NEC ML440 Bedienungsanleitung
Page 1 of 7
Page 1 of 7 APT 1.0
SV8100 Cheat Sheet
The NEC ML440 consists of the AP20 access point and the ML440 handset shown below.
The AP20 is powered by POE 802.3af) ONLY.
Some Quick ML440 Facts
•Maximum number of handsets is 200.
•Maximum number of AP’s is 40.
•Seamless Roaming between AP’s is supported.
•Single AP site supports up to 10 simultaneous calls.
A multi AP site supports up to 8 simultaneous calls.
•Voice Announce is NOT supported there is no alert
Tone).
•ML440 uses NEC i-SIP so each handset requires one IP
Phone license license 5101).
•ML440 only supports G711.
•ML440 does not work with UCB or Desktop Suite/Attendant.
•Maximum handsets that can register to one AP20 is 30.
•AP20 can be defaulted by depressing the small button on the rear side until the Status light turns red.
NEC
ML 440
NEC
.
.
.
1
2
ABC
3
DEF
4
GHI
5
JKL
6
MNO
7
PQRS
8
TUV
9
WXYZ
Menu
Key
Multi-
function keys
1~4 assigned
in Prog15-07
Speaker
Phone
Status La p
See chart on
page X for
description
Soft Keys
Not
Progra able
On
Hook
Off
Hook
NEC
Page 2 of 7
Page 2 of 7 APT 1.0
SV8100 Cheat Sheet
1. From default an IP address can only be assigned to the AP20 via DHCP. This can be done with the built
in DHCP server on the SV8100 10-13-01), via the customers DHCP server, or by using a 3
rd
party
application such at Tftpd32. Once the AP20 has an IP address the status light will be a steady green.
2. Take a ML440 handset and press the key followed by * 4 7 * you should then see something like
the following…..
Take note of the IP address and access this from a browser on the same network.
3. Once connected you will be prompted for a login and password.
The default is “ad in” and “ad in”. The user name and password
can be changed from the “Web Security” option within the AP20.
4. You will be taken to the Home/Status screen. Select “Manage ent” from the side menu.
Programming
.
.
.
IP Search
MAC: 00:08:7B:07:E1:13
IP: 172.16.1.101
Base Station Name allows you to
label the individual AP’s for ease in
location and troubleshooting.
The other options on this page
are for trouble shooting only
and can be left at default.
Page 3 of 7
Page 3 of 7 APT 1.0
SV8100 Cheat Sheet
5. From the side menu select the option “Servers” to add the SV8100 IP Address.
6. Select “Extension” from the side Menu then the “Add Extension” link.
7.
Enter the IP address fro
10-12-09 along with :5080.
The Registration ti e(s)
should be left at default.
DTMF Signaling should be set
to SIP INFO to follow i -SIP
signaling.
The Codec Priority ust be
left at G711U as this is all that
is supp
orted at this ti e.
Make sure the ext nu bers are
assigned in the SV8100 (11-02).
The syste will auto atically
allocate the ext nu bers to the
handsets, starting with the first
un-equipped port above the port
nu ber assigned in 10-46-10
(default =1).
Note: You ust have an ME50
installed to use ports 64 and
above. Each handset ALSO uses a
port license as well as an IP
station license
Adding a Station (Plug And Play)
If the SV8100 is set to Plug
and Play in 10-46-01, no
entries are needed in the
“Add extension” boxes.
Si ply click the “Save”
button.
Page 4 of 7
Page 4 of 7 APT 1.0
SV8100 Cheat Sheet
8.
After selecting “Register Handsets s)” take the first handset and press the “Menu” button.
Press “Down” to the icon and select “Enter”.
9. The icon will be highlighted. Select “Enter”. You will then be prompted for the
Enter the default “Access code” of “ 0 0 0 0” followed by the left Soft Key directly below “Ok”.
10. After a few seconds the handset display will change to the station name 15-01-01) directly above the
ext number 11-02-01).
11. Using 20-06 assign the ML440 handset extensions to their own unique Class of Service for all Night
Modes utilized. E.g. COS 2 for all modes.
Once saved check the box and
then select “Register Handset(s)
.
.
.
