game Installation

10.

11.

Verify that power has been removed from the game.

Open the rear door to gain access to the

110

PCB (on top of the card cage).

Refer to the wiring diagram for your game in the back of this manual. Locate

the

50-pin

connector,

J402.

Add connections for the VIEW CHANGE switch: Remove the

50-pin

connector at

J402

(on the

I/O

PCB) and insert the Molex-type pins (from new

cable harness

RV50-04365-00)

into A5 and A6 (of the

50-pin

connector), with

the WHITE wire going to A5 and the BUCK wire going to A6. Refer to

drawing

RV50-04400-00.

Reconnect the

50-pin

connector to

J402.

Remove the control panel to add the VIEW CHANGE button.

Drill a 7/8” hole to the left of the steering wheel.

Install the VIEW CHANGE button. Tighten the nut before snapping the lamp

assembly into place.

Connect the quick-disconnect lug from the WHITE wire (of new harness,

RV50-04364-00)

to the gold pin designated NO (pin 4, Normally Open) of the

lamp assembly.

Connect the quick-disconnect lug from the BLACK wire to the silver pin

(designated COM) of the lamp assembly.

While reinstalling the control panel, connect the two-pin plug of the new VIEW

CHANGE harness to the plug on the PCB harness added in Step 4.

nanmom

RIDGE RACER

RAVE RACER”

Upgrade Kit Manual

IO.

Remove the System 22 PCB set from the rear of each unit, using care to

prevent damage to the wiring or connectors.

CAUTION:

USE ANTI-STATIC PROTECTION FOR THE FOLLOWING WORK

]

11.

12.

On each game, remove the

EMI

cover from the PCB rack and set it aside.

Remove the CPU and Video main boards from the card cage and place them

on a flat, anti-static surface.

13.

14.

Observe the 10 devices and 2

PCBs

which are supplied with the kit. Remove

the corresponding devices and (smaller of the two) PCB from the main CPU

board. Remove the (larger of the two) PCB from the Video board.

Install the new devices and PCBs from the kit.

Note: Install device C388 in previously empty socket

12R (Key custom) on the CPU board.

15. Carefully reassemble the card cages, and reinstall them in the game cabinet,

making sure that all connectors are properly seated.

16.

Remove the original marquee plastic panel and replace with the new acrylic

Rave Racer marquee.

13.

Perform game initialization per Section3.5, Power-Up and Initialization.

3.3 Cabinet Graphics

Install the cabinet graphics provided. Float the graphics on by applying a

spray of ammonia cleaner to each surface. Smooth out the bubbles and

liquid with a paint squeegee. Wipe the decal dry with a soft cloth.

RIDGE RACER

2’”

Upgrade Kit Manual

namco

RAVE RACER-

3.4

Linked Game Operation

It is possible to link up to eight RAVE RACER driver positions together.

The linking procedure is the same as that used on Ridge Racer 2:

Turn OFF the main AC power to the game.

2. Remove the link

cables

from the kit or cash box.

3. Using the link cables, connect the cabinets as shown in Figure 1

Note: The switch settings shown apply to the Ridge

Racer 2 two-player cabinet. Ridge Racer 2

single-

player upright cabinet requires the addition of optional

1 P Link PCB p/n VG03-04270-00.

Be careful not to pull on the cables while working around the rear of the

cabinet.

Turn ON the main AC power.

Refer to section TEST MODE, Game Options, for instructions on how to set

up the “CPU Number” and car type/color for each of the linked driver

positions.

Connecting

three

5etf

Q-

Connecting four sets Figure 1

namco

RAVE RACER’”

RIDGE RACER

2”

3.5

Power-Up and Initialization

The following procedure should always be performed at the time of initial power-up, or

when any of these components have been removed or replaced:

l Game

PCBs

. ROMS

Steering system potentiometers

l Pedal assembly potentiometers ‘

System initialization is performed as follows:

Open the coin door to gain access to the Service Panel.

b. Center the steering wheel and remove hands/feet from the controls.

C. While pressing the SERVICE button, toggle the TEST switch ON.

d. The ADJUSTMENT screen will appear as shown in Figure 2.

ADJUSTMENT

HANDLE 000x

GAS 000x

BRAKE 000x

Figure 2: Adjustment (Initialization) Screen

Controls are properly biased when values are as close to ‘0000’ as

possible.

f. Release the SERVICE button and toggle the TEST switch OFF.

RIDGE RACER

2- namco

Upgrade Kit Manual

RAVE RACER-

Turn the TEST switch ON and the TEST MODE screen, as in Figure 3, will

appear.

ITEST MODE

CHECK

COIN OPTIONS

GAME OPTIONS

110

TEST

MONITOR TEST

SOUND TEST

ADS DATA

OTHERS

(1) Status

test screen (see fig. 4)

(2) Sets game cost

(3) Sets game options

(4) Switch test, etc.

