NEC S1500 Bedienungsanleitung



Setup Guide

S1500 Disk Array Unit

S1500

This page is deliberately left empty.

Setup Guide

www.nec-computers.com

100

Proprietary Notice and Liability Disclaimer

The information disclosed in this document, including all designs and related materials, is the

valuable property of NEC Computers and/or its licensors. NEC Computers and/or its licensors,

as appropriate, reserve all patent, copyright and other proprietary rights to this document,

including all design, manufacturing, reproduction, use, and sales rights thereto, except to the

extent said rights are expressly granted to others.

The NEC Computers product(s) discussed in this document are warranted in accordance with

the terms of the Warranty Statement accompanying each product. However, actual

performance of each product is dependent upon factors such as system configuration, customer

data, and operator control. Since implementation by customers of each product may vary, the

suitability of specific product configurations and applications must be determined by the

customer and is not warranted by NEC Computers.

To allow for design and specification improvements, the informationinthis document issubject

to change at any time, without notice. Reproduction of this document or portions thereof with-

out prior written approval of NEC Computers is prohibited.

Trademarks

NEC ESMPRO and NEC EXPRESSBUILDER are trademarks of NEC Corporation.

Microsoft, Windows, Windows Server, and MS-DOS are registered trademarks or trademarks of

Microsoft Corporation in the United States and other countries.

Intel and Pentium are registered trademarks of Intel Corporation.

Xeon is a trademark of Intel Corporation.

Novell and NetWare are registered trademarks of Novell, Inc. of the United States.

Datalight is a registered trademark of Datalight, Inc.

ROM-DOS is a registered trademark of Datalight, Inc.

AT is a registered trademark of International Business Machines Corporation in the United States and

other countries.

Adaptec and its logo is a registered trademark of Adaptec, Inc. of United States.

SCSISelect is a trademark of Adaptec, Inc. of the United States.

Adobe, Adobe logo, and Acrobat are trademarks of Adobe Systems Incorporated.

DLT and DLTtape are trademarks of Quantum Corporation of the United States.

All other product, brand, or trade names used in this publication are the trademarks or registered

trademarks of their respective trademark owners.

rev 1.0 April 2006

NEC Computers S.A.S.

10 rue Godefroy

Immeuble OPTIMA

92821 PUTEAUX

FRANCE

This page is deliberately left empty.

FEDERAL COMMUNICATIONS COMMISSION

RADIO FREQUENCY INTERFERENCE STATEMENT

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used

in accordance with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which case

the user will be required to correct the interference at the user’s own expense.

Momentary voltage drop prevention:

This network storage unit may be affected by a momentary voltage drop caused by lightning. Use an

AC uninterruptible power supply (UPS) unit to prevent a momentary voltage drops.

Safety Precautions

Before using this unit, we recommend you read this manual carefully and take all necessary

precautions in order to use this unit safely and correctly, therefore avoiding potential personal or

property damage. Keep this manual nearby for easy reference.

The following symbols are used in this manual so that you can easily understand how to operate the

unit safely and correctly.

WARNING Indicates that there is a risk of death or serious injury.

CAUTION Indicates that there is a risk of burn or injury.

Risks and the necessary actions to reduce risks are indicated individually by the following symbols.

Indicates the risk of smoke emission or fire outbreak.

Indicates the risk of electric shock.

Indicates required general actions for operators.

Indicates the necessity to unplug the power cord from the outlet.

Indicates general prohibitions.

Indicates a device must be kept away from inflammable objects.

Indicates the danger of an injury due to harmful material.

- ii -

Notes on Use

The following table includes information necessary for the proper and safe operation of the disk array

unit.

WARNING

Do not use the disk array unit in an area of high humidity. If so, a fault, electrical

shock, or fire may occur.

Do not use the disk array unit in an area where inflammable gas and/or

combustible materials are placed. If so, a fire or explosion may occur.

Do not overload AC outlets with power cords. If so, a fire may occur.

Do not put heavy objects on a power cord. If so, the insulating coating of the

power cord may be damaged, fire may occur, and/or you may be electrically

shocked.