Up
Down
Left Right
Enter
Access cod
e
ML440 does NOT support intercom Voice Call so this
feature must be disabled.
a. First at all ML440 stations dial the access
code to force intercom ringing default 723
prog 11-11-16)
b. For the new Class Of Service the ML440
extensions have been assigned, enable
20-08-11 to stop callers from changing the
ringing ML440 to Voice Call.
c. For the new Class Of Service the ML440
extensions have been assigned, disable
20-09-05 and this will prevent the ML440
user from dialing the Voice Call access code
default
721
, prog
11
-
11
-
15
)
Page 5 of 7
Page 5 of 7 APT 1.0
SV8100 Cheat Sheet
12. Some systems may already be configured for Manual or Automatic Login. If this is the case the ML440
sets can be assigned with the following procedure.
Within PCPro go to Programming, Unregistered Phones, IP Phone List… and select the ML440
extensions you intend to bring online.
13.
14.
Adding a Station (Manual/Automatic)
Within PCPro go to Progra ing,
Unregistered Phones, IP Phone List… and
select the ML440 extensions you intend to
bring online.
Go to 15-05-27 and assign a unique Personal ID
Index to each of the extension.
In 84-22 assign a User Id and
Password for each of the
personal ID Index numbers
assigned in step 13.
Page 6 of 7
Page 6 of 7 APT 1.0
SV8100 Cheat Sheet
15.
16.
17.Finally follow steps 8 through 11 on page 4 of this doc to complete bringing the handset on line.
Additional Handset Programming
With the phone online programming of the handset is like any other deskset. The device can have key programming for
up to 16 keys but only the first 4 can be accessed.
As the station is in another COS do not forget to enable the other stable options such as receiving Caller ID (20-09-02)
and Sending caller ID (20-08-13).
Browse into the AP20 and perform steps
1~5 pages 2 and 3 of this doc). Then select
Network from the side menu to access the
Network Settings.
Go to the SIP/RTP Settings and change SIP
registration ode: to Static
Go back to the Ho e/Status page and
select the Reboot button at the bottom
left side of the screen. Allow the AP20 to
reboot and come back online.
After logging back into the AP20 select
the Extensions option from the side
menu and the click on Add extension.
Enter the extension number along with
the User Na e and Password
previously assigned in 84-22 in step 14
Page 7 of 7
Page 7 of 7 APT 1.0
SV8100 Cheat Sheet
Most installations will require additional AP20’s to provide the wireless coverage of the customer’s working
area. Each area the AP20 covers is called a “Cell”. Each cell must overlap another cell so that the calls in
progress can be seamlessly passed between AP20’s as the handset moves between covered areas.
In a Multi-Cell layout 1 AP20 acts as the primary timing/synchronization source for the entire WL440 network.
Other AP20’s overlap the primary AP20 at different levels. A direct overlap with the primary would be level 1.
An overlap into a level 1 cell would be a level 2 and so on. See the diagram below.
Multi Cell Installation
NEC
NEC
NEC
NEC
NEC
Primary AP
Level 1 AP
Level 1 AP
Level 2
AP
Level 3
AP
Primary
Level 1
Level 2
Level 3
Andere Handbücher für ML440
2
Inhaltsverzeichnis
Andere NEC IP-Telefon Handbücher
NEC
NEC UNIVERGE Aspire UX Montageanleitung
NEC
NEC Univerge SV9300 Bedienungsanleitung
NEC
NEC Univerge SV9100 Bedienungsanleitung
NEC
NEC Dterm Series i Bedienungsanleitung
NEC
NEC UNIVERGE GT890 Bedienungsanleitung
NEC
NEC Univerge DT820 Bedienungsanleitung
NEC
NEC DT750 Bedienungsanleitung
NEC
NEC Univerge DT820 Referenzhandbuch
NEC
NEC GT200 Bedienungsanleitung
NEC
NEC Univerge SV8100 Bedienungsanleitung
NEC
NEC UNIVERGE MH240 Bedienungsanleitung
NEC
NEC UNIVERGE MH240 Bedienungsanleitung
NEC
NEC Univerge SV8100 Bedienungsanleitung
NEC
NEC DT330 Referenzhandbuch
NEC
NEC G266 Bedienungsanleitung
NEC
NEC UX5000 Bedienungsanleitung
NEC
NEC Univerge SV8100 Bedienungsanleitung
NEC
NEC UNIVERGE SL2100 Gebrauchsanweisung
NEC
NEC Univerge MH250 Bedienungsanleitung
NEC
NEC UNIVERGE SV9100 DT820 Bedienungsanleitung
