NEC E461 Bedienungsanleitung

User’s Manual

E461

E551

English-1

www.necdisplay.com

Index

Precautions And Reminders ..............................................................English-1

Important Safety Instructions .............................................................English-2

Safety Instructions .............................................................................English-4

Important Information ........................................................................English-5

Declaration Of Conformity .................................................................English-7

Preparation ........................................................................................English-9

Preparing Your LCD Display For Wall Mounting .....................English-9

Place The Display On A Solid Surface ....................................English-9

Antenna Connection ..............................................................English-10

Battery Installation and Replacement....................................English-10

Connect To The Power Source .............................................English-11

Power On/Off Your New LCD Display ...................................English-11

Source Connection Guide .....................................................English-12

Operating Instructions .....................................................................English-13

Using The Side Panel Controls .............................................English-13

Using The Remote Control ....................................................English-14

Picture Format for Each Input Source ...................................English-15

Navigating The On-Screen Menu ....................................................English-16

Video Menu ...........................................................................English-16

Audio Menu ...........................................................................English-17

Setup Menu ...........................................................................English-17

Channel Menu .......................................................................English-20

Multimedia .............................................................................English-20

Tips ..................................................................................................English-21

Care Of The Screen ..............................................................English-21

Mobile Telephone Warning ...................................................English-21

End Of Life Directives............................................................English-21

License Notice and Trademark Acknowledgement ...............English-21

Product Specification .......................................................................English-22

Before Calling Service .....................................................................English-24

Glossary ..........................................................................................English-25

Limited Warranty .............................................................................English-26

References ......................................................................................English-27

English-1

English

Precautions And Reminders

Do not place the display

in conned spaces or in a

box when in use. Maintain

ample ventilation for the

display when in use.

Do not open the display

cabinet. Call a NEC certied

service personnel for any

internal service needed

for your display.

Keep the display away

from direct sunlight, dust,

humidity, and smoke.

Unplug immediately if any

foreign object is put in the

display or if the display

falls.

Unplug immediately

if there is a display

malfunction such as a

loss of audio/video, the

presence of smoke, or a

bad odor coming from the

display.

Unplug the AC cord from

the AC outlet before

cleaning. Do not use

liquid cleaners or aerosol

cleaners to clean the

display.

Do not place the display

near water such as a

bathtub, washbasin,

sink, laundry tub,

swimming pool, or a damp

basement.

Do not cover or block

any vents or openings.

Inadequate ventilation

may shorten the life of

the display and cause

overheating.

Place the unit on a sturdy,

even surface. Do not insert any foreign

objects into the display

cabinet.

Unplug the power cord

from the outlet when

the display is not in use

for long periods of time

(days).

Notice for Remote Controller

Avoid Liquids

789

Avoid Aerosol Cleaners

789

Avoid Dropping

123

789

English-2

English-3

Important Safety Instructions

Read before operating equipment

Follow all warnings and instructions marked on this display.

1. Read and keep these instructions.

2. Obey all warnings.

3. Follow all instructions.

4. Do not use equipment near water.

5. Clean with dry cloth.

6. Do not block any of the ventilation areas. Install in accordance with the

manufacturer’s instructions.

7. Do not install near heat sources, including radiators, heat registers,

stoves, or any other apparatus that creates heat.

8. Do not alter the safety purpose of the polarized or grounding type

plug. The polarized plug has two blades, one wider than the other. A

grounding type plug has two blades and a grounding prong. The wide

blade or the third prong on each plug type is provided for your safety. If

the provided plug does not t into an outlet, consult an electrician.

9. Protect the power cord from being stepped on or pinched. Pay close

attention to the connections at the wall, and the point where the cord

exits from the display.

10. Only use the attachments/accessories as indicated by the manufacturer.

11. Use only with the cart, stand, tripod, bracket, or table as instructed

by the manufacturer or sold with the device. When a cart is used, be

cautious of mishaps that cause injury.

S3125A

12. Unplug during lightning storms or when idle for long periods of time.

13. Refer all service issues to a qualied NEC technician. Service may be

necessary when the display is damaged in any way, including harm to

the power cord and plug, if liquid touches the display, if the display is

dropped, or if the display does not operate properly.

14. The display complies with the recommended safety standards for

stability. Do not excessively put force on the front or top of the cabinet.

This could cause the product to tip over and cause damage and/or

personal injury.

15. Follow instructions for wall, shelf or ceiling mounting as recommended

by the manufacturer.

16. An outdoor antenna should not be located near overhead power lines or

any electrical circuits.

