NEC MultiSync V521 Bedienungsanleitung
MultiSync V521
MultiSync V721
MultiSync V921
User’s Manual
UÏivatelská pfiíruãka
Bedienerhandbuch
Οδηγίεσ Χρήσησ
Manual del usuario
Manuel Utilisateur
Manuale utente
Gebruikershandleiding
Podr´cznik u˝ytkowinka
Руководство пользователя
Kullan∂c∂ Klavuzu
00Cover_all.p65 01.11.2000, 11:48 Uhr1
FCC Information
1. Use the attached specified cables with the N0501/N0701/N9902
color monitor so as not to interfere with radio and television
reception.
(1) Please use the supplied power cable or equivalent to ensure
FCC compliance.
(2) Shielded captive type signal cable.
Use of other cables may cause interference with radio and
television reception.
2. This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy, and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
•Consult your dealer or an experienced radio/TV technician for help.
If necessary, the user should contact the dealer or an experienced radio/
television technician for additional suggestions. The user may find the
following booklet, prepared by the Federal Communications Commission,
helpful: “How to Identify and Resolve Radio-TV Interference Problems”.
This booklet is available from the U.S. Government Printing Office,
Washington, D.C., 20402, Stock No. 004-000-00345-4.
00Cover_all.p65 03.11.2000, 14:39 Uhr2
English
âesky
Deutsch
Ελληνικά
Español
Français
Italiano
Nederlands
Polski
Русский
Türkçe
01b_XChapterOpener 01.11.2000, 11:48 Uhr1
01b_XChapterOpener 01.11.2000, 11:48 Uhr2
English-1
English
Declaration of the Manufacturer
We hereby certify that the colour monitors
MultiSync V521(N0501)
MultiSync V721(N0701)
MultiSync V921(N9902)
are in compliance with
Council Directive 73/23/EEC:
- EN 60950
Council Directive 89/336/EEC:
- EN 55022
- EN 61000-3-2
- EN 61000-3-3
- EN 50082-1
(IEC 801-2)
(IEC 801-3)
(IEC 801-4)
and marked with
NEC-Mitsubishi Electric Visual Systems Corporation
686-1, NISHIOI OI-MACHI
ASHIGARAKAMI-GUN
KANAGAWA 258-8533, JAPAN
01b_english 01.11.2000, 11:48 Uhr1
English-2
Safety Instruction
Caution:
When operating the MultiSync V521/V721/V921 with a 220-240V AC
power source in Europe except UK, use the power cord provided with the
monitor.
In UK, a BS approved power cord with moulded plug has a Black (five
Amps) fuse installed for use with this equipment. If a power cord is not
supplied with this equipment please contact your supplier.
When operating the MultiSync V521/V721/V921 with a 220-240V AC
power source in Australia, use the power cord provided with the monitor.
For all other cases, use a power cord that matches the AC voltage of the
power outlet and has been approved by and complies with the safety
standard of your particular country.
ENERGY STAR®Product
As an ENERGY STAR Partner, NEC-Mitsubishi Electronics Display of
America Inc. has determined that this product meets the ENERGY STAR
guidelines for energy efficiency. The ENERGY STAR emblem does not
represent EPA endorsement of any product or service.
IBM is registered trademark of International Business Machines Corporation
Apple and Macintosh are registered trademarks of Apple Computer Inc.
Microsoft and Windows are registered trademarks of the Microsoft Corporation.
ENERGY STA R is a U.S. registered mark.
NEC is a registered trademark of NEC Corporation.
All other trademarks or registered trademarks are property of their respective owners.
01b_english 01.11.2000, 11:48 Uhr2
English-3
English
Contents
V Series monitor box* should contain the following:
•MultiSync V Series Monitor with tilt / swivel base MultiSync V521,
MultiSync V721 or MultiSync V921
•Power cord
•Captive Signal Cable
•User‘s manual
•CD-ROM includes complete User‘s Manual in PDF format and
Windows related files (Inf file and color profile). To see the complete
User‘s Manual, Acrobat Reader 4.0 must be installed on your PC.
* Remember to save your original box and packing material to transport
or ship the monitor.
01b_english 01.11.2000, 11:48 Uhr3
English-4
Tilt / swivel base fixing,
removing
Fixing
This product consists of the MultiSync monitor and the tilt / swivel base.
When fixing the tilt / swivel base to the MultiSync monitor, please follow
the steps below.
•Push the six hooks of the tilt / swivel base into the six holes at the
bottom of the MultiSync monitor.
•Then slide the tilt /swivel base forward.
•Then the latch above the tilt / swivel base engages it is secure.
Removing
Please removing the tilt / swivel base when transporting for repair.
•Push down the latch of the MultiSync monitor and pull out the tilt /
swivel base.
•Slide backward the tilt / swivel base from the front of the MultiSync
monitor.
•Pull out the tilt / swivel base from the holes of the MultiSync monitor.
01b_english 01.11.2000, 11:48 Uhr4
English-5
English
Quick Start
To attach the MultiSync V Series monitor to your
system, follow these instruction:
1. Turn off the power to your computer and MultiSync monitor.
2. If necessary, install the display card. For more information, refer to the
display card manual.
3. For the PC: Connect the 15-pin mini D-SUB of the captive signal
cable to the connector of the display card in your system (Figure A.1)
Tighten all screws.
For the Mac: Connect the Macintosh Cable Adapter (not included) to
the monitor connector on the Macintosh (Figure B.1). Attach the
15-pin mini D-SUB end of the captive signal cable to the Macintosh
cable adapter on the computer (Figure B.1). Tighten all screws.
4. Connect one end of the power cord to the MultiSync V Series monitor
and the other end to the power outlet (Figure C.1).
5. Turn on the monitor (Figure D.1) and the computer.
6. This completes the installation.
NOTE: If you have any problems, please refer to the
Troubleshooting section of this User‘s Manual.
Captive Signal Cable
15-pin-mini-D-SUB
Figure A.1
01b_english 01.11.2000, 11:48 Uhr5
English-6
Figure B.1
Figure C.1
Figure D.1
Computer Mac Adapter
(not included) 15-pin mini D-SUB
Captive Signal Cable
Power Outlet
Power cord
01b_english 01.11.2000, 11:48 Uhr6
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Sprachen:
Andere NEC Monitor Handbücher
NEC
NEC LCD8205-P - MultiSync - 82" LCD Flat Panel... Bedienungsanleitung
NEC
NEC 42XM5 - PlasmaSync - 42" Plasma Panel Bedienungsanleitung
NEC
NEC MultiSync LCD1700M+ Bedienungsanleitung
NEC
NEC MultiSync X551UHD IGB Bedienungsanleitung
NEC
NEC MultiSync P554 Bedienungsanleitung
NEC
NEC PlasmaSync 42XC10 Bedienungsanleitung
NEC
NEC MultiSync LCD1560V+ LCD1560V+ LCD1560V+ Bedienungsanleitung
NEC
NEC MultiSync LCD1760NX-BK Bedienungsanleitung
NEC
NEC 42XP10 - PlasmaSync - 42" Plasma Panel Bedienungsanleitung
NEC
NEC MD205MG-1 - MultiSync - 20.1" LCD Monitor Bedienungsanleitung
NEC
NEC EA244WMi-BK Bedienungsanleitung
NEC
NEC NEC MultiSync LCD1550X LCD1550X LCD1550X Bedienungsanleitung
NEC
NEC MultiSync LCD15T-C Bedienungsanleitung
NEC
NEC MultiSync MD21GS-3MP Bedienungs- und Sicherheitshinweise
NEC
NEC MultiSync FE1250+ Bedienungsanleitung
NEC
NEC LCD2180WGLEDBKSV - MultiSync - 21.3" LCD... Bedienungsanleitung
NEC
NEC MultiSync ME Series Bedienungsanleitung
NEC
NEC AccuSync LCD5V Bedienungsanleitung
NEC
NEC MultiSync FP1375X Bedienungsanleitung
NEC
NEC PlasmaSync 50MP2 Bedienungsanleitung
