National Instruments NI PXIe-4138 Bedienungsanleitung

GETTING STARTED GUIDE

NI PXIe-4138/4139

Single-Channel System SMU

Note Before you begin, install and configure your chassis and controller.

This document explains how to install, configure, and test the NI PXIe-4138/4139

(NI 4138/4139). The NI 4138/4139 is a single channel system source measurement unit

(SMU).

To access NI 4138/4139 documentation, navigate to Start»All Programs»National

Instruments»NI-DCPower»Documentation.

Contents

Electromagnetic Compatibility Guidelines...............................................................................1

Verifying the System Requirements..........................................................................................2

Unpacking the Kit..................................................................................................................... 2

Kit Contents.............................................................................................................................. 3

Other Equipment............................................................................................................... 3

Preparing the Environment....................................................................................................... 4

Safety........................................................................................................................................ 4

Installing the Software.............................................................................................................. 4

Installing the NI 4138/4139...................................................................................................... 5

Configuring the NI 4138/4139 in MAX................................................................................... 6

Programming the NI 4138/4139............................................................................................... 7

Troubleshooting........................................................................................................................ 8

What Should I Do if the NI 4138/4139 Doesn't Appear in MAX?...................................8

Why Is the ACCESS LED Off When the Chassis Is On?.................................................8

Where To Go Next.................................................................................................................... 9

Worldwide Support and Services.............................................................................................. 9

Electromagnetic Compatibility Guidelines

This product was tested and complies with the regulatory requirements and limits for

electromagnetic compatibility (EMC) stated in the product specifications. These requirements

and limits provide reasonable protection against harmful interference when the product is

operated in the intended operational electromagnetic environment.

This product is intended for use in industrial locations. However, harmful interference may

occur in some installations, when the product is connected to a peripheral device or test object,

or if the product is used in residential or commercial areas. To minimize interference with

radio and television reception and prevent unacceptable performance degradation, install and

use this product in strict accordance with the instructions in the product documentation.

Furthermore, any changes or modifications to the product not expressly approved by National

Instruments could void your authority to operate it under your local regulatory rules.

Caution To ensure the specified EMC performance, operate this product only with

shielded cables and accessories.

Caution To ensure the specified EMC performance, the length of all I/O cables

must be no longer than 3 m (10 ft).

Caution To ensure the specified EMC performance, you must install PXI EMC

Filler panels, NI part number 778700-01, in all open chassis slots. A kit of six single

slot EMC Filler Panels can be ordered at ni.com.

Verifying the System Requirements

To use the NI-DCPower instrument driver, your system must meet certain requirements.

Refer to the product readme, which is available on the driver software media or online at

ni.com/manuals, for more information about minimum system requirements,

recommended system, and supported application development environments (ADEs).

Unpacking the Kit

Caution To prevent electrostatic discharge (ESD) from damaging the device,

ground yourself using a grounding strap or by holding a grounded object, such as

your computer chassis.

1. Touch the antistatic package to a metal part of the computer chassis.

2. Remove the device from the package and inspect the device for loose components or any

other sign of damage.

Caution Never touch the exposed pins of connectors.

Note Do not install a device if it appears damaged in any way.

3. Unpack any other items and documentation from the kit.

Store the device in the antistatic package when the device is not in use.

2| ni.com | NI PXIe-4138/4139 Getting Started Guide

Kit Contents

Figure 1. NI 4138/4139 Kit Contents

345

OUTPUTCAT I

ACCESS ACTIVE

NSE

ARD

NSE

SystemSMU

NI PXIe-4138

OUTPUT

±60V , 3 A MAX

150V MAXto

1. NI PXIe-4138/4139 System SMU Device

2. Output Connector Assembly

3. Driver Software DVD

4. NI PXIe-4138/4139 Getting Started Guide (this

document)

5. Maintain Forced-Air Cooling Note to Users

Other Equipment

There are several required items not included in your device kit that you need to operate the

NI 4138/4139. Your application may require additional items not included in your kit to install

or operate your device.

Required Items

• A PXI Express chassis and chassis documentation. For more information about

compatible chassis options, refer to ni.com.

• A PXI Express embedded controller or MXI controller system that meets the system

requirements specified in this guide and chassis documentation.

Note If your device is hardware revision F or earlier, a snap-on ferrite bead is

required to remain in EMC compliance. Refer to the NI 4138/4139 Getting Started

Guide included in your original shipping kit for information about this bead.

To determine which revision of a device you have, open Measurement & Automation Explorer

(MAX) and select the device in question. The hardware revision is displayed in the settings

pane on right-hand side.

