National Instruments PXIe-6591R Bedienungsanleitung

GETTING STARTED GUIDE

NI PXIe-6591R

High-Speed Serial Module

This document explains how to install your NI PXIe-6591R (NI 6591R) high-speed serial

module.

The NI 6591R provides access to FPGA multi-gigabit transceivers (MGTs) via Component

Level IP (CLIP) for use in the following applications:

• Functional test for semiconductor production

• Protocol functional test

• Device interfacing

• High performance embedded systems

For more information about features and programming, refer to the NI High-Speed Serial

Instruments User Manual. For device specifications, refer to the specifications document for

your device. To access these documents, select Start»All Programs»National Instruments»

High Speed Serial Instruments»High Speed Serial Instruments Documentation.

For the most current versions of documentation, visit ni.com/manuals. For the latest version of

the NI LabVIEW Instrument Design Libraries for High Speed Serial Instruments driver, visit

ni.com/downloads.

Caution The protection provided by this product may be impaired if it is used in a

manner not described in this document.

Contents

Electromagnetic Compatibility Guidelines...............................................................................2

How to Use Your Documentation Set....................................................................................... 2

Device Front Panels.................................................................................................................. 3

Verifying the System Requirements..........................................................................................4

NI 6591R Kit Contents............................................................................................................. 5

Preparing the Environment....................................................................................................... 5

Unpacking the Kit..................................................................................................................... 5

Installing the Software.............................................................................................................. 6

Installing the NI 6591R Module............................................................................................... 6

Configuring the NI 6591R in MAX..........................................................................................7

Accessing Sample Projects....................................................................................................... 8

Troubleshooting........................................................................................................................ 8

What Should I Do if the NI 6591R Doesn't Appear in MAX?......................................... 8

Where to Go Next..................................................................................................................... 8

Worldwide Support and Services.............................................................................................. 9

Electromagnetic Compatibility Guidelines

This product was tested and complies with the regulatory requirements and limits for

electromagnetic compatibility (EMC) stated in the product specifications. These requirements

and limits provide reasonable protection against harmful interference when the product is

operated in the intended operational electromagnetic environment.

This product is intended for use in industrial locations. However, harmful interference may

occur in some installations, when the product is connected to a peripheral device or test object,

or if the product is used in residential or commercial areas. To minimize interference with

radio and television reception and prevent unacceptable performance degradation, install and

use this product in strict accordance with the instructions in the product documentation.

Furthermore, any changes or modifications to the product not expressly approved by National

Instruments could void your authority to operate it under your local regulatory rules.

Caution To ensure the specified EMC performance, operate this product only with

shielded cables and accessories.

Caution To ensure the specified EMC performance, the length of all I/O cables

must be no longer than 3 m (10 ft).

Caution To ensure the specified EMC performance, you must install PXI EMC

Filler Panels, National Instruments part number 778700-01, in all open chassis slots.

A kit of six single slot EMC Filler Panels can be ordered directly from NI by visiting

ni.com/info and entering partnumber.

How to Use Your Documentation Set

Refer to the following table to learn how to use your documentation set.

Table 1. NI 6591R Document Locations and Descriptions

Document Location Description

NI PXIe-6591R Getting

Started Guide (this

document)

Available from the Start

menu and at ni.com/

manuals.

Contains installation instructions for

your NI 6591R device and driver

software.

NI High Speed Serial

Instruments User Manual

Available from the Start

menu and at ni.com/

manuals.

Contains information about

developing applications for the

NI 6591R and NI 6592R.

2| ni.com | NI PXIe-6591R Getting Started Guide

Table 1. NI 6591R Document Locations and Descriptions (Continued)

Document Location Description

NI High Speed Serial

Instruments Help

Available from the Start

menu and at ni.com/

manuals.

Contains hardware and

programming support for

NI LabVIEW Instrument Design

Libraries for High Speed Serial

Instruments and the NI 6591 and

NI 6592 modules.

NI PXIe-6591R

Specifications

Available from the Start

menu and at ni.com/

manuals.

Contains specifications for your

NI 6591R module.

Device Front Panels

The following figure shows the available signals on the NI 6591R.