17. If an outside antenna is connected to the receiver, conrm that the

English-2

English-3

English

antenna system is grounded to protect against voltage surges and built

up static charges. Section 810 of the National Electric Code, ANSI/NFPA

No. 70-1984, provides information with respect to proper grounding

for the mast and supporting structure, grounding of the lead-in wire

to an antenna discharge unit, size of grounding connectors, location

of antenna discharge unit, connection to grounding electrodes and

requirements for the grounding electrode.

NOTE: To the display system installer: This reminder is provided to call

attention to Article 820-44 of the National Electric Code that provides

guidelines for proper grounding and, in particular, specifies that the cable

ground shall be connected to the grounding system of the facility, as

reasonably close to the point of cable entry as possible

Power source

This LCD display operates on 120 volts 60 Hz, AC current. Insert the power

cord into a 120 volts 60 Hz outlet. The mains plug is used as the disconnect

device and shall remain readily operable.

To prevent electric shock from the display, do not use with an extension cord,

receptacle, or other outlet unless the blades and ground terminal can be fully

inserted to prevent blade exposure.

Never connect the LCD display to 50 Hz, direct current, or anything other than

the specified voltage.

CAUTION: Never remove the back cover of the LCD display as this can

expose you to very high voltages and other hazards. If the display does not

operate properly, unplug the LCD display and call your authorized dealer or

service center.

Adjust only those controls that are covered in the instructions, as improper

changes or modifications not expressly approved by NEC could void the

user’s warranty.

English-4

English-5

Safety Instructions

FCC STATEMENT

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rule. These limits are

designed to provide reasonable protection against harmful interference in

a residential installation. This equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in accordance with

these instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off

and on, the user is encourage to try to correct the interference by one or more

of the following measures:

1. Reorient or relocate the receiving antenna.

2. Increase the separation between the equipment and receiver.

3. Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

4. Consult the dealer or an experienced radio/display technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to

the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including

interference that may cause undesired operation.

FCC CAUTION

To assure continued compliance and possible undesirable interference, ferrite

cores may be used when connecting this LCD display to video equipment;

and maintain at least 400mm spacing to other peripheral device.

CANADIAN NOTICE

This Class B digital apparatus complies with Canadian ICES-003

English-4

English-5

English

Important Information

WARNING

TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT

TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT’S POLARIZED

PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS

UNLESS THE PRONGS CAN BE FULLY INSERTED.

REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH

VOLTAGE COMPONENTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE

POWER CORD IS UNPLUGGED FROM WALL SOCKET.

TO FULLY DISENGAGE THE POWER TO THE UNIT,

PLEASE DISCONNECT THE POWER CORD FROM THE AC

OUTLET. DO NOT REMOVE COVER (OR BACK). NO USER

SERVICEABLE PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

This symbol warns user that uninsulated voltage within the

unit may have sufficient magnitude to cause electric shock.

Therefore, it is dangerous to make any kind of contact with any

part inside this unit.

This symbol alerts the user that important literature concerning

the operation and maintenance of this unit has been included.

Therefore, it should be read carefully in order to avoid any

problems.

English-6

English-7

CAUTION: Please use the power cord provided with this display in

accordance with the table below. If a power cord is not supplied with this

equipment, please contact your supplier.

Plug Type North America

Plug Shape

Region U.S.A./Canada

Voltage AC 120 V

Apparatus shall not be exposed to dripping, splashing or any objects filled with

liquids.

Batteries installed warning

Caution - Danger of explosion if batteries are incorrectly replaced. Replace

only with the same or equivalent type. The batteries shall not be exposed to

excessive heat without risk of explosion.

English-6

English-7

English

Declaration Of Conformity

This device complies with Part 15 of FCC Rules. Operation is subject to the

following two conditions. (1) This device may not cause harmful interference,

and (2) this device must accept any interference received, including

interference that may cause undesired operation.

U.S. Responsible Party: NEC Display Solutions of America, Inc.

Address: 500 Park Boulevard, Suite 1100

Itasca, Illinois 60143

Tel. No.: (630) 467-3000

Type of Product: Display Monitor

Equipment Classification: Class B Peripheral

Model: E461

E551

We hereby declare that the equipment specied above

conforms to the technical standards as specied in the FCC Rules.

Canadian Department of Communications Compliance Statement

DOC: This Class B digital apparatus meets all requirements of the Canadian

Interference-Causing Equipment Regulations.

C-UL: Bears the C-UL Mark and is in compliance with Canadian Safety

Regulations according to CAN/CSA C22.2 No. 60065-03.

FCC Information:

1. Use the attached specied cables with the E461/E551 color monitor so as

not to interfere with radio and television reception.

(1) Please use the supplied power cord or equivalent to ensure FCC

compliance.

(2) Please use the supplied shielded video signal cable, Mini D-SUB 15

pin to Mini D-SUB 15 pin.

2. This equipment has been tested and found to abide by the limits of a Class B

digital device, pursuant to part 15 of the FCC Rules. These limits are intended

to provide reasonable security against harmful interference in a residential

deployment. This equipment generates, uses, and can radiate radio frequency

energy, and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a certain installation. If this

equipment does cause damaging interference to radio or television reception,

which can be determined by powering the equipment on and off, the user

is encouraged to attempt correcting the interference by one or more of the

following procedures:

• Reorient or relocate the receiving display.

English-8

English-9

• Increase the separation between the equipment and display.

• Connect the equipment into a different outlet than the receiver.

• Consult your dealer or an experienced radio/display technician for

assistance.

If necessary, the user should contact the dealer or an experienced radio/

television technician for additional suggestions. The user may nd the

following booklet, prepared by the Federal Communications Commission,

helpful: “How to Identify and Resolve Radio-display Interference Problems.”

This booklet is available from the U.S. Government Printing Ofce,

Washington, D.C., 20402, Stock No. 004-000-00345-4.

Windows is a registered trademark of Microsoft Corporation.

NEC is a registered trademark of NEC Corporation.

All other brands and product names are trademarks or registered trademarks

of their respective owners.

HDMI, the HDMI logo and High-Denition Multimedia Interface are trademarks

or registered trademarks of HDMI Licensing LLC in the United States and

other countries.

Andere Handbücher für E461

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere NEC Monitor Handbücher

NEC

NEC X754HB Bedienungsanleitung

NEC

NEC AS171-BK Bedienungsanleitung

NEC

NEC NEC MultiSync LCD2110 LCD2110 LCD2110 Bedienungsanleitung

NEC

NEC MultiSync LCD2060NX Bedienungsanleitung

NEC

NEC MultiSync LCD1525X Bedienungsanleitung

NEC

NEC LCD1990SXi BK MultiSync -LCD Leitfaden

NEC

NEC LCD2070WNX - MultiSync - 20.1" LCD Monitor Bedienungsanleitung

NEC

NEC P241W-BK Bedienungs- und Wartungshandbuch

NEC

NEC MultiSync M431 Bedienungsanleitung

NEC

NEC E552 Bedienungsanleitung

NEC

NEC M46B-AVT - 46" LCD TV Bedienungsanleitung

NEC

NEC LCD2070NX - MultiSync - 20" LCD Monitor Bedienungsanleitung

NEC

NEC M40-2-AVT - 40" LCD TV Bedienungsanleitung

NEC

NEC P1150 - MultiSync - 21" CRT Display Technisches Handbuch

NEC

NEC OLP-484 Bedienungsanleitung

NEC

NEC MultiSync P403 Bedienungsanleitung

NEC

NEC FA3435K series Bedienungsanleitung

NEC

NEC MultiSync E224F Bedienungsanleitung

NEC

NEC Multisync Plus JC-1501VMA Bedienungsanleitung

NEC

NEC LCD71V - AccuSync TFT LCD Flat Panel Monitor Bedienungsanleitung

NEC

NEC MultiSync C750Q Bedienungsanleitung

NEC

NEC P461-AVT - MultiSync - 46" LCD TV Bedienungsanleitung

NEC

NEC NEC MultiSync LCD1860NX LCD1860NX LCD1860NX Bedienungsanleitung

NEC

NEC MD212MC - MultiSync - 21.3" LCD Monitor Bedienungsanleitung

Beliebte Monitor Handbücher anderer Marken

Linear Acoustic

Linear Acoustic LQ-1000 Bedienungsanleitung

AOC

AOC I2579V Bedienungsanleitung

Gateway

Gateway FPD1520 Bedienungsanleitung

Furuno

Furuno Mu 120c Bedienungsanleitung

Asus

Asus VB171D - 17" LCD Monitor Bedienungsanleitung

Dell

Dell S2230MX Gebrauchsanweisung

Philips

Philips 107C64 Bedienungsanleitung

Dell

Dell S2409WFP Bedienungsanleitung

EverFocus

EverFocus EN-7517E Bedienungsanleitung

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Bedienungsanleitung

Dell

Dell Precision 7680 Bedienungsanleitung

LG 50PM1M - - 50" Plasma Panel Bedienungsanleitung

Bosch

Bosch DDU 9 Bedienungsanleitung

Acer

Acer A231HL Bedienungsanleitung

Philips

Philips 86BDL4152T Bedienungsanleitung

Emay

Emay SleepO2 Bedienungsanleitung

IBM

IBM 6360 Montageanleitung

LG M1950D-PZ Bedienungsanleitung