National Instruments NI PXIe-4080 Bedienungsanleitung

Artisan Technology Group is your source for quality

new and certied-used/pre-owned equipment

• FAST SHIPPING AND

DELIVERY

• TENS OF THOUSANDS OF

IN-STOCK ITEMS

• EQUIPMENT DEMOS

• HUNDREDS OF

MANUFACTURERS

SUPPORTED

• LEASING/MONTHLY

RENTALS

• ITAR CERTIFIED

SECURE ASSET SOLUTIONS

SERVICE CENTER REPAIRS

Experienced engineers and technicians on staff

at our full-service, in-house repair center

WE BUY USED EQUIPMENT

Sell your excess, underutilized, and idle used equipment

We also offer credit for buy-backs and trade-ins

www.artisantg.com/WeBuyEquipment

REMOTE INSPECTION

Remotely inspect equipment before purchasing with

our interactive website at www.instraview.com

LOOKING FOR MORE INFORMATION?

Visit us on the web at www.artisantg.com for more

information on price quotations, drivers, technical

specications, manuals, and documentation

View

Instra

GETTING STARTED GUIDE

NI PXIe-4080/4081/4082

1.8 MS/s Digital Multimeter

Note Before you begin, install and configure your chassis and controller.

This document explains how to install, configure, and test the NI 4080/4081/4082. The

NI 4080/4081/4082 is a digital multimeter that ships with NI-DMM, which you use to

program the device.

To access NI 4080/4081/4082 documentation, navigate to Start»All Programs»National

Instruments»NI-DMM Documentation.

Caution The protection provided by this device may be impaired if the device is

used in a manner not specified in this document.

Contents

Electromagnetic Compatibility Guidelines...............................................................................2

Verifying the System Requirements..........................................................................................2

Unpacking the Kit..................................................................................................................... 2

Preparing the Environment....................................................................................................... 3

Safety........................................................................................................................................ 3

Kit Contents.............................................................................................................................. 4

Other Equipment............................................................................................................... 4

Installing the Software.............................................................................................................. 4

Installing the NI 4080/4081/4082............................................................................................. 5

Hardware Front Panel Connectors............................................................................................ 6

Connecting Signals........................................................................................................... 7

Requirements for Cables and Probes...................................................................................... 10

Configuring the NI 4080/4081/4082 in MAX.........................................................................11

Programming the NI 4080/4081/4082.....................................................................................11

NI-DMM Examples........................................................................................................ 13

Troubleshooting...................................................................................................................... 14

What Should I Do if the NI 4080/4081/4082 Doesn't Appear in MAX?........................14

What Should I Do if the Module Fails the Self-Test?.....................................................15

Where to Go Next................................................................................................................... 15

Worldwide Support and Services............................................................................................ 15

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Electromagnetic Compatibility Guidelines

This product was tested and complies with the regulatory requirements and limits for

electromagnetic compatibility (EMC) stated in the product specifications. These requirements

and limits provide reasonable protection against harmful interference when the product is

operated in the intended operational electromagnetic environment.

This product is intended for use in industrial locations. However, harmful interference may

occur in some installations, when the product is connected to a peripheral device or test object,

or if the product is used in residential or commercial areas. To minimize interference with

radio and television reception and prevent unacceptable performance degradation, install and

use this product in strict accordance with the instructions in the product documentation.

Furthermore, any changes or modifications to the product not expressly approved by National

Instruments could void your authority to operate it under your local regulatory rules.

Verifying the System Requirements

To use the NI 4080/4081/4082, your system must meet certain requirements. For more

information about minimum system requirements, recommended system, and supported

application development environments (ADEs), refer to the readme, which is available on the

software media or online at ni.com/updates.

Unpacking the Kit

Caution To prevent electrostatic discharge (ESD) from damaging the device,

ground yourself using a grounding strap or by holding a grounded object, such as

your computer chassis.

1. Touch the antistatic package to a metal part of the computer chassis.

2. Remove the device from the package and inspect the device for loose components or any

other sign of damage.

Caution Never touch the exposed pins of connectors.

Note Do not install a device if it appears damaged in any way.

