Nauticam 86221 Bedienungsanleitung

Current as of 2018-10-23

Instruction Manual for

M67 Flip Holder/Double Flip Holder for

MWL-1

PN# 86221, #86222

FOREWORD

Thank you for your purchase of a NAUTICAM product.

At NAUTICAM, we pride ourselves in the ability to recognize the

requirements of professional as well as amateur underwater

photographers and fulfill them through the innovative designs of our

products. We strive to achieve a high level of user-friendliness by

allowing stress-free installation and easy operation of all important

functions of the camera.

Please read this manual carefully before using the product, this will

maximize its performance as well as its lifetime.

WARRANTY

All NAUTICAM Products are warranted against any material and

manufacturing defects for two years from the date of purchase for

consumer use. This warranty only applies to products purchased from

authorized NAUTICAM dealers and does not extend beyond the original

retail purchaser.

To return your product for service, please contact your regional

authorized service center(s). Please note that this warranty only applies

when the product is purchased in the territory where the service center

is located.

NAUTICAM does not hold responsibility for damage, of any nature, to

any equipment used with and/or placed within our products.

NAUTICAM accepts no liability for any loss of captured images or the

inability to capture images even if it is due to the malfunctioning of our

products.

Unauthorized modifications and/or repairs of our products will

automatically

Press the lever and flip the holder to the side then remove the

locking ring from the flip holder.

Align the two positioning screws on the back of the holder with

the slots on the front of the port.

The position of the flip holder can be changed by relocating the

two screws in the threaded holes around holder.

Fasten the holder by screwing the locking ring into the thread

on the front of the port.

---Continue on next page---

INSTALL TO THE PORT

Press

Current as of 2018-10-23

---Continue from front page---

CHANGING THE MOUNTING RING

A M67 mounting ring is supplied for directly mounting MWL-1

on the flip holder.

Follow below instruction to exchange the Bayonet Mounting

Ring of MWL-1 to M67 Mounting Ring in order to be securely

Remove the 7x screws from the back of the lens.

Remove the bayonet mounting ring of MWL-1. Note that there

are 4x small black cylindrical positioning pins. All 4 pins should

be remain in the back of the lens

Locate the 4 small sockets of the M67 mounting ring. Align with

the positioning pins on the MWL-1 and place it on top.

Secure the mounting ring by tightening the 7x screws

Fastening the MWL-1 tightly on M67 flip holder or double flip

holder. Please refer to MWL-1 to adjusting the lens hood

position

Remark: All Nauticam product manual will be changed to e-manual in end of

2018. Please download corresponding product manuals on Nauticam.com

website, or contact us for e-manuals.

Dieses Handbuch passt für folgende Modelle

Andere Nauticam Kamerazubehör Handbücher

Nauticam

Nauticam 16347 Bedienungsanleitung

Nauticam

Nauticam NA-EM1X Bedienungsanleitung

Nauticam

Nauticam NA-EM10III Bedienungsanleitung

Nauticam

Nauticam NA-TG6 Bedienungsanleitung

Nauticam

Nauticam 28137 Bedienungsanleitung

Nauticam

Nauticam 36167 Bedienungsanleitung

Nauticam

Nauticam Vacuum Valve II Bedienungsanleitung

Nauticam

Nauticam NA-XT3 Bedienungsanleitung

Nauticam

Nauticam NA-503-H Bedienungsanleitung

Nauticam

Nauticam 17954 Bedienungsanleitung

Nauticam

Nauticam NA-C70 Bedienungsanleitung

Nauticam

Nauticam 86223 Bedienungsanleitung

Nauticam

Nauticam M67 Bedienungsanleitung

Nauticam

Nauticam C65-F Bedienungsanleitung

Nauticam

Nauticam M67 Bedienungsanleitung

Nauticam

Nauticam 36060 Bedienungsanleitung

Nauticam

Nauticam NA-XZ1 Bedienungsanleitung

Nauticam

Nauticam NA-A7IV Bedienungsanleitung

Nauticam

Nauticam 16339 Bedienungsanleitung

Nauticam

Nauticam O825-Z Bedienungsanleitung

Nauticam

Nauticam NA-D7000V Bedienungsanleitung

Nauticam

Nauticam standard port base. Bedienungsanleitung

Nauticam

Nauticam 26306 Bedienungsanleitung

Nauticam

Nauticam NA-DP4 Bedienungsanleitung

Beliebte Kamerazubehör Handbücher anderer Marken

Viltrox

Viltrox EF-NEX Montageanleitung

Calumet

Calumet 7100 Series CK7114 Bedienungsanleitung

Ropox

Ropox 4Single Series Bedienungsanleitung

Cambo

Cambo Wide DS Digital Series Betriebsanleitung

Samsung

Samsung SHG-120 Bedienungsanleitung

Ryobi

Ryobi BPL-1820 Bedienungsanleitung

Aegis

Aegis ABL-36020P Bedienungsanleitung

Pentax

Pentax Data Back Fc Bedienungsanleitung

Fantasea

Fantasea EyeGrabber F Series Bedienungsanleitung

Honeywell

Honeywell HDZ20HD Bedienungsanleitung

EGO

EGO BA1400T Bedienungsanleitung

Sima

Sima SRW-62 Bedienungsanleitung

Shape

Shape A7SSMKIT Bedienungsanleitung

Slide Kamera

Slide Kamera HST-2 Bedienungsanleitung

Power works

Power works 2902613 Bedienungsanleitung

SES

SES SE-2047-2 Bedienungsanleitung

Olympus

Olympus PT-EP05L Bedienungsanleitung

Starlite

Starlite OctoDome nxt Bedienungsanleitung