Do not install the disk array unit in a dirty or dusty environment. Remove any dust

adhering to AC outlets and the plugs of power cords. If dust remains adhering to

an AC outlet and/or plug, a fire may occur.

Do not connect the plug of a power cord to an AC outlet with a wet hand. If so, you

may be electrically shocked.

While the disk array unit can accept power in the range of 100 - 240 VAC (50/60

Hz), the power cord shipped with the disk array unit can only accept 220 – 240

VAC. Use 220 – 240 VAC (50/60 Hz) when the included power cord is used. Using

power of a different voltage may cause electric shock, smoke, and/or fire to occur.

The controller of the disk array unit contains a lithium battery. Do not remove the

lithium battery. The lithium battery may explode when it is brought close to fire or

immersed in water. Dispose of the controller according to local ordinance. Contact

your local government for details.

If the disk array unit does not operate normally due to the life of the lithium

batteries, contact your service representative. Do not disassemble the controller,

or replace or charge battery by yourself.

- iii -

CAUTION

Do not install the disk array unit and the host systems in an unsafe or unstable

manner. If so, damage may occur to the unit and/or you may be personally injured.

Do not install the disk array unit and the power cords in an area with direct sunshine

or near any apparatus generating heat such as a heater. If so, a fault may occur.

Furthermore, the insulating coating of the power cord may be melted causing fire or

electric shock to occur.

Insert the plug of a power cord to an AC outlet securely. Tightly secure the DC

power cable with the screw. Any power cord shall be routed with sufficient margin to

avoid excess strain from being applied to the plugs of the power cord or the power

cord itself. If a power cord is removed from the AC outlet during operation, data may

be lost and/or a fault may occur.

To prevent electric shocks, connect all power cords to AC outlets with earth

grounding. Connecting the earth line to a gas pipe is extremely dangerous. Never

do it.

Before connecting or removing a peripheral device from the disk array unit, turn off

all the power switches of the disk array unit and peripherals and pull out the power

cords from the AC outlets or distribution board. If you do not do so, some units may

be damaged and/or you may be electrically shocked.

To carry or reinstall the disk array unit, disconnect all cables and power cords

beforehand. If you do not do so, some units may be damaged, you may be

electrically shocked, and/or a fire may occur.

To install the unit in a rack, observe the following guidelines.

1. Temperature – Give consideration to installing the equipment in an environment

compatible with the manufacturer's recommended ambient temperature (TMRA).

2. Reduced Air Flow – Do not compromise the amount of air flow required for safe

operation of the equipment is not compromised.

3. Mechanical Loading – Do not achieve hazardous conditions due to uneven

mechanical loading.

4. Circuit Overloading – Give consideration to the connection of the equipment to the

supply circuit and the effect that overloading the circuits might have on over current

protection and supply wiring. Appropriate consideration of equipment nameplate

ratings should be used when addressing this concern.

5. Reliable Grounding – Maintain reliable grounding of rack-mounted equipment. Pay

particular attention to supply connections other than direct connections to the

branch circuit (e.g., use of power strips).

- iv -

CAUTION

Handling optical fibers

Handle optical fibers carefully and gently.

The minimum bending radius of optical fibers must be 30 mm.

Do not apply any shock (e.g., let it fall on the floor).

Attach a protective cap to all empty connectors (on the server side, too).

Keep the connector cap for future use when a cable is connected.

Dust and/or dirt may attenuate the optical power of optical fiber and cause data

errors to occur. Clean any optical fiber cable whenever it is inserted into the mating

connector as described belowe. Never clean a connector in which light is present in

the fiber.

1. Use a lint-free "wipe" that has been dipped into alcohol (use of 99%

reagent-grade alcohol is recommended).

2. Wipe immediately after with a dry lint-free wipe.

Blow-dry using a can of clean, compressed air

Handling of the DAC-DE cable

Improper handling of this cable may cause a decrease of electric characteristics and/or

mechanical destruction (disconnection). Note the following:

1. Route the cable with sufficient margin.

2. Do not apply stress to the cable (e.g., strongly pulling it).

3. Ensure a minimum bending radius of 50 mm.

Anti-static measures

Be sure to take anti-static measures (e.g., wear a wrist strap) when working with

electronic components such as Host Bus Adapters (HBA) and disk drives.

Alternatively, put one of your hands on the metallic (unpainted) part of the storage unit

before handling such a component.

Disposing of the productl

Disposing of your used NEC product

In the European Union

EU-wide legislation as implemented in each Member State requires that used electrical and

electronic products carrying the mark (Left) must be disposed of separately from normal

household waste. The equipment with this mark may include electrical accessories

(e.g. memory cards). When disposing of used NEC products, you should comply with

applicable legislation or such terms which may have been agreed between NEC and

your company regarding used products. This mark on electrical and electronic

products only applies to the current European Union Member States.

Outside the European Union

If you wish to dispose of used electrical and electronic products outside the European

Union, please contact your local authority and ask for the correct method of disposal.

- v-

Safety Indications

Warning labels are attached to components (or a location in their vicinity) that pose a possible danger

or to inform the user that a hazardous situation may arise when operating the disk array unit. (Do not

intentionally remove or damage any of the labels.)

If you find any labels totally/partially removed or illegible due to damage, contact your sales

representative.

- vi -

Inhaltsverzeichnis

Andere NEC Lagerung Handbücher

NEC

NEC Versa VXi OP-220-73005 Bedienungsanleitung

NEC

NEC D3-10i Bedienungsanleitung

NEC

NEC FD1165 Bedienungsanleitung

NEC

NEC Versa LX Bedienungsanleitung

NEC

NEC FZ110A - Zip 100MB - 100 MB ZIP Drive Bedienungsanleitung

NEC

NEC FZ110A - Zip 100MB - 100 MB ZIP Drive Bedienungsanleitung

NEC

NEC T30A Bedienungsanleitung

NEC

NEC D3 Bedienungsanleitung

NEC

NEC Storage Manager Bedienungsanleitung

NEC

NEC VERSA S1300 Series Bedienungsanleitung

NEC

NEC S2500 Bedienungsanleitung

NEC

NEC NVM-2000 Leitfaden

NEC

NEC Storage HS8 Bedienungsanleitung

NEC

NEC N8151-34B Bedienungsanleitung

NEC

NEC LL030F Bedienungsanleitung

NEC

NEC N8102-686 Bedienungsanleitung

NEC

NEC N8151-54 Bedienungsanleitung

NEC

NEC N8151-105 Benutzerhandbuch

NEC

NEC FDI036A Technische Daten

NEC

NEC N8551-28F Bedienungsanleitung

NEC

NEC NS170 Bedienungsanleitung

NEC

NEC N8118-301 Bedienungsanleitung

NEC

NEC VERSA S1300 Series Bedienungsanleitung

NEC

NEC ST1240 Bedienungsanleitung

Beliebte Lagerung Handbücher anderer Marken

QNAP

QNAP TS 32PXU Series Bedienungsanleitung

LaCie

LaCie RUGGED RAID Bedienungsanleitung

Freecom

Freecom CLS DOCK Bedienungsanleitung

PNY

PNY Attache P-FD64MBATT3 Bedienungsanleitung

HP StorageWorks MSL2024 Bedienungsanleitung

OLT

OLT 6x6 Maximizer Bedienungsanleitung

Transcend

Transcend JetFlash 160 Bedienungsanleitung

LaCie

LaCie RUGGED MINI Bedienungsanleitung

Thunderbolt

Thunderbolt 600 Bedienungsanleitung

Panasonic

Panasonic LB-DH8 series Handbuch

Intel

Intel RAID High Availability Bedienungsanleitung

LaCie

LaCie 12big Thunderbolt 3 Bedienungsanleitung

Spectra Logic

Spectra Logic T-Series Spectra T50e Bedienungsanleitung

Panasonic

Panasonic LKM-F931-1 Bedienungsanleitung

Tabernus

Tabernus Enterprise Erase E2400 Bedienungsanleitung

Rocstor

Rocstor COMMANDER 3F series Bedienungsanleitung

HP P9000 Bedienungsanleitung

Western Digital

Western Digital Ultrastar Data60 Bedienungsanleitung