(5) Screen test

(6) Adjust speakersvolume

(7) Displays accumulated game data

(8) Board test and EEPROM clear

’

Figure 3: Test Mode Screen

namco

RIDGE RACER

RAVE RACER”

A. Select the CHECK screen option by turning the steering wheel, and call

up the screen by stepping on the accelerator.

CHECK

(DEFAULT IN GREEN)

FEEDBACK STEERING OFF

VIEW SWITCH OFF

STEERING 0000

SHIFT CENTER

SWITCH

OFF

SWITCH 2 OFF

EXIT

Not applicable

Ridge Racer

Status ON/OFF

Status ON/OFF,

UP/DOWN/CENTER

Figure 4: Check Screen

RIDGE RACER 2 Conversion

Note: Steering’status will show full scale reading +FFFF in the CW

direction and

-FFFF

in the CCW direction, and “OK” if steering passes

the displacement test.

Select the desired option using the steering wheel, and use the the

accelerator to change the value of the option.

Use the EXIT option (or press

the accelerator and brake simultaneously) to return to the TEST MODE main

menu.

Dieses Handbuch passt für folgende Modelle

Andere NAMCO Arcade-Spielautomat Handbücher

NAMCO

NAMCO Panic Park DX Bedienungsanleitung

NAMCO

NAMCO Ninja Assault SD Bedienungsanleitung

NAMCO

NAMCO BALL SPECTACULAR Bedienungsanleitung

NAMCO

NAMCO TANK! TANK! TANK! Bedienungsanleitung

NAMCO

NAMCO GUN SURVIVOR 2 Bedienungsanleitung

NAMCO

NAMCO Tekken Tag Tournament Bedienungsanleitung

NAMCO

NAMCO TEKKEN 4 Gebrauchsanweisung

NAMCO

NAMCO Time Crisis Bedienungsanleitung

NAMCO

NAMCO BONGO MONKEY Bedienungsanleitung

NAMCO

NAMCO Point Blank 3 Gebrauchsanweisung

NAMCO

NAMCO Air Combat Bedienungsanleitung

NAMCO

NAMCO EXCELEENA Bedienungsanleitung

NAMCO

NAMCO GODZILLA WARS Jnr. Bedienungsanleitung

NAMCO

NAMCO ACE DRIVER DELUXE Bedienungsanleitung

NAMCO

NAMCO LUCKY & WILD Bedienungsanleitung

NAMCO

NAMCO AquaJet Bedienungsanleitung

NAMCO

NAMCO Ridge Racer V Arcade Battle Bedienungsanleitung

NAMCO

NAMCO Prop cycle Bedienungsanleitung

NAMCO

NAMCO CASINO WINNER Bedienungsanleitung

NAMCO

NAMCO Quick & Crash Bedienungsanleitung

NAMCO

NAMCO RIDGE RACER V Bedienungsanleitung

NAMCO

NAMCO Tekken Tag Tournament Bedienungsanleitung

NAMCO

NAMCO CRISIS ZONE DX Bedienungsanleitung

NAMCO

NAMCO WORLD KICKS Bedienungsanleitung

Beliebte Arcade-Spielautomat Handbücher anderer Marken

Universal Space

Universal Space COCONUT BASH Bedienungsanleitung

Bay-Tek

Bay-Tek EVOLVE Bedienungsanleitung

Global VR

Global VR America's Army Montage- und Bedienungsanleitung

Atronic

Atronic Cashline Bedienungsanleitung

Universal Space

Universal Space Checky Monkey Bedienungsanleitung

Bay-Tek

Bay-Tek Skee Ball 1908 Alley Bedienungsanleitung

Aristocrat Technologies

Aristocrat Technologies Mars X Upright Bedienungsanleitung

Family Fun Companies

Family Fun Companies Reactor Kurzanleitung

Universal Space

Universal Space FRUIT MANIA Extreme Bedienungsanleitung

falgas

falgas CARRUSEL FIESTA Bedienungsanleitung

Konami

Konami DanceDanceRevolution Bedienungsanleitung

Bay-Tek

Bay-Tek quik drop Bedienungsanleitung

Bandai Namco

Bandai Namco PAC-MAN BATTLE ROYALE CHOMPIONSHIP DELUXE Bedienungsanleitung

Adrenaline

Adrenaline Flying Tickets Montage- und Bedienungsanleitung

Swinks

Swinks Stern Pinball Ghostbusters Bedienungsanleitung

Innovative Concepts in Entertainment

Innovative Concepts in Entertainment MONOPOLY ROLL-N-GO Bedienungsanleitung

jakar

jakar SPEED CARS Bedienungsanleitung

Carmelli

Carmelli HAT TRICK NG1015H Bedienungsanleitung