NI PXIe-4138/4139 Getting Started Guide | © National Instruments | 3

Optional Items

• NI screwdriver (part number 781015-01).

Preparing the Environment

Ensure that the environment you are using the NI 4138/4139 in meets the following

specifications.

Operating Environment

Ambient temperature range 0 °C to 55 °C (Tested in accordance with

IEC 60068-2-1 and IEC 60068-2-2. Meets

MIL-PRF-28800F Class 3 low temperature

limit and MIL-PRF-28800F Class 2 high

temperature limit.)

Relative humidity range 10% to 90%, noncondensing (Tested in

accordance with IEC 60068-2-56.)

Storage ambient temperature range -40 °C to 70 °C (Tested in accordance

with IEC 60068-2-1 and IEC 60068-2-2.)

Maximum altitude 2,000 m (800 mbar) (at 25 °C ambient

temperature)

Pollution Degree 2

Indoor use only.

Note Refer to the device specifications on ni.com/manuals for complete

specifications.

Safety

Caution Always refer to the specifications document for your device before

connecting signals. Failure to observe the specified maximum signal ratings can

cause shock, a fire hazard, or damage to the devices connected to the NI 4138/4139.

NI is not liable for any damage or injuries resulting from incorrect signal

connections.

Related Information

For information about connecting signals for specific devices, refer to the ranges reference of

the NI DC Power Supplies and SMUs Help.

Installing the Software

You must be an Administrator to install NI software on your computer.

4| ni.com | NI PXIe-4138/4139 Getting Started Guide

1. Install an ADE, such as LabVIEW or LabWindows™/CVI™.

2. Insert the driver software media into your computer. The installer should open

automatically.

If the installation window does not appear, navigate to the drive, double-click it, and

double-click autorun.exe.

3. Follow the instructions in the installation prompts.

Note Windows users may see access and security messages during

installation. Accept the prompts to complete the installation.

4. When the installer completes, select Restart in the dialog box that prompts you to restart,

shut down, or restart later.

Installing the NI 4138/4139

Caution To prevent damage to the device caused by ESD or contamination, handle

the device using the edges or the metal bracket.

1. Ensure the AC power source is connected to the chassis before installing the modules.

The AC power cord grounds the chassis and protects it from electrical damage while you

install the modules.

2. Power off the chassis.

3. Inspect the slot pins on the chassis backplane for any bends or damage prior to

installation. Do not install a module if the backplane is damaged.

4. Remove the black plastic connectors from all the captive screws on the module front

panel.

5. Identify a supported slot in the chassis. The following figure shows the symbols that

indicate the slot types.

Figure 2. Chassis Compatibility Symbols

NI PXIe-1062Q

1. PXI Express System Controller Slot

2. PXI Peripheral Slot

3. PXI Express Hybrid Peripheral Slot

4. PXI Express System Timing Slot

5. PXI Express Peripheral Slot

NI 4138/4139 modules can be placed in PXI Express peripheral slots, PXI Express hybrid

peripheral slots, or PXI Express system timing slots.

6. Touch any metal part of the chassis to discharge static electricity.

7. Ensure that the ejector handle is in the unlatched (downward) position.

8. Place the module edges into the module guides at the top and bottom of the chassis. Slide

the device into the slot until it is fully inserted.

NI PXIe-4138/4139 Getting Started Guide | © National Instruments | 5

Figure 3. Module Installation

NI PXIe-1075

1. Chassis

2. Hardware Module

3. Ejector Handle in Down (Unlatched) Position

9. Latch the module in place by pulling up on the ejector handle.

10. Secure the device front panel to the chassis using the front-panel mounting screws.

Note Tightening the top and bottom mounting screws increases mechanical

stability and also electrically connects the front panel to the chassis, which can

improve the signal quality and electromagnetic performance.

11. Cover all empty slots using filler panels or slot blockers to maximize cooling air flow.

12. Connect the output connector assembly to the device. Tighten any thumbscrews on the

output connector assembly to hold it in place.

13. Power on the chassis.

Configuring the NI 4138/4139 in MAX

Use Measurement & Automation Explorer (MAX) to configure your NI hardware. MAX

informs other programs about which devices reside in the system and how they are configured.

MAX is automatically installed with NI-DCPower.

1. Launch MAX.

2. In the configuration tree, expand Devices and Interfaces to see the list of installed

devices.

Installed devices appear under the name of their associated chassis.

3. Expand your Chassis tree item.

6| ni.com | NI PXIe-4138/4139 Getting Started Guide

MAX lists all devices installed in the chassis. Your default device names may vary.

Note If you do not see your device listed, press <F5> to refresh the list of

installed devices. If the device is still not listed, power off the system, ensure

the device is correctly installed, and restart.

4. Record the device identifier MAX assigns to the hardware. Use this identifier when

programming the NI 4138/4139.

5. Self-test the device by selecting the device in the configuration tree and clicking Self-Test

in the MAX toolbar.

The MAX self-test performs a basic verification of hardware resources.

Programming the NI 4138/4139

You can generate signals interactively using the NI-DCPower Soft Front Panel (SFP) or you

can use the NI-DCPower instrument driver to program your device in the supported ADE of

your choice.

Table 1. NI 4138/4139 Programming Options

Application

Programming

Interface (API)

Location Description

NI-DCPower SFP Available from the start menu

at Start»All Programs»

National Instruments»

NI-DCPower»NI-DCPower

Soft Front Panel.

The NI-DCPower SFP acquires,

controls, and presents data. The NI-

DCPower SFP operates on the PC, to

provide additional display

capabilities.

NI-DCPower

Instrument Driver

LabVIEW—Available on the

LabVIEW Functions palette at

Measurement I/O»

NI-DCPower.

NI-DCPower configures and

operates the device hardware and

performs basic acquisition and

measurement options using

LabVIEW VIs or LabWindows/CVI

functions.

C or LabWindows/CVI—

Available at Program Files»

IVI Foundation»IVI»

Drivers»NI-DCPower.

Microsoft Visual C/C++—NI-

DCPower does not ship with

installed C/C++ examples.

Refer to the Creating an Application

with Microsoft Visual C and C++

topic of the NI DC Power Supplies

and SMUs Help to manually add all

required include and library files to

your project.

NI PXIe-4138/4139 Getting Started Guide | © National Instruments | 7

Troubleshooting

If an issue persists after you complete a troubleshooting procedure, contact NI technical

support or visit ni.com/support.

What Should I Do if the NI 4138/4139 Doesn't Appear

in MAX?

1. In the MAX configuration tree, expand Devices and Interfaces.

2. Expand the Chassis tree to see the list of installed devices, and press <F5> to refresh the

list.

3. If the module is still not listed, power off the system, ensure that all hardware is correctly

installed, and restart the system.

4. Navigate to the Device Manager.

Operating System Description

Windows 8 Right-click the Start screen, and select All apps»Control Panel»

Hardware and Sound»Device Manager.

Windows 7 Select Start»Control Panel»Device Manager.

Windows Vista Select Start»Control Panel»System and Maintenance»Device

Manager.

Windows XP Select Start»Control Panel»System»Hardware»Device

Manager.

5. If you are using a PXI or PXI Express controller, verify that a National Instruments

entry appears in the system device list. Reinstall NI-DCPower and the device if error

conditions appear in the list. If you are using an MXI controller, right-click PCI-to-PCI

Bridge, and select Properties from the shortcut menu to verify that the bridge is enabled.

Why Is the ACCESS LED Off When the Chassis Is

On?

The LEDs may not illuminate until the device has been configured in MAX. Before

proceeding, verify that the NI 4138/4139 appears in MAX.

If the ACCESS LED fails to illuminate after you power on the PXI Express chassis, a problem

may exist with the PXI Express power rails, a hardware module, or the LED.

1. Caution Apply external signals only while the NI 4138/4139 is powered on.

Applying external signals while the device is powered off may cause damage.

Disconnect any signals from the PXI Express module front panels.

2. Remove any front panel connections from the NI 4138/4139.

3. Power off the PXI Express chassis.

4. Remove the module from the PXI Express chassis and inspect it for damage. Do not

reinstall a damaged device.

8| ni.com | NI PXIe-4138/4139 Getting Started Guide

5. Install the module in a different PXI Express chassis slot from which you removed it.

6. Power on the PXI Express chassis.

7. Verify that the device appears in MAX.

8. Reset the device in MAX and perform a self-test.

If the ACCESS LED still fails to illuminate and failures continue, contact NI technical support

or visit ni.com/support.

Where To Go Next

custom applications within

an application programming

interface (API).

NI-DCPower Soft Front Panel

NI-DCPower Instrument Driver

about hardware features

or review device

specifications.

more about your products through ni.com.

NI PXIe 4138 Specifications*

NI PXIe 4139 Specifications*

NI DC Power Supplies

and SMUs Help*

the application

development environment (ADE)

for your application.

*This item is also installed with the driver software.

