NEC Built-In AIT Bedienungsanleitung

Built-In AIT for AIT-3

User’s Guide

Make sure you read this manual before using the product.

After reading this manual carefully, store it in a safe place.

2-649-391-11(1)

2Safety Consideration

Trademarks

Microsoft and the Microsoft logo are registered trademarks of Microsoft Corporation in the United

States and other countries.

Advanced Intelligent Tape is a trademark of the Sony Corporation.

The company and product names contained in this manual are trademarks or registered trademarks

of the respective companies.

Windows 2000 is an abbreviation for Microsoft®Windows®2000 Professional, Microsoft®

Windows®2000 Server, and Microsoft®Windows®2000 Advanced Server.

Windows XP is an abbreviation for Microsoft®Windows®XP Professional and Microsoft®

Windows®XP Home Edition.

Windows Server 2003 is an abbreviation for Microsoft®Windows Server™ 2003 Standard Edition,

Microsoft®Windows Server™ 2003 Enterprise Edition, Microsoft®Windows Server™ 2003

Datacenter Edition, and Microsoft®Windows Server™ 2003 Web Edition.

All names used in the sample applications are fictitious. They have no relation with any product,

party or individual names.

Für kunden in Deutshland

Diese Ausrüstung erfüllt die Europäischen EMC-Bestimmungen für die Verwendung in folgender / folgenden Umgebung(en):

•Wohngegenden

•Gewerbegebiete

•Leichtindustriegebiete

(Diese Ausrüstung erfüllt die Bestimmungen der Norm EN55022, Klasse B.)

Remarks

(1) Reproduction of this document or portions thereof without prior approval is prohibited.

(2) The information contained in this document is subject to change at any time, without prior

notice.

(3) Reprinting or changing of this document without prior approval is prohibited.

(4) All efforts have been made to ensure that the contents of this manual are correct; however,

should any doubts arise, or errors or missed entries be detected, It would be greatly appreciate

it if our dealers are informed about it.

(5) Please note that in no event the vendor be liable for any damages whatever arising out of the

use of this device, regardless of item (4) above.

Safety Consideration 3

Keep this User’s Guide at hand for quick reference at anytime necessary.

Safety Considerations - Must Read -

Follow the instructions given in this User’s Guide for proper operations and safe use of the

device.

SAFETY INDICATIONS

This User’s Guide describes the device components with possible danger, hazards that

may be caused by ignoring warnings, and preventive actions against such hazards.

Components with possible danger are indicated with a warning label placed on or around

them. In the User’s Guide or warning labels, “WARNING” or “CAUTION” is used to

indicate a degree of danger. These terms are defined as follows:

Warning

Failure to heed this sign could result in serious

injury or death.

Caution

Failure to heed this sign could result in personal

in-jury or damage to properties.

Precautions and notices against hazards are presented with one of the follow-ing three

symbols. The individual symbols are defined as follows:

Attention

Prohibited

Action

Mandatory

Action

This symbol indicates the presence of a

hazard if the instruction is ignored. An

image in the symbol illustrates the hazard

type.

This symbol indicates prohibited actions.

An image in the symbol illustrates a

particular prohibited action.

This symbol indicates mandatory actions.

An image in the symbol illustrates a

mandatory action to avoid a particular

hazard.

(sample)

(Electric shock)

(sample)

(Do not

disassemble)

(sample)

(Disconnect the

power cord)

4Safety Consideration

(Sample)

SYMBOLS USED IN THIS USER’S GUIDE AND WARNING LABELS

Attention

Prohibited Action

Mandatory Action

Warning

Do not install the device while the power is turned on.

Unplug the AC power cord from the main power source when

installing/ uninstalling the device to/from basic processing unit

or connect it with the enclosure. Failure to follow this warning

may cause an electric shock.

A symbol for

arousing attention

A content of

possible danger

A term indicating a

hazard level

Indicates that improper use

may cause an electric shock.

Indicates that improper use

may cause fumes or fire.

Indicates that improper use

may cause fingers to be caught.

Indicates a general notice or

warning that cannot be

specifically identified.

Indicates a general prohibited

action or warning that cannot

be specifically identified.

Do not disassemble, repair, or

modify the device. Otherwise,

an electric shock or fire may be

caused.

Unplug the power cord.

Otherwise, an electric shock or

fire may be caused.

Indicates a general mandatory

action or warning that cannot

be specifically identified.

Indicates that improper use

may cause personal injury.

Safety Consideration 5

SAFETY NOTES

This section provides several precautions to enable you to use the product safely and

correctly and to prevent injury and property damage. Read this section carefully to ensure

proper and safe use of the product. For symbols, see “SAFETY INDICATIONS” provided

earlier.

General Attention

Warning

Do not use in life-critical applications or applications

requiring high reliability.

This device is not intended for integration with or control of

facilities or equipment that may affect human life or that require a

high degree of reliability, such as medical equipment, nuclear

power facilities, aerospace instruments, and transportation

equipment. The manufacturer does not assume any liability for

accidents resulting in injury or death, or for any damages to

property that may occur as a result of using this device in such

facilities, equipment, or control systems.

Do not use the Built-in AIT if any smoke, odor, or noise is

present.

If smoke, odor, or noise is present, immediately turn off the

POWER switch and disconnect the power plug from the outlet,

then contact your sales agent. Using the Built-in AIT in such

conditions may cause a fire.

Keep needles or metal objects away from the Built-in AIT.

Do not insert needles or metal objects into ventilation holes in

the Built-in AIT. Failure to follow this warning may cause an

electric shock.

Caution

Keep water or foreign matter away from the Built-in AIT.

Do not let any kind of liquid (water etc.) or foreign matter

(e.g.,pins or paper clips) enter the Built-in AIT. Failure to follow

this warning may cause an electric shock, a fire, or a failure of

the Built-in AIT. When such things accidentally enter the Built-in

AIT, immediately turn off the power and disconnect the power

plug from the outlet. Do not disassemble the Built-in AIT. Contact

your sales agent.

6Safety Consideration

Attention to Power or Power Cord

Warning

Do not hold the DC cable with a wet hand.

Do not disconnect/connect the cable while your hands are wet.

Failure to follow this warning may cause an electric shock.

Caution

Do not install the device while the power is turned on.

Unplug the AC power cord from the main power source when

installing/ uninstalling the device to/from basic processing unit or

connect it with the enclosure. Failure to follow this warning may

cause an electric shock.

Insert the DC cable into the outlet as far as it goes.

Heat generation resulting from a halfway inserted DC cable

(imperfect contact) may cause a fire. Heat will also be generated

if condensation is formed on dusty blades of the halfway inserted

cable, increasing the possibility of a fire.

Do not connect the Built-in AIT by unspecified cabling.

Connecting or cabling with DC cable should be done in

accordance with the procedure specified in the User’s Guide.

Unspecified connecting or cabling may cause an electric shock

or a fire.

Do not use any damaged power cord.

If the power cord is damaged, immediately replace it with a new

part of same type. Do not repair the damaged section for reuse.

Otherwise, the section repaired with vinyl tape or the like will be

overheated to cause an electric shock or a fire.

Use the authorized cable only.

Use only the specified cable when connecting the Built-in AIT

with a basic processing unit. Use of an unspecified cable or

connection by unspecified cabling may cause a fire.

Safety Consideration 7

Attention to Installing, Moving, Storing, Connection

Caution

Do not close the ventilation hole.

Do not close the ventilation hole in the front side of the Built-in

AIT. Otherwise, Its internal temperature will rise to cause

malfunctions or a fire.

Do not connect/disconnect the interface cables before

unplugging the power plug.

Before connecting/disconnecting the interface cables, disconnect

the power plug of the main power unit from the outlet. If the

power is off but the power plug is still connected, you may get an

electric shock.

Do not use the unspecified interface cables.

Use only the cable authorized and locate the device and

connector before connection. Use of an unauthorized cable or

displaced connection may cause a short circuit, resulting in a fire.

When handling or connecting the interface cables, keep the

notes as follows:

•Do not tread on cables.

•Do not load on the cable.

•Insert the cable connector as far as it goes.

•Do not use damaged cables.

•Do not use damaged connectors.

•Make sure that screwing or the like be done firmly.

Do not use or store this product in corrosive environment.

Avoid the usage or storage of this product in an environment

which may be exposed to corrosive gases, such as those

including but not limited to :

sulfur dioxide, hydrogen sulfide, nitrogen dioxide, chlorine,

ammonia and/or ozone.

Avoid installing this product in a dusty environment or one that

may be exposed to corrosive materials such as sodium chloride

and/or sulfur.

Avoid installing this product in an environment which may have

excessive metal flakes or conductive particles in the air.

Such environments may cause corrosion or short circuits within

this product, resulting in not only damage to this product, but

may even lead to be a fire hazard.

If there are any concerns regarding the environment at the planned

site of installation or storage, please contact your sales agent.

8Safety Consideration

Attention to Handling or Maintenance

Warning

Do not disassemble, repair, or alter the Built-in AIT.

Never attempt to disassemble, repair, or alter the Built-in AIT on

any occasion other than described in this User’s Guide. Failure

to follow this instruction may cause an electric shock or a fire as

well as malfunctions of the Built-in AIT.

The following can be performed by the Built-in AIT user. Do not

perform any other type of disassembly than described here.

•Remove or install brackets

•Remove or install the DC signal cable

Do not handle while the power plug is connected.

Before handling or cleaning the Built-in AIT, disconnect the

power plug of the main power unit from the outlet. If the power is

off but the power plug is still connected, you may get an electric

shock.

Caution

Insert the cables into the connectors as far as it goes.

Heat generation resulting from a halfway inserted cables or

Interface cables (imperfect contact) may cause a fire. Heat will

also be generated if condensation is formed on dusty blades of

the halfway inserted cable, increasing the possibility of a fire.

Caution

High temperature

Immediately after the server is powered off, its internal

components such as hard disks are very hot. Leave the server

until its internal components fully cool down before installing/

removing any component.

Safety Consideration 9

Attention to Operation

Warning

Do not insert your hands into the cartridge load

compartment.

Do not insert your hands into the cartridge load compartment.

Otherwise, the fingers will be caught/pinched by the Built-in AIT

to cause an injury.

Do not touch the Built-in AIT when it thunders.

If it starts thundering, do not touch any part of the Built-in AIT.

Failure to follow this warning may cause an electric shock or a

fire.

Keep away pets.

Keep away pets from the Built-in AIT. Insertion their hair or

excrements may cause a fire or an electric shock.

Do not use a cellular phone or a pager

Tu rn off the power of the cellular phone or a pager. Otherwise,

malfunction may be caused.

10 Safety Consideration

For Correct Operation

To operate the Built-In AIT correctly, observe the following points. For considerations on handling

the AIT data cartridge, refer to the chapter “AIT Data Cartridge”.

•Set the Built-In AIT’s SCSI ID so that it will not duplicate with SCSI ID of other SCSI equip-

ment.

→Otherwise, an operation error will occur.

•Do not turn off the basic processing unit when the TAPE MOTION LED on the front of the

Built-In AIT is blinking.

→This may cause a machine failure or damage of backup data.

•Do not store the Built-In AIT in a place subject to corrosive gas, chemicals or splash of chemi-

cals.

→A Built-In AIT part may be deformed or damaged and may not be able to operate correctly.

•Do not store the Built-In AIT in a place subject to strong vibrations.

→This may cause a machine failure.

• As the data cartridge set in the Built-In AIT, use our “AIT Data Cartridge” (models: AIT-1,

AIT-2 or AIT-3).

→If you use a data cartridge of other manufacturer, a read/write error may occur.

•Clean the Built-In AIT on a regular basis.

→For details about cleaning the Built-In AIT, see “Cleaning” (page 43).

• When cleaning the Built-In AIT, use our “AIT Cleaning Cartridge”.

→If you use a cleaner of other manufacturer, a machine failure may occur.

•Do not transport the Built-In AIT with a data cartridge inserted.

→Shocks may damage the Built-In AIT and/or data cartridge.

•Eject the data cartridge when you are done performing a backup.

→This may shorten the operational life of the data cartridge and/or cause malfunctions.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere NEC Lagerung Handbücher

NEC

NEC Versa VXi OP-220-73005 Bedienungsanleitung

NEC

NEC FZ110A - Zip 100MB - 100 MB ZIP Drive Bedienungsanleitung

NEC

NEC Versa LX Bedienungsanleitung

NEC

NEC N8102-509F Bedienungsanleitung

NEC

NEC N8115-05 Bedienungsanleitung

NEC

NEC LL030F Bedienungsanleitung

NEC

NEC Storage Manager Bedienungsanleitung

NEC

NEC ST1240 Bedienungsanleitung

NEC

NEC N8102-686 Bedienungsanleitung

NEC

NEC N8102-708 Bedienungsanleitung

NEC

NEC N8102-693 Bedienungsanleitung

NEC

NEC S2500 Bedienungsanleitung

NEC

NEC N8151-143 Benutzerhandbuch

NEC

NEC Versa Lite Bedienungsanleitung

NEC

NEC NS170 Bedienungsanleitung

NEC

NEC N8151-34B Bedienungsanleitung

NEC

NEC FZ110A - Zip 100MB - 100 MB ZIP Drive Bedienungsanleitung

NEC

NEC FDI036A Technische Daten

NEC

NEC N8151-54 Bedienungsanleitung

NEC

NEC N8118-301 Bedienungsanleitung

NEC

NEC NR-9300 Bedienungsanleitung

NEC

NEC D3 Bedienungsanleitung

NEC

NEC D3-10i Bedienungsanleitung

NEC

NEC FD1165 Bedienungsanleitung

Beliebte Lagerung Handbücher anderer Marken

QNAP

QNAP TS 32PXU Series Bedienungsanleitung

LaCie

LaCie RUGGED RAID Bedienungsanleitung

Freecom

Freecom CLS DOCK Bedienungsanleitung

PNY

PNY Attache P-FD64MBATT3 Bedienungsanleitung

HP StorageWorks MSL2024 Bedienungsanleitung

OLT

OLT 6x6 Maximizer Bedienungsanleitung

Transcend

Transcend JetFlash 160 Bedienungsanleitung

LaCie

LaCie RUGGED MINI Bedienungsanleitung

Thunderbolt

Thunderbolt 600 Bedienungsanleitung

Panasonic

Panasonic LB-DH8 series Handbuch

Intel

Intel RAID High Availability Bedienungsanleitung

LaCie

LaCie 12big Thunderbolt 3 Bedienungsanleitung

Spectra Logic

Spectra Logic T-Series Spectra T50e Bedienungsanleitung

Panasonic

Panasonic LKM-F931-1 Bedienungsanleitung

Tabernus

Tabernus Enterprise Erase E2400 Bedienungsanleitung

Rocstor

Rocstor COMMANDER 3F series Bedienungsanleitung

HP P9000 Bedienungsanleitung

Western Digital

Western Digital Ultrastar Data60 Bedienungsanleitung