NI PXIe-6591R Getting Started Guide | © National Instruments | 3

Figure 1. NI 6591R Front Panel and Connector Pinouts

GND

RESERVED

GND

RESERVED

GND

RESERVED

GND

RESERVED

GND

RESERVED

GND

RESERVED

GND

RESERVED

GND

RESERVED

GND

RESERVED

GND

RESERVED

GND

RESERVED

GND

RESERVED

GND

Rx+ 1

Rx– 1

GND

Rx+ 3

Rx– 3

GND

SCL

SDA

GND

Tx+ 1

Tx– 1

GND

Tx+ 3

Tx– 3

GND

Optical 3.3 V

GPIO

GND

Rx+ 0

Rx– 0

GND

Rx+ 2

Rx– 2

GND

Optical 3.3 V

EEPROM 3.3 V

GND

Tx+ 0

Tx– 0

GND

Tx+ 2

Tx– 2

GND

x2 (1 per Port)

NI PXIe-6591R

ACCESS

CLK IN/

OUT

DIGITAL DATA & CONTROL

PORT

ACTIVE

12.5 Gbps Serial Digital

GND

DIO 1

DIO 3

GND

DIO 5

RESERVED

DIO 7

GND

DIO 9

GND

DIO 11

GND

DIO 13

GND

DIO 15

GND

DIO 17

GND

DIO 19

RESERVED

GND

DIO 0

RESERVED

DIO 2

GND

DIO 4

GND

DIO 6

GND

DIO 8

GND

DIO 10

GND

DIO 12

RESERVED

DIO 14

GND

DIO 16

GND

DIO 18

GND

Verifying the System Requirements

To use the NI LabVIEW Instrument Design Libraries for High Speed Serial Instruments

instrument driver, your system must meet certain requirements.

Refer to the product readme, which is available on the driver software media or online at

ni.com/manuals, for more information about minimum system requirements,

recommended system, and supported application development environments (ADEs).

4| ni.com | NI PXIe-6591R Getting Started Guide

NI 6591R Kit Contents

The following items are included in the device kit:

• The NI 6591R

• The NI LabVIEW Instrument Design Libraries for High Speed Serial Instruments driver

software media

• Other included items:

–Read Me First: Safety and Electromagnetic Compatibility

–Maintain Forced-Air Cooling Note to Users

Preparing the Environment

Ensure that the environment you are using the NI 6591R in meets the following specifications.

Operating ambient temperature

(IEC-60068-2-1, IEC-60068-2-2)

0 °C to 45 °C

Operating relative humidity (IEC-60068-2-56) 10% to 90%, noncondensing

Maximum altitude 2,000 m (800 mbar)

(at 25 °C ambient temperature)

Pollution degree 2

Indoor use only.

Caution Clean the hardware with a soft, nonmetallic brush. Make sure that the

hardware is completely dry and free from contaminants before returning it to

service.

Note Refer to the NI PXIe-6591R Specifications at ni.com/manuals for complete

specifications.

Unpacking the Kit

Caution To prevent electrostatic discharge (ESD) from damaging the device,

ground yourself using a grounding strap or by holding a grounded object, such as

your computer chassis.

1. Touch the antistatic package to a metal part of the computer chassis.

2. Remove the device from the package and inspect the device for loose components or any

other sign of damage.

Caution Never touch the exposed pins of connectors.

NI PXIe-6591R Getting Started Guide | © National Instruments | 5

Note Do not install a device if it appears damaged in any way.

3. Unpack any other items and documentation from the kit.

Store the device in the antistatic package when the device is not in use.

Installing the Software

You must install the NI LabVIEW Instrument Design Libraries for High Speed Serial

Instruments driver software before installing the NI 6591R.

1. Install LabVIEW. Refer to the LabVIEW Installation Guide for installation instructions

and system requirements. Refer to the LabVIEW Upgrade Notes for additional

information about upgrading to the most recent version of LabVIEW.

Documentation for LabVIEW is available at ni.com/manuals and by selecting Start»All

Programs»National Instruments»LabVIEW»LabVIEW Manuals.

2. Install the LabVIEW FPGA Module. Refer to the LabVIEW FPGA Module Release and

Upgrade Notes for installation instructions and information about getting started with the

LabVIEW FPGA Module.

Documentation for the LabVIEW FPGA Module is available is available at ni.com/

manuals and by selecting Start»All Programs»National Instruments»LabVIEW»

LabVIEW Manuals.

3. Install the NI LabVIEW Instrument Design Libraries for High Speed Serial Instruments

Help driver. Refer to the NI High Speed Serial Instruments Readme on the NI LabVIEW

Instrument Design Libraries for High Speed Serial Instruments installation media for

system requirements and installation instructions for the NI LabVIEW Instrument Design

Libraries for High Speed Serial Instruments driver.

Documentation for the NI LabVIEW Instrument Design Libraries for High Speed Serial

Instruments driver is available at ni.com/manuals and by selecting Start»All Programs»

National Instruments»High Speed Serial Instruments»High Speed Serial

Instruments Documentation.

Installing the NI 6591R Module

Note You must install the software before you install the hardware.

1. Power off and unplug the chassis. Refer to your chassis manual to install or configure the

chassis.

2. Identify a supported module slot in the chassis. The figure below shows the symbols that

indicate the slot types in the chassis.

6| ni.com | NI PXIe-6591R Getting Started Guide

Figure 2. Symbols for Module Slots

NI PXIe-1062Q

1. PXI Express System Controller Slot

2. PXI Peripheral Slot

3. PXI Express Hybrid Peripheral Slot

4. PXI Express System Timing Slot

5. PXI Express Peripheral Slot

PXI Express devices can be placed only in PXI Express slots and PXIe Express Hybrid

slots. Refer to the chassis documentation for details.

3. Remove the filler panel of an unused module slot.

4. Touch any metal part of the chassis to discharge any static electricity. Place the module

edges into the module guides at the top and bottom of the chassis, and slide the module

into the chassis until the module is fully inserted.

5. Secure the device front panel to the chassis front panel mounting rail using the front panel

mounting screws.

6. Plug in and power on the chassis.

Configuring the NI 6591R in MAX

Use Measurement & Automation Explorer (MAX) to configure your National Instruments

hardware. MAX informs other programs about which devices reside in the system and how

they are configured. MAX is automatically installed with NI LabVIEW Instrument Design

Libraries for High Speed Serial Instruments.

1. Launch MAX by navigating to Start»All Programs»National Instruments»NI MAX or

by clicking the NI MAX desktop icon.

2. In the Configuration pane, double-click Devices and Interfaces to see the list of installed

devices. Installed devices appear under the name of their associated chassis.

3. Expand your Chassis tree item. MAX lists all devices installed in the chassis. Your

default device names may vary.

Note If you do not see your device listed, press <F5> to refresh the list of

installed devices. If the device is still not listed, power off the system, ensure

the device is correctly installed, and restart.

4. Record the device identifier MAX assigns to the hardware. Use this identifier when

programming the NI 6591R.

5. Close MAX.

NI PXIe-6591R Getting Started Guide | © National Instruments | 7

Accessing Sample Projects

NI LabVIEW Instrument Design Libraries for High Speed Serial Instruments includes sample

projects to help you get started designing for the NI 6591R.

1. Open LabVIEW and select Create Project.

2. In the Create Project dialog box, select High-Speed Serial and select a sample project

for your device.

3. Click Next.

4. Configure the Project Name, Project Root, and File Name Prefix (Optional) fields.

5. Click Finish.

Troubleshooting

What Should I Do if the NI 6591R Doesn't Appear in

MAX?

1. In the MAX configuration tree, click Devices and Interfaces.

2. Expand the Chassis tree to see the list of installed devices, and press <F5> to refresh the

list.

3. If the module is still not listed, power off the system, ensure that all hardware is correctly

installed, and restart the system.

4. Navigate to the Device Manager.

Operating System Description

Windows 8.x/8 Right-click the Start screen, and select All apps»Control Panel»

Hardware and Sound»Device Manager.

Windows 7 Select Start»Control Panel»System»Hardware»Device Manager.

5. If you are using a PXI controller, verify that a National Instruments entry appears in the

system device list. Reinstall NI LabVIEW Instrument Design Libraries for High Speed

Serial Instruments and the device if error conditions appear in the list. If you are using an

MXI controller, right-click PCI-to-PCI Bridge, and select Properties from the shortcut

menu to verify that the bridge is enabled.

Where to Go Next

Refer to the following figure for information about other product tasks and associated

resources for those tasks.

8| ni.com | NI PXIe-6591R Getting Started Guide

custom applications within

an application programming

interface (API).

about hardware features

or review device specifications.

more about your products through ni.com.

the application development

environment (ADE)

for your application.

*This item is also installed with the driver software.

