National Instruments NI-9244 Bedienungsanleitung

NI-9244 Getting

Started

2022-07-06

Contents

Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Safety Guidelines. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Safety Voltages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Safety Guidelines for Hazardous Voltages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Safety Guidelines for Hazardous Locations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Electromagnetic Compatibility Guidelines. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Special Conditions for Marine Applications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Preparing the Environment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

NI 9244 Pinout. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Connecting Phase Measurements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Three-Phase Measurement Configurations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Connecting Single-Phase Measurement Configurations. . . . . . . . . . . . . . . . . . . . 10

Connection Guidelines. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

High-Vibration Application Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Wiring the NI 9969. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Converting L-N Measurements to L-Earth. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Converting L-N Measurements to L-L. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Where to Go Next. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

NI Services. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

ni.com

NI-9244 Getting Started

Overview

This document explains how to connect to the NI-9244.

Note Before you begin, read the NI-9244 Safety, Environmental, and

Regulatory Information document on ni.com/manuals and complete the

soware and hardware installation procedures in your chassis

documentation.

Note The guidelines in this document are specific to the NI-9244. The

other components in the system might not meet the same safety ratings.

Refer to the documentation for each component in the system to

determine the safety and EMC ratings for the entire system.

Safety Guidelines

Caution Observe all instructions and cautions in the user documentation.

Using the product in a manner not specified can damage the product and

compromise the built-in safety protection.

Attention Suivez toutes les instructions et respectez toutes les mises

en garde de la documentation d'utilisation. L'utilisation du produit de

toute autre façon que celle spécifiée risque de l'endommager et de

compromettre la protection de sécurité intégrée.

Safety Voltages

Connect only voltages that are within the following limits.

Maximum working voltage, channel-to-earth ground

Up to 2,000 m altitude

NI-9244 Getting Started

Continuous 400 Vrms, Measurement Category III

Up to 5,000 m altitude

Continuous 400 Vrms, Measurement Category II or 300 Vrms,Measurement Category III

Division 2 and Zone 2 hazardous locations applications

Channel-to-earth ground 300 Vrms, Measurement Category III

Safety Guidelines for Hazardous Voltages

If hazardous voltages are connected to the product, take the following precautions.

A hazardous voltage is a voltage greater than:

■ 30 V RMS, 42.4 V peak, or 60 V DC in DRY LOCATIONS

■ 16 V RMS, 22.6 V peak, or 35 V DC in WET LOCATIONS

Caution Ensure that hazardous voltage wiring is performed only by

qualified personnel adhering to local electrical standards.

Attention S'assurer que le câblage à tension dangereuse est eectué par

du personnel qualifié respectant les normes électriques locales.

Caution Do not mix hazardous voltage circuits and human-accessible

circuits on the same product.

Attention Ne pas combiner des circuits avec des tensions dangereuses et

des circuits accessibles aux personnes sur le même produit.

ni.com

NI-9244 Getting Started

Caution When product terminals are hazardous voltage LIVE, you must

ensure that devices and circuits connected to the product are properly

insulated from human contact.

Attention Lorsqu'une haute tension dangereuse est appliquée aux

bornes du produit, vous devez vous assurer que les appareils et les circuits

auxquels il est connecté sont correctement isolés de tout contact humain.

Caution You must use the NI 9969 connector backshell kit to ensure that

the terminals are not accessible.

Safety Guidelines for Hazardous Locations

The NI-9244 is suitable for use in Class I, Division 2, Groups A, B, C, D, T4 hazardous

locations; Class I, Zone 2, AEx nA IIC T4 Gc and Ex nA IIC T4 Gc hazardous locations;

and nonhazardous locations only. Follow these guidelines if you are installing the

NI-9244 in a potentially explosive environment. Not following these guidelines may

result in serious injury or death.

Caution Do not disconnect I/O-side wires or connectors unless power has

been switched o or the area is known to be nonhazardous.

Caution Do not remove modules unless power has been switched o or

the area is known to be nonhazardous.

Caution Substitution of components may impair suitability for Class I,

Division 2, or Zone 2.

NI-9244 Getting Started

Caution The system must be installed in an enclosure certified for the

intended hazardous (classified) location, having a tool secured cover/door,

where a minimum protection of at least IP54 is provided.

Special Conditions for Hazardous Locations Use in Europe and

Internationally

The NI-9244 has been evaluated as Ex nA IIC T4 Gc equipment under

DEMKO 12ATEX 1202658X and is IECEx UL 14.0089X certified. Each NI-9244 is marked

II 3G and is suitable for use in Zone 2 hazardous locations, in ambient

temperatures of -40 °C ≤ Ta ≤ 70 °C. If you are using the NI-9244 in Gas Group IIC

hazardous locations, you must use the device in an NI chassis that has been

evaluated as Ex nC IIC T4, Ex IIC T4, Ex nA IIC T4, or Ex nL IIC T4 equipment.

Caution The system shall only be used in an area of not more than

Pollution Degree 2, as defined in IEC/EN 60664-1.

Caution The system shall be mounted in an ATEX/IECEx-certified

enclosure with a minimum ingress protection rating of at least IP54 as

defined in IEC/EN 60079-15.

Caution The enclosure must have a door or cover accessible only by the

use of a tool.

Electromagnetic Compatibility Guidelines

This product was tested and complies with the regulatory requirements and limits

for electromagnetic compatibility (EMC) stated in the product specifications. These

requirements and limits provide reasonable protection against harmful interference

when the product is operated in the intended operational electromagnetic

environment.

This product is intended for use in industrial locations. However, harmful

interference may occur in some installations, when the product is connected to a

ni.com

NI-9244 Getting Started

peripheral device or test object, or if the product is used in residential or

commercial areas. To minimize interference with radio and television reception and

prevent unacceptable performance degradation, install and use this product in strict

accordance with the instructions in the product documentation.

Furthermore, any changes or modifications to the product not expressly approved

by National Instruments could void your authority to operate it under your local

regulatory rules.

Special Conditions for Marine Applications

Some products are approved for marine (shipboard) applications. To verify marine

approval certification for a product, visit ni.com/product-certifications, search by

model number, and click the appropriate link.

Notice In order to meet the EMC requirements for marine applications,

install the product in a shielded enclosure with shielded and/or filtered

power and input/output ports. In addition, take precautions when

designing, selecting, and installing measurement probes and cables to

ensure that the desired EMC performance is attained.

Preparing the Environment

Ensure that the environment in which you are using the NI-9244 meets the following

specifications.

Operating temperature (IEC 60068-2-1, IEC 60068-2-2) -40 °C to 70 °C

Operating humidity (IEC 60068-2-30) 10% RH to 90% RH, noncondensing

Pollution Degree 2

Maximum altitude 5,000 m

Indoor use only.

Note Refer to the NI-9244 Specifications on ni.com/manuals for

complete specifications.

NI-9244 Getting Started

NI 9244 Pinout

AI0

AI1

AI2

Neutral

Signal Description

AI Analog input signal connection referenced to the Neutral signal

Neutral Referenced, single-ended analog input connection

Table 1. Signal Descriptions

Connecting Phase Measurements

The NI-9244 accepts three-phase and single-phase measurement configuration.

Three-Phase Measurement Configurations

NI recommends the following three-phase connection types.

4-Wire WYE Measurement Configuration

ni.com

NI-9244 Getting Started

NI 9244

AI0

Phase A

Phase B

Phase C

Neutral Neutral

AI2

AI1

High-Leg Delta Measurement Configuration

NI 9244

AI0

Phase A

Phase B

Phase C

Neutral

AI2

AI1

Neutral

3-Wire Delta Measurement Configuration

NI 9244

AI0

Phase A

Phase B

Phase C AI2

AI1

Corner Grounded 2-Wire Delta Measurement Configuration

NI-9244 Getting Started

NI 9244

AI0

Phase A

Phase B

Phase C AI2

AI1

The 9244 cannot measure the entire tolerance range or high crest factor signals on

690 Vrms systems in this configuration.

Connecting Single-Phase Measurement Configurations

NI recommends the following single-phase connection types.

3-Wire Measurement (Split Phase) Configuration

NI 9244

AI0

Neutral

AI1

2-Wire Measurement

NI 9244

AI0

Neutral

Connection Guidelines

■ You must use 2-wire ferrules to create a secure connection when connecting

more than one wire to a single terminal on the NI-9244.

ni.com

NI-9244 Getting Started

Andere Handbücher für NI-9244

Inhaltsverzeichnis

Andere National Instruments E/A-System Handbücher

National Instruments

National Instruments C Series Handbuch

National Instruments

National Instruments R Series Bedienungsanleitung

National Instruments

National Instruments USB-TC01 Handbuch

National Instruments

National Instruments NI-9238 Bedienungsanleitung

National Instruments

National Instruments R Series Bedienungsanleitung

National Instruments

National Instruments 9216 Handbuch

National Instruments

National Instruments 9218 Handbuch

National Instruments

National Instruments NI USB-9219 Bedienungsanleitung

National Instruments

National Instruments NI 9216 Bedienungsanleitung

National Instruments

National Instruments SC Express PXIe-4309 Bedienungsanleitung

National Instruments

National Instruments 9425E Bedienungsanleitung

National Instruments

National Instruments SC-2071 Bedienungsanleitung

National Instruments

National Instruments USB-9213 Bedienungsanleitung

National Instruments

National Instruments VXI-MIO Series Bedienungsanleitung

National Instruments

National Instruments NI-9361 Bedienungsanleitung

National Instruments

National Instruments NI USB-6000 Bedienungsanleitung

National Instruments

National Instruments R Series Bedienungsanleitung

National Instruments

National Instruments SCXI SCXI-1102 Handbuch

National Instruments

National Instruments NI 9752 Bedienungsanleitung

National Instruments

National Instruments PXI-6289 Bedienungsanleitung

National Instruments

National Instruments PXIe-7862R Bedienungsanleitung

National Instruments

National Instruments SCXI-1121 Handbuch

National Instruments

National Instruments TB-9212 Handbuch

National Instruments

National Instruments USB-6001 Bedienungsanleitung

Beliebte E/A-System Handbücher anderer Marken

WAGO

WAGO 750-344 Bedienungsanleitung

Teknim

Teknim TWM-1887 Bedienungsanleitung

Intelligent Appliance

Intelligent Appliance IA-2662-E Bedienungsanleitung

BERGHOF

BERGHOF ECC DIO 16/16 Bedienungsanleitung

Advantech

Advantech PCM-27J3AU Installations- und Betriebshandbuch

Festo

Festo CP-E08-M12-CL Bedienungsanleitung

Measurement Computing

Measurement Computing PCI-DAS64/M1/16 Bedienungsanleitung

Hitachi

Hitachi HX-RIO3 Series Bedienungsanleitung

NUUO

NUUO SCB-A08 Bedienungsanleitung

M-system

M-system R3Y-RS8 Bedienungsanleitung

jablotron

jablotron JB-110N Bedienungsanleitung

Omron

Omron SYSMAC C200H Bedienungsanleitung

DOLD

DOLD SAFEMASTER M Bedienungsanleitung

ABB

ABB OPT-MF-001 Bedienungsanleitung

Omron

Omron SYSMAC C2000H Bedienungsanleitung

Helmholz

Helmholz TB20 Bedienungsanleitung

ICP DAS USA

ICP DAS USA tM-AD2 Bedienungsanleitung

Automationdirect.com

Automationdirect.com DL305 Bedienungsanleitung