NEC 920 Bedienungsanleitung

TalkTime Max™ 920

Owner’s Manual

ATTENTION

Before Using the Phone:

It is necessary that you CHARGE your phone

battery fully before attempting to make or receive a call.

Battery Disposal:

DO NOT PLACE USED BATTERIES IN YOUR REGULAR

TRASH. THIS NICKEL-CADMIUM (Ni-Cd) BATTERY MUST

BE COLLECTED, RECYCLED OR DISPOSED OF IN AN

ENVIRONMENTALLY SOUND MANNER.

Battery Recommendations:

The NEC TalkTime MAX™ 920 cellular phone you have

purchased was designed to deliver quality performance and

provide you with years of use. In order to maintain optimum

performance, NEC recommends that only NEC Authentic

Accessories™ be used with the TalkTime phones.

Specifically, NEC recommends only the use of Nickel

Cadmium (NiCd) batteries with the TalkTime MAX™ 920

phone. Use of other batteries, such as Nickel Metal Hydride

(NiMH) may result in poor battery performance, and in some

cases, create a potential safety risk due to overheating of the

battery.

The incineration, landfilling or mixing of nickel-cadmium

(Ni-Cd) batteries with municipal solid waste stream is

PROHIBITED BY LAW in most areas.

Return this battery to a federal or state approved nickel-

cadmium (or “sealed lead”) battery recycler. This may be

where you purchased the battery or a local seller of

automotive batteries. In all states, call 1-800-822-8837,

except Minnesota if further disposal information is required.

In Minnesota, call 1-800-225-PRBA.

Contact local waste management officials for other

information regarding the environmentally sound collection,

recycling and disposal of this battery.

In-Vehicle Operation:

For In-Vehicle Operations, the phone battery must be

charged, since In-Vehicle Adapter Kits serve only as a trickle

battery charger.

IMPORTANT

READ THIS INFORMATION BEFORE USING

YOUR HAND-HELD PORTABLE CELLULAR

TELEPHONE

First introduced in 1984, the hand-held portable cellular

telephone is one of the most exciting and innovative

electronic products ever developed. With it you can stay in

contact with your office, your home, emergency services, and

others.

For the safe and efficient operation of your phone, observe

these guidelines.

Your cellular telephone is a radio transmitter and receiver.

When it is ON, it receives and also sends out radio frequency

(RF) energy. The phone operates in the frequency range of

824 MHz to 894 MHz and employs commonly used

frequency modulation (FM) techniques. When you use your

phone, the cellular system handling your call controls the

power level at which your phone transmits. The power level

can range from 0.006 of a watt to 0.6 of a watt.

Exposure to Radio Frequency Energy

In 1991 the Institute of Electrical and Electronics Engineers

(IEEE), and in 1992 the American National Standards

Institute (ANSI) updated the 1982 ANSI Standard for safety

levels with respect to human exposure to RF energy. Over

120 scientists, engineers, and physicians from universities,

government health agencies, and industry, after reviewing the

available body of research, developed this updated Standard.

In March, 1993, the Federal Communications Commission

(FCC) proposed the adoption of this updated Standard.

The design of your phone complies with this updated

Standard. Of course, if you want to limit RF exposure even

further than the updated ANSI Standard, you may choose to

control the duration of your calls and operate your phone in

the most power efficient manner.

Efficient Phone Operation

For your phone to operate at the lowest power level,

consistent with satisfactory call quality, please observe the

following guidelines:

iii

If your phone has an extendable antenna, extend it

fully. Some models allow you to place a call with the

antenna retracted. However, your phone operates more

efficiently with the antenna fully extended.

Hold the phone as you would any other telephone. While

speaking directly into the mouthpiece, position the antenna

up and over your shoulder. Do not hold the antenna when

the phone is “IN USE.” Holding the antenna affects call

quality and may cause the phone to operate at a higher

power level than needed.

Antenna Care and Replacement

Do not use the phone with a damaged antenna. If a

damaged antenna comes into contact with the skin, a minor

burn may result. Replace a damaged antenna immediately.

Consult your manual to see if you can change the antenna

yourself. If so, use only a manufacturer approved antenna.

Otherwise, take your phone to a qualified service center for

repair.

Use only the supplied or approved antenna. Non-approved

antennas, modifications, or attachments could impair call

quality, damage the phone, and violate FCC regulations.

Driving

Check the laws and regulations on the use of cellular

telephones in the areas where you drive. Always obey them.

Also, when using your phone while driving, please:

* give full attention to driving,

* use hands-free operation, if available, and

* pull off the road and park before making or answering

a call if driving conditions so require.

Electronic Devices

Most modern electronic equipment is shielded from RF

energy. However, RF energy from cellular telephones may

affect inadequately shielded electronic equipment.

RF energy may affect improperly installed or inadequately

shielded electronic operating and entertainment systems in

motor vehicles. Check with the manufacturer or its

representative to determine if these systems are adequately

shielded from external RF energy. You should also check

with the manufacturer of any equipment that has been added

to your vehicle.

Consult the manufacturer of any personal medical devices

(such as pacemakers, hearing aids, etc.) to determine if they

are adequately shielded from external RF energy.

Turn your phone OFF in health care facilities when

any regulations posted in the areas instruct you to do so.

Hospitals or health care facilities may be using equipment

that could be sensitive to external RF energy.

Aircraft

Turn your phone OFF before boarding any aircraft.

* Use it on the ground only with crew permission.

* Do not use it in the air.

To prevent possible interference with aircraft systems,

Federal Aviation Administration (FAA) regulations require you

to have permission from a crew member to use your phone

while the plane is on the ground. To prevent interference

with cellular systems, FCC regulations prohibit using your

phone while the plane is in the air.

Children

Do not allow children to play with your phone. It is not a toy.

Children could hurt themselves or others (by poking

themselves or others in the eye with the antenna for

example). Children also could damage the phone, or make

calls that increase your telephone bills.

Blasting Areas

To avoid interfering with blasting operations, turn your unit

OFF when in a “blasting area” or in areas posted:

“Turn off two-way radio.”

Construction crews often use remote control RF devices to

set off explosives.

Air Bags

An air bag inflates with great force. DO NOT place objects,

including both installed or portable wireless equipment, in the

area over the air bag or in the bag deployment area. If in-

vehicle wireless equipment is improperly installed and the air

bag inflates, serious injury could result.

Potentially Explosive Atmospheres

Turn your phone OFF when in any area with a potentially

explosive atmosphere. It is rare, but your phone or its

accessories could generate sparks. Sparks in such areas

could cause an explosion or fire resulting in bodily injury or

even death.

Areas with a potentially explosive atmosphere are often, but

not always, clearly marked. They include fueling areas such

as gas stations; below deck on boats; fuel or chemical

transfer or storage facilities; areas where the air contains

chemicals or particles, such as grain, dust, or metal powders;

and any other area where you would normally be advised to

turn off your vehicle engine.

Do not transport or store flammable gas, liquid, or explosives

in the compartment of your vehicle that contains your phone

or accessories.

Vehicles using liquefied petroleum gas (such as propane or

butane) must comply with the National Fire Protection

Standard (NFPA-58). For a copy of this standard, contact

the National Fire Protection Association, One Batterymarch

Park, Quincy, MA 02269, Attn: Publication Sales Division.

Pacemaker/ICDs

Research sponsored by the Wireless Technology Research,

LLC (“WTR”), indicates that some wireless telephones cause

interference with pacemakers. Accordingly, NEC America

endorses the following recommendations issued by the WTR:

Wireless phones should be kept at a safe distance from a

pacemaker. Existing data indicate that the greater the

distance between a pacemaker and a wireless phone, the

less risk of interference. These data further indicate that six

inches is the proper separation distance for minimal risk.

Practical steps to achieve this separation distance include:

o The wireless telephone should not be placed over the

pacemaker, such as in a breast pocket, when it is in the

“ON” position. (A phone is “ON” when power is being

supplied to the telephone by the battery.)

o The phone should be used at the ear opposite the

pacemaker.

Note: There is nothing in the comprehensive data to

suggest that bystanders with pacemakers would be at risk of

interference from others who are using wireless phones.

CONTROLS AND FEATURES

Antenna

Earpiece Receiver

Liquid Crystal

Display

Call Control Keys

Function Keys

Dialing

Indicators

Symbol Keys/

Scroll Keys

Volume Key

Microphone

Battery Locking Catch

Sounder/Speaker

Rechargeable

Battery Pack

Battery Charging

Jack

External Connector

Battery

Charging

Contacts

-1-

CONTENTS

Getting Started 2

Installing and Removing the Battery 2

The Battery Charge Indicator 3

Charging and Recharging the Battery 3

Display Indicators 4

Quick Reference Guide 4,5

Operation of the Phone 6

Turning On or Off 6

Placing a Call 6

Receiving a Call 7

Signal Strength 7

Volume Key 7

Last Number Redial 8

Speed Dialing 8

The Memory 8

Storing Information 9

Recalling A Number From Memory 9

Editing Numbers 9

Displaying “Hidden” Numbers 10

Deleting Information from Memory 10

Scanning for a Number 10

Scratchpad 11

Displaying Your Own Phone Number 11

Features 11

NAM Select 11

Locking/Unlocking the Phone 11

Length of Your Calls 13

Resetting the Call Timers 14

Backlighting 15

Setting the Ringing Volume 15

Using the Phone on Two Networks 15

Pause Dialing 16

Roaming(System Select) 16

SID Management 18

DTMF Tone 18

Mute 19

Low Battery Alarm 20

Error Tone 20

Self Diagnostic Check 20

NAM Programming 20

Temporary Lock Code Set 21

One-Touch Dialing 21

Hands-Free 22

Caller Line Identification 22

Voice Messaging Service 23

Voice Mail Message Indication 23

Limited Warranty 24

Troubleshooting 26

Technical Information 27

Care and Maintenance 27

NEC Service Support 28

-2-

GETTING STARTED

Your phone is powered by a rechargeable battery.

A new battery must be fully charged

before being used for the first time.

If left unused, a fully charged battery will discharge itself in

about a month. Store batteries uncharged in a cool, dark,

and dry place.

The battery pack is a sealed unit with no serviceable parts

inside. Do not attempt to open the case.

WARNING: Use only NEC approved batteries, antennas,

and chargers. The use of any other types will invalidate

any approval or warranty applying to the telephone.

INSTALLING AND REMOVING THE BATTERY

To Install the Battery:

1. Insert the bottom of the battery into

the base of the phone.

2. Fasten it to the phone by

pressing slightly downward on

the battery until the locking

catch snaps into place.

3. Make sure the battery is properly

installed.

To Remove the Battery:

Remember to switch the power off before removing

the battery.

1. Slide the locking latch located at the top of the battery

upward and gently pull the battery away from the phone.

➁

①

THE BATTERY CHARGE INDICATOR

The Battery Charge Indicator can be

accessed by pressing [FCN] [8] keys

after power has been applied to the

phone. The display screen indicates the

battery charge level ranging from [o] to

[oooo]. [o] representing low battery and

[oooo] representing full battery.

CHARGING AND RECHARGING THE BATTERY

Charging the battery can be accomplished two ways.

(A) By direct connect of the AC Adapter to the charging jack

of the phone.

(B) By placing the phone into the charging stand.

(A)

1. Plug the AC Adapter into a standard

110V AC outlet.

2. Insert the DC plug into the phones

battery jack.

3. With PWR on display will show:

(B)

1. Plug the AC Adapter into a standard 110V AC outlet.

2. Plug the Charging Stand into the Adapter.

Note: Initial charging and recharging of the battery

usually takes approximately 10 hours.

A new battery must be fully charged

before being used for the first time.

Batteries last longer and perform better if allowed to

discharge fully at least once a week. You can do this by

leaving the phone switched on overnight, or until the

message RECHARGE BATTERY is displayed and the phone

shuts itself off.

NOTE: If the battery is too hot or cold, charging will be

interrupted until the battery reaches a normal temperature.

-3-

PWR

b a t t

o o o o

PWR

o o o o

C H A r g i n g

(B)

(A)

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Beliebte Handy Handbücher anderer Marken

Zte

Zte BLADE A520 Bedienungsanleitung

Nokia

Nokia Lumia 620 Bedienungsanleitung

Blackbe;rry

Blackbe;rry KEYone Bedienungsanleitung

Bea-fon

Bea-fon X5 Premium Bedienungsanleitung

Blackbe;rry

Blackbe;rry 8707 Series Bedienungsanleitung

Blackbe;rry

Blackbe;rry Storm Betriebsanleitung

LG LM-X420QN Bedienungsanleitung

LifeWatch

LifeWatch V Bedienungsanleitung

Bea-fon

Bea-fon SILVER LINE SL860 Bedienungsanleitung

IKI Mobile

IKI Mobile KF4.5i Bedienungsanleitung

Hitech

Hitech HT-850 Bedienungsanleitung

Yezz

Yezz Fashion F10 Bedienungsanleitung

Point Mobile

Point Mobile PM60 Bedienungsanleitung

Blackbe;rry

Blackbe;rry Q10 Bedienungsanleitung

Blackbe;rry

Blackbe;rry Bold 9900 Bedienungsanleitung

Blackbe;rry

Blackbe;rry STORM 9500 - VERSION 5.0 Bedienungsanleitung

LG LM-K420EMW Bedienungsanleitung

ISAFE MOBILE

ISAFE MOBILE IS655.2 Bedienungsanleitung