3. Unpack any other items and documentation from the kit.

Store the device in the antistatic package when the device is not in use.

2| ni.com | NI PXIe-4080/4081/4082 Getting Started Guide

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Preparing the Environment

Ensure that the environment you are using the NI 4080/4081/4082 in meets the following

specifications.

Operating Environment

Ambient temperature range 0 °C to 55 °C (Tested in accordance with

IEC 60068-2-1 and IEC 60068-2-2. Meets

MIL-PRF-28800F Class 3 low temperature

limit and MIL-PRF-28800F Class 2 high

temperature limit.)

Relative humidity range 10% to 90%, noncondensing (Tested in

accordance with IEC 60068-2-56.)

Storage ambient temperature range -40 °C to 70 °C (Tested in accordance

with IEC 60068-2-1 and IEC 60068-2-2.)

Maximum altitude 2,000 m (800 mbar) (at 25 °C ambient

temperature)

Pollution Degree 2

Indoor use only.

Note Refer to the device specifications on ni.com/manuals for complete

specifications.

Safety

Caution Always refer to the specifications document for your device before

connecting signals. Failure to observe the specified maximum signal ratings can

cause shock, a fire hazard, or damage to the devices connected to the

NI 4080/4081/4082. NI is not liable for any damage or injuries resulting from

incorrect signal connections.

NI PXIe-4080/4081/4082 Getting Started Guide | © National Instruments | 3

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Kit Contents

Figure 1. NI 4080/4081/4082 Kit Contents

4 5

PXIe-4080

61/2Digit DMM

1. NI PXIe-4080/4081/4082 Device

2. Test probes

3. Driver Software DVD

4. NI PXIe-4080/4081/4082 Getting Started Guide

(this document)

5. Maintain Forced-Air Cooling Note to Users

Other Equipment

There are several required items not included in your device kit that you need to install or

operate the NI 4080/4081/4082.

• 1/8 in. flathead screwdriver

• A PXI Express chassis with a controller and the chassis documentation

Installing the Software

You must be an Administrator to install NI software on your computer.

1. Install an ADE, such as LabVIEW or LabWindows™/CVI™.

2. Insert the driver software media into your computer. The installer should open

automatically.

If the installation window does not appear, navigate to the drive, double-click it, and

double-click autorun.exe.

3. Follow the instructions in the installation prompts.

Note Windows users may see access and security messages during

installation. Accept the prompts to complete the installation.

4| ni.com | NI PXIe-4080/4081/4082 Getting Started Guide

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

4. When the installer completes, select Restart in the dialog box that prompts you to restart,

shut down, or restart later.

Installing the NI 4080/4081/4082

Caution To prevent damage to the NI 4080/4081/4082 caused by ESD or

contamination, handle the module using the edges or the metal bracket.

1. Ensure the AC power source is connected to the chassis before installing the module.

The AC power cord grounds the chassis and protects it from electrical damage while you

install the module.

2. Power off the chassis.

3. Inspect the slot pins on the chassis backplane for any bends or damage prior to

installation. Do not install a module if the backplane is damaged.

4. Remove the black plastic covers from all the captive screws on the module front panel.

5. Identify a supported slot in the chassis. The following figure shows the symbols that

indicate the slot types.

Figure 2. Chassis Compatibility Symbols

NI PXIe-1062Q

1. PXI Express System Controller Slot

2. PXI Peripheral Slot

3. PXI Express Hybrid Peripheral Slot

4. PXI Express System Timing Slot

5. PXI Express Peripheral Slot

NI 4080/4081/4082 modules can be placed in PXI Express peripheral slots, PXI Express

hybrid peripheral slots, or PXI Express system timing slots.

6. Touch any metal part of the chassis to discharge static electricity.

7. Ensure that the ejector handle is in the downward (unlatched) position.

8. Place the module edges into the module guides at the top and bottom of the chassis. Slide

the module into the slot until it is fully inserted.

NI PXIe-4080/4081/4082 Getting Started Guide | © National Instruments | 5

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Figure 3. Module Installation

NI PXIe-1075

1. Chassis

2. Hardware Module

3. Ejector Handle in Downward (Unlatched) Position

9. Latch the module in place by pulling up on the ejector handle.

10. Secure the module front panel to the chassis using the front-panel mounting screws.

Note Tightening the top and bottom mounting screws increases mechanical

stability and also electrically connects the front panel to the chassis, which can

improve the signal quality and electromagnetic performance.

11. Cover all empty slots using EMC filler panels or fill using slot blockers to maximize

cooling air flow, depending on your application.

12. Power on the chassis.

Hardware Front Panel Connectors

Refer to the following figure for the NI 4080/4081/4082 front panels. The front panels have

four shrouded banana plug connectors.

6| ni.com | NI PXIe-4080/4081/4082 Getting Started Guide

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

PXIe-4080

6½-Digit DMM

PXIe-4081

7½-Digit DMM

PXIe-4082

6½-Digit DMM

300 V

300 V CAT II 300 V CAT II

500 V CAT II

1000 V CAT I

Ω 4 W

V Ω

INPUT

V Ω

INPUT V Ω

INPUT

MAX

500 V

MAX

300 V

MAX

MAX AMPS AMPS AMPS

SENSE

Ω 4 W

MAX

SENSE

Ω 4 W

MAX

SENSE

MAX

300 V

MAX

1k V

MAX

300 V

Connecting Signals

The following figures show how to connect signals to the DMM front panel connectors for

common measurements.

For more information about these common measurements, refer to the NI Digital Multimeters

Help at ni.com/manuals.

Caution Always refer to the device specifications before connecting signals.

Failure to observe the specified maximum signal ratings can cause shock, a fire

NI PXIe-4080/4081/4082 Getting Started Guide | © National Instruments | 7

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

hazard, or damage to the devices connected to the DMM. NI is not liable for any

damage or injuries resulting from incorrect signal connections.

Figure 4. DC and AC Voltage

or AC

Figure 5. DC and AC Current

8| ni.com | NI PXIe-4080/4081/4082 Getting Started Guide

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Figure 6. 2-Wire and 4-Wire Resistance

Note 4-wire resistance measurements use both pairs of terminals. Use the

configuration to measure low resistances accurately by eliminating the effects of

lead resistance.

Figure 7. Capacitance and Inductance

–

NI PXIe-4080/4081/4082 Getting Started Guide | © National Instruments | 9

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Andere Handbücher für NI PXIe-4080

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere National Instruments Steuereinheit Handbücher

National Instruments

National Instruments 7340 Bedienungsanleitung

National Instruments

National Instruments NI 9512 Bedienungsanleitung

National Instruments

National Instruments SCXI-1521 Bedienungsanleitung

National Instruments

National Instruments NI 9436 Bedienungsanleitung

National Instruments

National Instruments NI-9208 Bedienungsanleitung

National Instruments

National Instruments FlexRIO PXI-79 R Series Bedienungsanleitung

National Instruments

National Instruments PXIe-5698 Bedienungsanleitung

National Instruments

National Instruments SCXI-1313 Bedienungsanleitung

National Instruments

National Instruments VXI-8340 Series Bedienungsanleitung

National Instruments

National Instruments SC Express PXIe-4330 Handbuch

National Instruments

National Instruments PXIe-8521 Bedienungsanleitung

National Instruments

National Instruments PXI Terminal Block NI TB-2708 Bedienungsanleitung

National Instruments

National Instruments NI 9263 Handbuch

National Instruments

National Instruments NI 9209 Handbuch

National Instruments

National Instruments FlexRIO PXIe-7975R Bedienungsanleitung

National Instruments

National Instruments PXIe-8821 Bedienungsanleitung

National Instruments

National Instruments NI TB-4340 Bedienungsanleitung

National Instruments

National Instruments FBUS-HSE/H1 LD Bedienungsanleitung

National Instruments

National Instruments 9220 Handbuch

National Instruments

National Instruments NI 9215 Handbuch

National Instruments

National Instruments FieldPoint FP-1601 Bedienungsanleitung

National Instruments

National Instruments NI USB-9264 Bedienungsanleitung

National Instruments

National Instruments MXI Series Bedienungsanleitung

National Instruments

National Instruments Phase Matrix PXI-1440 Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung