National Instruments FieldPoint FP-3000 Bedienungsanleitung

FieldPoint™FP-3000

Network Module User Manual

FieldPoint FP-3000 User Manual

January 1999 Edition

Part Number 322169A-01

Worldwide Technical Support and Product Information

http://www.natinst.com

National Instruments Corporate Headquarters

11500 North Mopac Expressway Austin, Texas 78759-3504 USA Tel: 512 794 0100

Worldwide Offices

Australia 03 9879 5166, Austria 0662 45 79 90 0, Belgium 02 757 00 20, Brazil 011 284 5011,

Canada (Ontario) 905 785 0085, Canada (Québec) 514 694 8521, Denmark 45 76 26 00, Finland 09 725 725 11,

France 0 1 48 14 24 24, Germany 089 741 31 30, Hong Kong 2645 3186, India 91805275406,

Israel 03 6120092, Italy 02 413091, Japan 03 5472 2970, Korea 02 596 7456, Mexico (D.F.) 5 280 7625,

Mexico (Monterrey) 8 357 7695, Netherlands 0348 433466, Norway 32 84 84 00, Singapore 2265886,

Spain (Madrid) 91 640 0085, Spain (Barcelona) 93 582 0251, Sweden 08 587 895 00,

Switzerland 056 200 51 51, Taiwan 02 2377 1200, United Kingdom 01635 523545

For further support information, see the Technical Support Resources appendix of this manual.

Important Information

Warranty

The FieldPoint FP-3000 network module is warranted against defects in materials and workmanship for a period of one

year from the date of shipment, as evidenced by receipts or other documentation. National Instruments will, at its option,

repair or replace equipment that proves to be defective during the warranty period. This warranty includes parts and labor.

The media on which you receive National Instruments software are warranted not to fail to execute programming

instructions, due to defects in materials and workmanship, for a period of 90 days from date of shipment, as evidenced

by receipts or other documentation. National Instruments will, at its option, repair or replace software media that do not

execute programming instructions if National Instruments receives notice of such defects during the warranty period.

National Instruments does not warrant that the operation of the software shall be uninterrupted or error free.

A Return Material Authorization (RMA) number must be obtained from the factory and clearly marked on the outside of

the package before any equipment will be accepted for warranty work. National Instruments will pay the shipping costs

of returning to the owner parts which are covered by warranty.

National Instruments believes that the information in this document is accurate. The document has been carefully

reviewed for technical accuracy. In the event that technical or typographical errors exist, National Instruments reserves

the right to make changes to subsequent editions of this document without prior notice to holders of this edition. The

reader should consult National Instruments if errors are suspected. In no event shall National Instruments be liable for

any damages arising out of or related to this document or the information contained in it.

EXCEPT AS SPECIFIED HEREIN, NATIONAL INSTRUMENTS MAKES NO WARRANTIES, EXPRESS OR IMPLIED, AND SPECIFICALLY DISCLAIMS

ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR APARTICULAR PURPOSE. CUSTOMER’SRIGHT TO RECOVER DAMAGES CAUSED

BY FAULT OR NEGLIGENCE ON THE PART OF NATIONAL INSTRUMENTS SHALL BE LIMITED TO THE AMOUNT THERETOFORE PAID BY THE

CUSTOMER. NATIONAL INSTRUMENTS WILL NOT BE LIABLE FOR DAMAGES RESULTING FROM LOSS OF DATA, PROFITS, USE OF PRODUCTS,

OR INCIDENTAL OR CONSEQUENTIAL DAMAGES, EVEN IF ADVISED OF THE POSSIBILITY THEREOF. This limitation of the liability of

National Instruments will apply regardless of the form of action, whether in contract or tort, including negligence. Any

action against National Instruments must be brought within one year after the cause of action accrues. National

Instruments shall not be liable for any delay in performance due to causes beyond its reasonable control. The warranty

provided herein does not cover damages, defects, malfunctions, or service failures caused by owner’s failure to follow

the National Instruments installation, operation, or maintenance instructions; owner’s modification of the product;

owner’s abuse, misuse, or negligent acts; and power failure or surges, fire, flood, accident, actions of third parties, or other

events outside reasonable control.

Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical,

including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without

the prior written consent of National Instruments Corporation.

Trademarks

FieldPoint™, Lookout™, natinst.com™, and NI-FBUS™ are trademarks of National Instruments Corporation.

Product and company names mentioned herein are trademarks or trade names of their respective companies.

WARNING REGARDING MEDICAL AND CLINICAL USE OF NATIONAL INSTRUMENTS PRODUCTS

National Instruments products are not designed with components and testing intended to ensure a level of reliability

suitable for use in treatment and diagnosis of humans. Applications of National Instruments products involving medical

or clinical treatment can create a potential for accidental injury caused by product failure, or by errors on the part of the

user or application designer. Any use or application of National Instruments products for or involving medical or clinical

treatment must be performed by properly trained and qualified medical personnel, and all traditional medical safeguards,

equipment, and procedures thatare appropriate in the particular situation to prevent serious injury or death should always

continue to be used when National Instruments products are being used. National Instruments products are NOT intended

to be a substitute for any form of established process, procedure, or equipment used to monitor or safeguard human health

and safety in medical or clinical treatment.

National Instruments Corporation v FieldPoint FP-3000 User Manual

Contents

About This Manual

Conventions ...................................................................................................................xv

Related Documentation..................................................................................................xv

Chapter 1

FP-3000 Network Module Overview

Overview of the FP-3000 Network Module ..................................................................1-1

Features of the FP-3000 Network Module ....................................................................1-3

Function Blocks...............................................................................................1-3

PID Control .....................................................................................................1-3

Block Instantiation...........................................................................................1-3

Interoperability................................................................................................1-4

Link Active Scheduler (LAS) Functionality ...................................................1-4

HotPnP (Hot Plug and Play)............................................................................1-4

Field Upgradability..........................................................................................1-4

Chapter 2

Installation and Configuration

Install the Device Description File ................................................................................2-1

Updating the Device Description ....................................................................2-3

Mount the FP-3000 and Terminal Bases .......................................................................2-4

Mounting the FP-3000 on a DIN Rail.............................................................2-4

Connecting Terminal Bases with DIN Rail Mounting......................2-5

Removing the FP-3000 from the DIN Rail.......................................2-6

Mounting the FP-3000 to a Panel....................................................................2-6

Connecting Terminal Bases with Panel Mounting ...........................2-7

Removing the FP-3000 and Terminal Bases from the Panel............2-8

Mount I/O Modules onto Terminal Bases .....................................................................2-8

Connect Power to the FP-3000......................................................................................2-9

Calculating Power for a FieldPoint Bank........................................................2-9

Power-On Self Test (POST) ..........................................................................................2-10

Connect the FP-3000 to the Fieldbus Network..............................................................2-10

LED Indicators...............................................................................................................2-12

HotPnP (Hot Plug and Play)..........................................................................................2-14

HotPnP During Operation ...............................................................................2-14

Inserting New I/O Modules...............................................................2-15

Replacing I/O Modules.....................................................................2-15

Updating the FP-3000 Firmware ...................................................................................2-15

Contents

FieldPoint FP-3000 User Manual vi

National Instruments Corporation

Chapter 3

Example Applications

Initial Power On: Assigning Address and Device Tag..................................................3-1

Example 1: Converting a 4–20 mA Pressure Sensor to Fieldbus Using FP-3000 ........ 3-2

Getting Started ................................................................................................3-2

Convert the Pressure Sensor Reading.............................................................3-2

Create Function Block......................................................................3-2

Assign a Tag to the New Block........................................................3-3

Select the Module and Channel........................................................3-3

Set the Input Range...........................................................................3-4

Scale the Reading ............................................................................. 3-4

Set Up Scheduling ............................................................................3-5

Bring the Block Online.....................................................................3-6

Example 2: Temperature Control with the FP-3000 .....................................................3-6

Getting Started ................................................................................................3-6

Taking Temperature Readings........................................................................ 3-7

Create an FP-TC-120 Block .............................................................3-7

Assign a Tag to the New Block........................................................3-7

Select the Module and Channel........................................................3-7

Set the Input Range and Thermocouple Type ..................................3-8

Scale the Reading ............................................................................. 3-8

Set Up Scheduling ............................................................................3-9

Bring the Block Online.....................................................................3-10

Controlling a Heating Element .......................................................................3-10

Instantiate an FP-AO-200 Block ......................................................3-10

Assign a Tag to the New Block........................................................3-10

Select the Module and Channel........................................................3-11

Set the Output Range........................................................................3-11

Scale the Output................................................................................3-11

Set Up Scheduling ............................................................................3-12

Bring the Block Online.....................................................................3-12

PID Control.....................................................................................................3-13

Instantiate a PID Block.....................................................................3-13

Assign a Tag to the New Block........................................................3-13

Scale the PID ....................................................................................3-13

Connect the PID to the AI and AO Blocks.......................................3-14

Download and Bring the Loop into Auto.........................................3-14

Tune the PID.....................................................................................3-15

Alarming .........................................................................................................3-15

Contents

National Instruments Corporation vii FieldPoint FP-3000 User Manual

Chapter 4

Block Reference

Block Overview.............................................................................................................4-1

Function Blocks...............................................................................................4-1

Resource Block................................................................................................4-2

Types of Function Blocks..............................................................................................4-2

AI (Analog Input)............................................................................................4-2

AO (Analog Output)........................................................................................4-2

PID (Proportional–Integral–Derivative)..........................................................4-3

DI (Discrete Input) ..........................................................................................4-3

DO (Discrete Output)......................................................................................4-3

CDO (Complex Discrete Output)....................................................................4-3

LOG (FieldPoint Log Block) (FP-3000 Specific)...........................................4-4

STAT (FieldPoint Statistics Block) (FP-3000 Specific).................................4-4

Function Blocks and FieldPoint Modules......................................................................4-4

PID Control.................................................................................................................... 4-5

Alarming........................................................................................................................4-6

Alarm Parameters............................................................................................4-6

UNACKNOWLEDGED...................................................................4-7

ALARM_STATE/UPDATE_STATE ..............................................4-7

TIME_STAMP..................................................................................4-8

SUBCODE........................................................................................4-8

VALUE.............................................................................................4-8

Status and Mode Handling Overview............................................................................4-8

Status Handling ...............................................................................................4-8

Quality...............................................................................................4-9

Substatus ...........................................................................................4-9

Limit..................................................................................................4-10

MODE_BLK Parameter and Mode Handling.................................................4-10

Target Mode......................................................................................4-10

Actual Mode......................................................................................4-11

Permitted Mode.................................................................................4-12

Normal Mode....................................................................................4-12

FP-3000 Specific Parameters.........................................................................................4-13

CFG_OPTS......................................................................................................4-13

DEV_OPTS.....................................................................................................4-13

EXECUTION_STATISTICS..........................................................................4-13

FIELDPOINT_CHANNEL.............................................................................4-14

FIELDPOINT_MODULE...............................................................................4-14

FP_AI_100_RANGE.......................................................................................4-14

FP_AI_110_RANGE.......................................................................................4-14

FP_AI_111_RANGE.......................................................................................4-14

FP_AO_200_RANGE.....................................................................................4-15

Contents

FieldPoint FP-3000 User Manual viii

National Instruments Corporation

FP_CJC_SOURCE..........................................................................................4-15

FP_MOD_STATUS........................................................................................4-15

FP_NOISE_REJECTION...............................................................................4-15

FP_PWM_520_PERIOD ................................................................................ 4-16

FP_RTD_122_RANGE .................................................................................. 4-16

FP_RTD_TYPE ..............................................................................................4-16

FP_TC_120_RANGE ..................................................................................... 4-16

FP_TC_120_CJ_RANGE...............................................................................4-16

FP_THERMOCOUPLE_TYPE......................................................................4-16

LAST_BLOCK_EVENT................................................................................4-16

VERSION_INFORMATION .........................................................................4-17

Appendix A

Configuring the FP-3000

Simulate Enable.............................................................................................................A-1

Write Lock.....................................................................................................................A-2

Reset..............................................................................................................................A-2

Appendix B

Troubleshooting

Fieldbus Communication Problems ..............................................................................B-1

Setting Device Tag and Network Address......................................................B-1

I/O Module Problems...................................................................................... B-3

Software Configuration Problems...................................................................B-3

Appendix C

Fieldbus Parameters

ACK_OPTION................................................................................................C-1

ALARM_HYS................................................................................................C-1

ALARM_SUM................................................................................................C-1

ALERT_KEY..................................................................................................C-1

ALG_RUN_TIME..........................................................................................C-1

BAL_TIME.....................................................................................................C-1

BINARY_CL..................................................................................................C-1

BINARY_OP..................................................................................................C-2

BKCAL_HYS.................................................................................................C-2

BKCAL_IN.....................................................................................................C-2

BKCAL_OUT.................................................................................................C-2

BLOCK_ALM................................................................................................C-2

BLOCK_ERR .................................................................................................C-2

BLOCK_RESET.............................................................................................C-4

Contents

National Instruments Corporation ix FieldPoint FP-3000 User Manual

BYPASS..........................................................................................................C-4

CHANNEL......................................................................................................C-4

CHECKBACK ................................................................................................C-4

CLR_FSTATE.................................................................................................C-5

CONFIRM_TIME...........................................................................................C-5

CONTROL_OPTS ..........................................................................................C-6

CYCLE_SEL/CYCLE_TYPE.........................................................................C-6

DD_RESOURCE ............................................................................................C-6

DD_REV .........................................................................................................C-7

DEV_REV.......................................................................................................C-7

DEV_TYPE.....................................................................................................C-7

DV_HI_ALM..................................................................................................C-7

DV_HI_LIM....................................................................................................C-7

DV_HI_PRI.....................................................................................................C-7

DV_LO_ALM.................................................................................................C-7

DV_LO_LIM...................................................................................................C-7

DV_LO_PRI....................................................................................................C-7

FAULT_STATE..............................................................................................C-7

FEATURE_SEL/FEATURES.........................................................................C-8

FF_GAIN.........................................................................................................C-8

FF_SCALE......................................................................................................C-8

FF_VAL ..........................................................................................................C-9

FIELD_VAL....................................................................................................C-9

FP_AUTOCONFIGURE.................................................................................C-9

FP_MOD_LIST...............................................................................................C-9

FREE_SPACE.................................................................................................C-9

FREE_TIME....................................................................................................C-9

GAIN...............................................................................................................C-9

GRANT_DENY..............................................................................................C-9

HARD_TYPES................................................................................................C-10

HI_ALM..........................................................................................................C-10

HI_HI_ALM....................................................................................................C-10

HI_HI_LIM .....................................................................................................C-10

HI_HI_PRI ......................................................................................................C-10

HI_LIM............................................................................................................C-10

HI_PRI.............................................................................................................C-10

IO_OPTS.........................................................................................................C-10

L_TYPE...........................................................................................................C-11

LIM_NOTIFY.................................................................................................C-12

LO_ALM.........................................................................................................C-12

LO_LIM ..........................................................................................................C-12

LO_LO_ALM..................................................................................................C-12

LO_LO_LIM...................................................................................................C-12

LO_LO_PRI....................................................................................................C-12

Contents

FieldPoint FP-3000 User Manual x

National Instruments Corporation

LO_PRI...........................................................................................................C-13

LOW_CUT......................................................................................................C-13

MANUFAC_ID ..............................................................................................C-13

MAX_NOTIFY...............................................................................................C-13

MEMORY_SIZE............................................................................................C-13

MIN_CYCLE_T .............................................................................................C-13

MODE_BLK...................................................................................................C-13

NV_CYCLE_T ...............................................................................................C-14

OP_CMD_CXO..............................................................................................C-15

OUT ................................................................................................................C-15

OUT_HI_LIM.................................................................................................C-15

OUT_LO_LIM................................................................................................C-15

OUT_SCALE..................................................................................................C-15

PV....................................................................................................................C-16

PV_FTIME......................................................................................................C-16

PV_SCALE.....................................................................................................C-16

RATE..............................................................................................................C-16

RCAS_IN........................................................................................................C-16

RCAS_OUT....................................................................................................C-17

RESET ............................................................................................................C-17

RESTART.......................................................................................................C-17

ROUT_IN........................................................................................................C-17

ROUT_OUT....................................................................................................C-17

RS_STATE .....................................................................................................C-18

SAFEGUARD_CL..........................................................................................C-18

SAFEGUARD_OP..........................................................................................C-18

SET_FSTATE.................................................................................................C-18

SHED_OPT.....................................................................................................C-18

SHED_RCAS..................................................................................................C-19

SHED_ROUT .................................................................................................C-19

SIMULATE ....................................................................................................C-19

SP_HI_LIM.....................................................................................................C-19

SP_LO_LIM....................................................................................................C-19

SP_RATE_DN................................................................................................C-20

SP_RATE_UP.................................................................................................C-20

ST_REV..........................................................................................................C-20

STATUS_OPTS..............................................................................................C-20

STRATEGY....................................................................................................C-21

TAG_DESC .................................................................................................... C-21

TEST_RW.......................................................................................................C-21

TRK_IN_D......................................................................................................C-21

TRK_SCALE..................................................................................................C-21

TRK_VAL ......................................................................................................C-21

UPDATE_EVT...............................................................................................C-22

Contents

National Instruments Corporation xi FieldPoint FP-3000 User Manual

WRITE_ALM..................................................................................................C-22

WRITE_LOCK................................................................................................C-22

WRITE_PRI....................................................................................................C-22

XD_SCALE.....................................................................................................C-22

Appendix D

Advanced Function Block Behavior

Cascade Initialization.....................................................................................................D-1

Parameter Connections for Cascade Initialization ..........................................D-1

Mode and Status Behavior during Cascade Initialization ...............................D-2

Remote Cascades.............................................................................................D-3

Bypassing Cascade Initialization.....................................................................D-4

Fault State and Mode Shedding.....................................................................................D-4

Fault State........................................................................................................D-4

Mode Shedding................................................................................................D-4

Appendix E

Specifications

Appendix F

Technical Support Resources

Glossary

Index

Figures

Figure 1-1. Fieldbus Network Setup........................................................................1-2

Figure 2-1. NI-FBUS Configuration Utility Dialog Box.........................................2-2

Figure 2-2. DD Info Dialog Box..............................................................................2-2

Figure 2-3. Import DD Dialog Box..........................................................................2-3

Figure 2-4. fbconf Dialog Box.................................................................................2-3

Figure 2-5. DIN Rail Clip ........................................................................................2-4

Figure 2-6. Mounting the FP-3000 onto a DIN Rail................................................2-5

Figure 2-7. Connecting Terminal Bases...................................................................2-6

Figure 2-8. Installing the Network Panel Mount Accessory....................................2-7

Figure 2-9. Mounting I/O Module to Terminal Base...............................................2-8

Figure 2-10. FP-3000 Power Connector Pinout.........................................................2-9

Figure 2-11. Fieldbus Connectors on the FP-3000 ....................................................2-11

Inhaltsverzeichnis

Andere National Instruments Netzwerkzubehör Handbücher

National Instruments

National Instruments FieldPoint FP-1000 Bedienungsanleitung

Beliebte Netzwerkzubehör Handbücher anderer Marken

Valcom

Valcom VIP-804 Bedienungsanleitung

SKUTCH

SKUTCH BA-1000 Produkthandbuch

QUNDIS

QUNDIS RNN5 Bedienungsanleitung

Asus

Asus AAEON FWS-2365 Bedienungsanleitung

Sophos

Sophos XG 85w Bedienungsanleitung

AMCI

AMCI RBE2-8 Bedienungsanleitung

Patton electronics

Patton electronics 2888 Bedienungsanleitung

Cradlepoint

Cradlepoint COR IBR1100/IBR1150 Bedienungsanleitung

Paradyne

Paradyne Hotwire 8620 Bedienungsanleitung

Infra Cool

Infra Cool F-1.3 Bedienungsanleitung

Edgewater Networks

Edgewater Networks 4300T Bedienungsanleitung

Edimax

Edimax SB-2200g Bedienungsanleitung

Extreme Networks

Extreme Networks Mogul-100 Bedienungsanleitung

Aaeon

Aaeon FWS-8500 Bedienungsanleitung

Panduit

Panduit Z11C Series Bedienungsanleitung

F5 BIG-IP 10000 Series Montageanleitung

ZyXEL Communications

ZyXEL Communications NMA1115 Bedienungsanleitung

Auerswald

Auerswald COMtrexx Business Bedienungsanleitung