EXPLORE LEARN CREATE

DISCOVER

Support

ni.com/support

NI PXIe-6592R

Specifications*

NI PXIe-6592R

Getting Started Guide*

NI PXIe-6591R

Specifications*

NI PXIe-6591R

Getting Started Guide*

NI High Speed Serial

Instruments User Manual

NI High Speed Serial

Instruments Help*

Located at ni.com/manuals and from the Start menu

High-Speed Serial

ni.com/software-designed-instruments

Services

ni.com/services

Located at ni.com/gettingstarted

Learn LabVIEW Basics

Worldwide Support and Services

The National Instruments website is your complete resource for technical support. At ni.com/

support, you have access to everything from troubleshooting and application development

self-help resources to email and phone assistance from NI Application Engineers.

Visit ni.com/services for NI Factory Installation Services, repairs, extended warranty, and

other services.

Visit ni.com/register to register your National Instruments product. Product registration

facilitates technical support and ensures that you receive important information updates from

NI.

A Declaration of Conformity (DoC) is our claim of compliance with the Council of the

European Communities using the manufacturer’s declaration of conformity. This system

affords the user protection for electromagnetic compatibility (EMC) and product safety. You

can obtain the DoC for your product by visiting ni.com/certification. If your product supports

calibration, you can obtain the calibration certificate for your product at ni.com/calibration.

National Instruments corporate headquarters is located at 11500 North Mopac Expressway,

Austin, Texas, 78759-3504. National Instruments also has offices located around the world.

For telephone support in the United States, create your service request at ni.com/support or

dial 1 866 ASK MYNI (275 6964). For telephone support outside the United States, visit the

Worldwide Offices section of ni.com/niglobal to access the branch office websites, which

provide up-to-date contact information, support phone numbers, email addresses, and current

events.

Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on National Instruments trademarks.

Other product and company names mentioned herein are trademarks or trade names of their respective companies. For patents

covering National Instruments products/technology, refer to the appropriate location: Help»Patents in your software, the

patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents. You can find information about

end-user license agreements (EULAs) and third-party legal notices in the readme file for your NI product. Refer to the Export

Compliance Information at ni.com/legal/export-compliance for the National Instruments global trade compliance policy and

how to obtain relevant HTS codes, ECCNs, and other import/export data. NI MAKES NO EXPRESS OR IMPLIED WARRANTIES

AS TO THE ACCURACY OF THE INFORMATION CONTAINED HEREIN AND SHALL NOT BE LIABLE FOR ANY ERRORS.

U.S. Government Customers: The data contained in this manual was developed at private expense and is subject to the

applicable limited rights and restricted data rights as set forth in FAR 52.227-14, DFAR 252.227-7014, and DFAR 252.227-7015.

376274B-01 Jun15

Andere Handbücher für PXIe-6591R

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere National Instruments Steuereinheit Handbücher

National Instruments

National Instruments NI 9757 Bedienungsanleitung

National Instruments

National Instruments SCXI-1100 Bedienungsanleitung

National Instruments

National Instruments Module SCXI-1503 Handbuch

National Instruments

National Instruments PXIe-5693 Bedienungsanleitung

National Instruments

National Instruments NI PXIe-8374 Bedienungsanleitung

National Instruments

National Instruments NI-5783 Bedienungsanleitung

National Instruments

National Instruments FieldPoint FP-AO-210 Bedienungsanleitung

National Instruments

National Instruments FieldPoint cFP-DI-304 Bedienungsanleitung

National Instruments

National Instruments NI 9469 Bedienungsanleitung

National Instruments

National Instruments NI-9208 Bedienungsanleitung

National Instruments

National Instruments ATCA-3671 Bedienungsanleitung

National Instruments

National Instruments NI 9852 Bedienungsanleitung

National Instruments

National Instruments SCC-LP Series Bedienungsanleitung

National Instruments

National Instruments 9266 Bedienungsanleitung

National Instruments

National Instruments SCXI Series Bedienungsanleitung

National Instruments

National Instruments NI 9402 Bedienungsanleitung

National Instruments

National Instruments VXI-8340 Series Bedienungsanleitung

National Instruments

National Instruments NI 9852 Bedienungsanleitung

National Instruments

National Instruments 9512 C Series Bedienungsanleitung

National Instruments

National Instruments Phase Matrix PXI-1420 Bedienungsanleitung

National Instruments

National Instruments NI-9361 Handbuch

National Instruments

National Instruments PXIe-8521 Bedienungsanleitung

National Instruments

National Instruments SCC-DO01 Bedienungsanleitung

National Instruments

National Instruments NI 9802 Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung