NEC SX-Aurora TSUBA300-8ASA Bedienungsanleitung

SX-Aurora TSUBASA

A300-8

USER'S GUIDE

Revision 1.0

SX-Aurora TSUBASA

NEC

The information in this User’s Guidehas beencarefully reviewed and is believed to be accurate. The vendor assumes no

responsibility for any inaccuracies that may be contained in this document, and makes no commitment to update or to

keep current the information in this guide, or to notify any person or organization of the updates.

Please Note: For the most up-to-date version of this guide, please see our website at

http://www.nec.com/en/global/prod/hpc/aurora/document/

NEC Corporation (“NEC”) reserves the right to make changes to the product described in this guide at any time and

without notice. This product, including software and documentation, is the property of NEC and/ or its licensors, and is

supplied only under a license. Any use or reproduction of this product is not allowed, except as expressly permitted by

the terms of said license.

IN NO EVENT WILL NEC CORPORATION BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVEOR CONSEQUENTIALDAMAGESARISINGFROMTHEUSEORINABILITYTOUSETHISPRODUCT

OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, NEC

CORPORATION SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED

WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR

RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.

The products sold by NEC are not intended for and will not be used in life support systems, medical equipment, nuclear

facilities or systems, aircraft, aircraft devices, aircraft/emergency communication devices or other critical systems

whose failure to perform be reasonably expected to result in significant injury or loss of life or catastrophic property

damage. Accordingly, NEC disclaims any and all liability, and should buyer use or sell such products for use in such

ultra-hazardous applications, it does so entirely at its own risk. Furthermore, buyer agrees to fully indemnify, defend

and hold NEC harmless for and against any and all claims, demands, actions, litigation, and proceedings of any kind

arising out of or related to such ultra-hazardous use or sale.

Guide Revision 1.0

Release Date: April 23, 2018

Unless you request and receive written permission from NEC Corporation, you may not copy any part of this document.

Information in this document is subject to change without notice. Other products and companies referred to herein are

trademarks or registered trademarks of their respective companies or mark holders.

SX-Aurora TSUBASA A300-8 User's Guide

Preface

About this Guide

This Guide is written for professional system integrators and PC technicians. It provides

information for the installation and use of the SX-Aurora TSUBASA A300-8. Installation and

maintenance should be performed by experienced technicians only.

Please refer to the A300-8 server specifications page on our website for updates on

supported memory, processors and operating systems

(http://www.nec.com/en/global/prod/hpc/aurora/document/).

Notes

For your system to work properly, please follow the links below to download all necessary

drivers/utilities and the user’s guide for your server.

•

NEC product manuals: http://www.nec.com/en/global/prod/hpc/aurora/document/

•

Product safety info:

http://www.nec.com/en/global/prod/hpc/aurora/document/safety_information.pdf

This guidemay be periodically updated without notice. Please check the NEC website for

possible updates to the guide revision level.

Warnings

Special attention should be given to the following symbols used in this guide.

Warning! Indicates important information given to prevent equipment/property damage

or personal injury.

Warning! Indicates high voltage may be encountered when performing a procedure.

Preface

Contents

Chapter 1 Introduction........................................................................................................................5

1.1 Overview.....................................................................................................................................................5

1.2 Unpacking the System................................................................................................................................5

1.3 System Features.........................................................................................................................................6

1.4 Server Chassis Features............................................................................................................................7

Control Panel.............................................................................................................................................7

Front Features...........................................................................................................................................9

Rear Features..........................................................................................................................................10

1.5 System Block Diagram..............................................................................................................................11

1.6 Ports and Headers....................................................................................................................................12

Rear I/O Ports..........................................................................................................................................12

1.7 LED Indicators ..........................................................................................................................................14

Chapter 2 Server Installation............................................................................................................15

2.1 Overview...................................................................................................................................................15

2.2 Preparing for Setup..................................................................................................................................15

Choosing a Setup Location.....................................................................................................................15

Rack Precautions.....................................................................................................................................15

Server Precautions ..................................................................................................................................16

Rack Mounting Considerations ................................................................................................................16

2.3 Procedure for Rack Mounting...................................................................................................................18

Identifying the Inner Rack Rails ..............................................................................................................18

Installing the Inner Rails on the Chassis ..................................................................................................19

Installing the Outer Rails onto the Rack...................................................................................................20

Installing the Chassis into a Rack ............................................................................................................21

Removing the Chassis from the Rack......................................................................................................22

Chapter 3 Maintenance and BIOS Setting.......................................................................................23

3.1 Overview...................................................................................................................................................23

Appendix A BIOS Error Codes.........................................................................................................24

Appendix B Standardized Warning Statements for AC Systems..................................................25

SX-AuroraTSUBASA A300-8 User's Guide

Chapter 1

Introduction

1.1 Overview

ThischapterprovidesabriefoutlineofthefunctionsandfeaturesoftheSX-AuroraTSUBASAA300-8.

1.2 Unpacking the System

Inspect the box the SX-Aurora TSUBASA A300-8 was shipped in and note if it was damaged

in any way. If any equipment appears damaged, please file a damage claim with the carrier

who delivered it.

Decide on a suitable location for the rack unit that will hold the server. It should be situated in

a clean, dust-free area that is well ventilated. Avoid areas where heat, electrical noise and

electromagnetic fields are generated. It will also require a grounded AC power outlet nearby.

Be sure to read the precautions and considerations noted in Appendix B.

Chapter 1: Introduction

1.3 System Features

The following table provides you with an overview of the main features of the SX-Aurora

TSUBASA A300-8.

System Features

Motherboard

Supermicro X11DPG-O

Chassis

Supermicro SC418GTS-R4000BP

CPU

Supports dual Intel Xeon 6148/6126/4108 series (Socket P0-LGA3647) processors

Socket Type

Socket P0-LGA3647

Memory

96GB or 192GB

Chipset

Intel PCH C622 chipset

PCIe Cards

Up to Eight Vector Engine 1.0 cards

Up to two InfiniBand HCA cards

Hard Drives

one fixed 2.5" internal drive

Power

Four 2000W power supplies

Form Factor

4U Rack mount server

Dimensions

(WxHxD) 17.2 x 1.7 x 23.5 in. (437 x 43 x 597 mm)

Host Server

A300-8-VH

SX-AuroraTSUBASA A300-8 User's Guide

1.4 Server Chassis Features

Control Panel

There are two buttons located on the front of the chassis: a power on/off button and a reset

button. In addition there are six LEDs. The locations of these buttons and LEDs on the control

panel are described below. See Chapter 4 for details on the control panel connections.

Figure 1-1. Control Panel View

Control Panel Features

Item

Feature

Description

Power Button

The main power switch applies or removes primary power from the power

supply to the server but maintains standby power. Toperform most maintenance

tasks, unplug the system to remove all power.

Reset Button

The reset button is used to reboot the system.

Power LED

Indicates power is being supplied to the system power supply units. This LED is

illuminated when the system is operating normally.

HDD LED

Indicates IDE channel activity. SAS2/SATA drive and/or DVD-ROM drive activity

when flashing.

NIC1 LED

Indicates network activity on GLAN2 when flashing.

NIC2 LED

Indicates network activity on GLAN1 when flashing.

Universal Information LED

See the following table for the status shown by this LED.

Power Fail LED

Indicates a power supply module has failed.

Chapter 1: Introduction

Universal Information LED

Status

Description

Continuously on and red

An overheat condition has occurred (this may be caused by cable

congestion).

Blinking red (1 Hz)

Fan failure: check for an inoperative fan.

Blinking red (0.25 Hz)

Power failure: check for an inoperative power supply.

Solid blue

Local UID has been activated. Use this function to locate the server in a rack

environment.

Blinking blue (300 msec)

Remote UID has been activated. Use this function to activate the server from

a remote location.

SX-AuroraTSUBASA A300-8 User's Guide

Front Features

The chassis is a 4U rack mount chassis. See the illustration below for the features included

on the front of the chassis.

1 1 1 1 1

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Figure 1-2. Chassis Front View

Front Chassis Features

Item Feature Description

1 Hot-swap drive bays (24) Drive bays for hot-swap 2.5" drive carriers

2 Control Panel Control panel for the server. See the Control Panel section above for details.

SX-Aurora TSUBASA

NEC

Chapter 1: Introduction

Rear Features

The illustration below shows the features included on the rear of the chassis.

1 1 2 1 1

Figure 1-3. Chassis Rear View

Rear Chassis Features

Item Feature Description

1 Power Supplies Two hot-swappable redundant power supplies are available for use.

2 Rear I/O ports See Motherboard Layout below for details on the rear I/O ports.

Up to twelve (12) slots are provided in the chassis rear for accessing PCI-E

3 Rear PCI-E Expansion Slot Expansion cards using four riser cards.

Inhaltsverzeichnis

Andere NEC Computerhardware Handbücher

NEC

NEC N8141-75F Benutzerhandbuch

NEC

NEC N8140-817 Bedienungsanleitung

NEC

NEC IE-V850ES-G1 Bedienungsanleitung

NEC

NEC NE3304-132 Benutzerhandbuch

NEC

NEC N8105-55 Bedienungsanleitung

NEC

NEC N8151-53 Bedienungsanleitung

NEC

NEC N8151-121 Bedienungsanleitung

NEC

NEC IE-784937-NS-EM1 Bedienungsanleitung

NEC

NEC N8146-91 Bedienungsanleitung

NEC

NEC EP-753304DU-R Bedienungsanleitung

NEC

NEC IE-784225-NS-EM1 Bedienungsanleitung

NEC

NEC IE-789860-NS-EM1 Bedienungsanleitung

NEC

NEC NEC Express5800 Series Bedienungsanleitung

NEC

NEC NEAX 2400 Bedienungsanleitung

NEC

NEC MultiSync M Series Bedienungsanleitung

NEC

NEC Express 5800 120Eg Bedienungsanleitung

NEC

NEC N8105-53 Bedienungsanleitung

NEC

NEC N8405-019 Bedienungsanleitung

NEC

NEC 455-01593-000 Bedienungsanleitung

NEC

NEC N8154-25 Bedienungsanleitung

NEC

NEC NEC PD78081(A) Bedienungsanleitung

NEC

NEC NEAX 2400 Bedienungsanleitung

NEC

NEC Release-it Bedienungsanleitung

NEC

NEC NL10276BC24-21 Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

AMD

AMD Phenom II Betriebshandbuch

Intel

Intel NUC 12 Pro Bedienungsanleitung

dbx

dbx Zone Pro 1260 Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung