NCR TPM 2.0 Security Chip Handbuch
KITINSTRUCTIONS
TPM2.0 Security Chip
Release 1.0
7607–K158
Issue A
i
The product described in this document is a licensed product of NCR Corporation.
NCR is a registered trademark of NCR Corporation. NCR RealPOS is a trademark of NCR Corporation in the United States and/or
other countries. Other product names mentioned in this publication may be trademarks or registered trademarks of their respective
companies and are hereby acknowledged.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of
HDMI Licensing LLC in the United States and other countries.
Where creation of derivative works, modifications or copies of this NCR copyrighted documentation is permitted under the terms
and conditions of an agreement you have with NCR, NCR's copyright notice must be included.
It is the policy of NCR Corporation (NCR) to improve products as new technology, components, software, and firmware become
available. NCR, therefore, reserves the right to change specifications without prior notice.
All features, functions, and operations described herein may not be marketed by NCR in all parts of the world. In some instances,
photographs are of equipment prototypes. Therefore, before using this document, consult with your NCR representative or NCR
office for information that is applicable and current.
To maintain the quality of our publications, we need your comments on the accuracy, clarity, organization, and value of this book.
Please use the link below to send your comments.
EMail: FD230036@ncr.com
Copyright © 2016
By NCR Corporation
Duluth, GA U.S.A.
All Rights Reserved
ii
Revision Record
Issue Date Remarks
ANov 2016 First Issue
TPM 2.0 Security Chip
Introduction
This kit provides a TPM2.0 Security Chip for the RealPOSXR7 Plus POS.
2 TPM 2.0 Security Chip
Installation Procedure
1. Lay the terminal face down on a flat surface.
Caution: Always use a soft material (cloth, foam) to protect the display screen
when placing the terminal face down.
2. Remove the Base Stand.
a. Remove the screws (2) that secure the Base Stand to the display.
b. Rotate the Base Stand upwards as shown and remove the Mounting Plate Studs
(2) from the openings in the Rear Cover.
TPM 2.0 Security Chip 3
3. Remove the Rear Cover assembly.
a. Remove the Cable Cover.
b. Loosen the captive screws (2) that secure the Rear Cover to the chassis.
c. Pivot the assembly as shown to remove it.
4 TPM 2.0 Security Chip
4. Connect the TPM Board to the Motherboard.
Inhaltsverzeichnis
Andere NCR Steuereinheit Handbücher
NCR
NCR 2-in-1 Sign-In Handbuch
NCR
NCR 7358-K580 Handbuch
NCR
NCR 7197 SII Bedienungsanleitung
NCR
NCR 7403-K131 Bedienungsanleitung
NCR
NCR 7703-K168 Bedienungsanleitung
NCR
NCR 7606-K132 Handbuch
NCR
NCR 7358-K705 Handbuch
NCR
NCR MSR Series Handbuch
NCR
NCR 7701-K134 Bedienungsanleitung
NCR
NCR K150 Betriebsanleitung
Beliebte Steuereinheit Handbücher anderer Marken
Festo
Festo Compact Performance CP-FB6-E Stücklistenhandbuch
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung
JS Automation
JS Automation MPC3034A Bedienungsanleitung
JAUDT
JAUDT SW GII 6406 Series Kurzanleitung
Spektrum
Spektrum Air Module System Bedienungsanleitung
BOC Edwards
BOC Edwards Q Series Bedienungsanleitung