Located online at ni.com/manuals Located using the NI Example Finder

EXPLORE LEARN CREATE

DISCOVER

Support

ni.com/support

Power Supplies

Solutions

ni.com/powersupplies

Services

ni.com/services

NI Community

ni.com/community

NIPXIe-4138

Getting Started with

LabWindows/CVI

Getting Started with

LabVIEW

NI DCPower Examples*

NI DC Power Supplies

and SMUs Help*

Worldwide Support and Services

The NI website is your complete resource for technical support. At ni.com/support, you have

access to everything from troubleshooting and application development self-help resources to

email and phone assistance from NI Application Engineers.

Visit ni.com/services for NI Factory Installation Services, repairs, extended warranty, and

other services.

NI PXIe-4138/4139 Getting Started Guide | © National Instruments | 9

Visit ni.com/register to register your NI product. Product registration facilitates technical

support and ensures that you receive important information updates from NI.

A Declaration of Conformity (DoC) is our claim of compliance with the Council of the

European Communities using the manufacturer’s declaration of conformity. This system

affords the user protection for electromagnetic compatibility (EMC) and product safety. You

can obtain the DoC for your product by visiting ni.com/certification. If your product supports

calibration, you can obtain the calibration certificate for your product at ni.com/calibration.

NI corporate headquarters is located at 11500 North Mopac Expressway, Austin, Texas,

78759-3504. NI also has offices located around the world. For telephone support in the United

States, create your service request at ni.com/support or dial 1 866 ASK MYNI (275 6964). For

telephone support outside the United States, visit the Worldwide Offices section of ni.com/

niglobal to access the branch office websites, which provide up-to-date contact information,

support phone numbers, email addresses, and current events.

Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on NI trademarks. Other product and

company names mentioned herein are trademarks or trade names of their respective companies. For patents covering NI

products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the

National Instruments Patent Notice at ni.com/patents. You can find information about end-user license agreements (EULAs)

and third-party legal notices in the readme file for your NI product. Refer to the Export Compliance Information at ni.com/

legal/export-compliance for the NI global trade compliance policy and how to obtain relevant HTS codes, ECCNs, and other

import/export data. NI MAKES NO EXPRESS OR IMPLIED WARRANTIES AS TO THE ACCURACY OF THE INFORMATION

CONTAINED HEREIN AND SHALL NOT BE LIABLE FOR ANY ERRORS. U.S. Government Customers: The data contained in

this manual was developed at private expense and is subject to the applicable limited rights and restricted data rights as set forth

in FAR 52.227-14, DFAR 252.227-7014, and DFAR 252.227-7015.

374671B-01 Jan16

Andere Handbücher für NI PXIe-4138

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere National Instruments Steuereinheit Handbücher

National Instruments

National Instruments CompactRIO cRIO-FRC Bedienungsanleitung

National Instruments

National Instruments NI-9477 Bedienungsanleitung

National Instruments

National Instruments LabVIEW Robotics Module Bedienungsanleitung

National Instruments

National Instruments SCXI-1104 Bedienungsanleitung

National Instruments

National Instruments NI R Series Bedienungsanleitung

National Instruments

National Instruments FlexRIO PXI-79 R Series Bedienungsanleitung

National Instruments

National Instruments PXIe-5693 Bedienungsanleitung

National Instruments

National Instruments NI PXI-4220 Bedienungsanleitung

National Instruments

National Instruments Module SCXI-1125 Handbuch

National Instruments

National Instruments PXIe-8830mc Bedienungsanleitung

National Instruments

National Instruments NI 9426 Bedienungsanleitung

National Instruments

National Instruments PXIe-6674T Bedienungsanleitung

National Instruments

National Instruments SCC-DO01 Bedienungsanleitung

National Instruments

National Instruments NI 6520 Bedienungsanleitung

National Instruments

National Instruments NI 9269 Bedienungsanleitung

National Instruments

National Instruments NI 9203 Bedienungsanleitung

National Instruments

National Instruments PXI-6683 Series Bedienungsanleitung

National Instruments

National Instruments ISM-7400 Bedienungsanleitung

National Instruments

National Instruments VXI-AO-48XDC Bedienungsanleitung

National Instruments

National Instruments FP-AI-102 Bedienungsanleitung

National Instruments

National Instruments PXIe-8522 Bedienungsanleitung

National Instruments

National Instruments PXIe-5693 Handbuch

National Instruments

National Instruments SCC-AI Series Bedienungsanleitung

National Instruments

National Instruments FieldPoint FP-1300 Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung