NEC FP-68T30 Bedienungsanleitung

IINN

NNSS

SSTT

TTRR

RRUU

UUCC

CCTT

TTII

IIOO

OONN

NNMM

MMAA

AANN

NNUU

UUAA

AALL

CCOOLLOOUURRTTEELLEEVVIISSIIOONN

MODEL No. :FP-68T30

Safeguards 2

INTRODUCTION

Features 3

Installation 3

To connect the aerial 4

To prepare the remote control 4

Identification of controls 5

Remote control 7

Turning the Power ON/OFF 8

To turn the power on/off 8

Watching TV Programmes 9

To watch a TV Programme 9

Tuning in 10

To preset programmes

(Auto search) 10

To preset programmes(SEARCH) 12

MFT(Manual Fine Tuning) 14

To skip unnecessary programme numbers 15

To watch VIDEO 16

Selecting outside input 16

Enjoying Wide Picture 17

16:9 Screen 17

Convenient Picture and Sound Controls 18

Sound muting and on-screen recalling 18

Selectable picture 19

Selectable sound 22

Enjoying Stereo and Bilingual Broadcasts25

To select the stereo/bilingual mode 25

Using Other Menus 26

Clock on/off timer 26

Sleep time 27

To select the language of the on-screen display 28

To select the blue screen and auto volume 29

To connect Other machines such as VIDEO

Names and Functions of Connective

Terminals 30

Connecting VIDEO 31

Connecting with S picture VIDEO 32

Connecting with VIDEO CAMERA

(CAMCORDER) 33

Connecting with AUDIO SET 34

Recording TV 34

Broadcast Transmission Systems

in Each Country 35

Viewing Teletext/

Use of the Teletext Buttons 36

To view text 36

To adjust teletext characters quality 40

Specification 41

Table of contents

Safeguards

Water and Moisture : Never install the set in the following places : in the bathroom, in a wet basement.

Do not place any containers with liquid (e.g. flower vases) on the set.

Heat : Never place the set near heat sources(e.g. radiator).

Ventilation : Do not cover the ventilation openings in the cabinet.

Never place the set in a confined space such as a bookcase or built-in cabinet,

unless proper ventilation is provided.

Object Entry :Do not insert foreign objects, such as needles and coins, into the ventilation openings.

Lightning Strike : You should disconnect your set from the mains and the aerial system

during thunderstorms.

Cleaning : Unplug the set from the mains before cleaning.

- The appliance is not intended for use by young children or infirm persons without supervision;

- Young children should be supervised to ensure that they do not play with the appliance.

Features

INTRODUCTION

Installation

16:9 screen

You can select a desired 16:9 (wide screen) screen mode for movies as well as the normal 4:3 picture

mode.

A variety of AV terminals for external equipment connection.

●Two sets of video/audio inputs on the rear and one set on the side.

●S-VIDEO terminals.

●One set of monitor output terminals.

Selectable picture and selectable sound

Allows one-touch selection of your favorite picture quality and tone quality.

NICAM and German stereo/bilingual broadcasts receivable

Off-timer and On-timer

Turns off the TV automatically and will turn it back on at a preset time.

●INSTALL the unit in a room where direct light will not fall upon the screen.

Tonal darkness or a reflection on the picture screen may cause eyestrain. Soft and indirect lighting is

recommended for comfortable viewing.

●ALLOW enough space between the unit and the wall for proper ventilation.

●AVOID excessively warm locations to prevent possible damage to the cabinet or components.

●RATED VOLTAGE: 110-240V~, 50/60Hz

Automatic degaussing

All colour television receivers are sensitive to magnetic influences usually caused by either moving the

receiver from one place to another or using certain electrical appliances near the receiver. This residual

magnetism, as it is called, sometimes causes distortion which gives rise to“blotchy”areas of colour

in the picture. To avoid these effects, the receiver incorporates an automatic degaussing switch.

This circuit removes any residual magnetism in the metal parts of the picture tube and ensures that

each time the receiver is turned“ON”using the main switch, the purity of the colours displayed on the

screen remains true and lifelike. If the unit is moved or made to face a different direction, the main

switch must be off at least 30 minutes in order for the automatic degaussing circuit to operate properly.

INTRODUCTION

To connect the aerial

To prepare the remote control

Installation

Optimum reception of colour requires a good signal and will generally mean that an outdoor aerial must

be used. The exact type and positioning of the aerial will depend upon your particular area.

Notes

●When using an outdoor aerial, disconnect

the leads of the indoor aerial, if connected,

from the aerial terminal socket.

●It is recommended that the 75-ohm coaxial

cable be used to eliminate interference and

noise which may occur due to radio wave

conditions.

●The aerial cable should not be bundled with

the power cord and the like.

Using the ATT(attenuator) switch (See page 6)

When visual interference occurs, set the ATT switch to

ON using a small screwdriver.

Battery installation Tips for remote operation

Remove the battery cover.

Insert two size AA batteries matching the +/-

polarities of the battery to the +/- marks inside

the battery compartment. ●When the remote control will not be used for a

long period of time or when the batteries are

worn out, remove the batteries to prevent

leakage.

●Do not throw the batteries into a fire. Dispose

of used batteries in the specified manner.

●Do not drop, dampen or disassemble the

remote control.

Effective range

(3) VIDEO 3 input terminals

(S-VIDEO, VIDEO, AUDIO L, R)

Use this Jack when listening to the

sound outputted to the speaker with

the headphone.

Identification of controls

*The following describes the name of each part of the TV and remote control.

POWER indicatorON TIMER indicator

Main power switch

FRONT

ON/OFF

(1) Video 1 input terminals

(S-VIDEO, VIDEO, AUDIO L, R)

(2) Video 2 input terminals

(VIDEO, AUDIO L, R)

MONITOR output terminals

(VIDEO, AUDIO L, R)

ATT(Attenuator switch)

ATT ON

OFF Aerial input

TOP

BACK

Remote Control

OPERATE ON/OFF

SURROUND ON/OFF

(HOLD)

RECALL

(REVEAL)

ENTER (STORE)

DIGIT SELECT(BROWSE)

PR UP (PAGE UP)

VOLUME UP

(TV/TEXT)

SOUND MUTE

SELECTABLE

PICTURE

(CONTRAST MENU)

PR SELECT 0~9

(PAGE SELECTOR 0~9)

SLEEP TIME SELECT

(L/F/T)

SKIP ON/OFF

HEADPHONE

VOLUME UP

HEADPHONE

VOLUME DOWN

PR DOWN

(PAGE DOWN)

MENU (INDEX)

TV/VIDEO

INPUT SELECT

(MIX)

TIME DISPLAY

(SUBCODE)

SELECTABLE SOUND

(CANCEL)

STEREO/BILINGUAL

SELECT

(SIZE)

PICTURE SIZE SELECT

(RED, GREEN, YELLOW, CYAN)

TEXT use identified by ( )

To turn the power on/off

1. Press the main power switch.

The power indicator will light up red or amber.

In standby mode the power indicator will light up red.

2. If no picture appears, press the OPERATE,/,

▼/▲direct select buttons(0~9). By

pressing the

number(one digit only) where the programme you want to

watch is preset, you can turn on the set and select the

programme at the same time. When the TV is on, the power

indicator will light up amber.

* When the remote control is not at hand, you can turn

on the set by pressing the /or the PR▼/▲

buttons on the TV set.

3. Adjust the sound volume with the /buttons

on the receiver or remote control.

4. To switch to the standby mode, press the OPERATE

button. At the same time the power indicator will light up

red.

5. To turn off completely, press the main power switch. At

the same time the power indicator will turn off.

* If you don’t use the TV set for a long time, turn off

completely at the main power switch on the TV set.

This decreases unnecessary power consumption.

* When you turn off completely by using the main power

switch, Sleep Time and Timer setting are cleared.

Auto-power-off

If TV broadcast for a day is finished, the TV will

automatically turn off after about 15 minutes. However, if

the Off -time or Sleep time is operating, it takes precedence.

This Auto-Power-Off feature does not operate in the VIDEO

mode.

Last-Mode-Memory

Settings of picture and sound conditions and preset

programmes are stored in the memory even after turning off

the power, therefore, next time the power is turned on, the

system will function in the last setting modes.

// /

To turn the power on/off

Turning the Power ON/OFF

●The following describes how to turn the TV on/off using the

main switch and the remote control.

ON/OFF

To select a TV programme

1. Select the desired programme.

Using the direct select buttons

*To select a one-digit programme

number:

press the -/-- button to display

“-”, and 0~9 to select a

number.(0~9)

*To select a two-digit programme number : Press -/--

to display “--”and press 0~9 to select a

number.(10~99)

Using the PR down/up(PR▼/▲) buttons.

Press ▼to select lower programme numbers; ▲to

select higher ones.

2. Adjust the sound volume with the

/buttons.

If the colour or sound of a certain channel is abnormal

If the broadcast system setting is in

correct, the color or sound of a

certain programme will be

abnormal.

Press the menu button to select

BROADCAST SYSTEM in

FUNCTION display on the right.

For the systems in each country, refer to page 35.

*When the color of the picture is abnormal.

Select the COLOR with the PR▼/▲ buttons and select

the correct color system with the / buttons.

AUTO, PAL, SECAM, 4.43NTSC and 3.58NTSC will

appear cyclically.

When the color is abnormal, even though television is

AUTO set, select the correct color system. Refer to

broadcast transmission systems in the each country.

*When the sound of the picture is abnormal.

Select the SOUND with the PR▼/▲ buttons and select

the correct sound system with the / buttons.

AUTO, D/K, I, B/G and M will appear cyclically. When

the sound is abnormal, even though television is AUTO

set, select the correct sound system. Refer to

broadcast transmission systems in the each country.

*If the sound or picture of all programmes is abnormal, you

will preset the programmes using the AUTO SEARCH.

See page 10.

// /

To watch a TV Programme

Watching TV Programmes

●You can watch TV programmes being broadcast on the preset programme number.

BROADCAST SYSTEM

▶COLOR AUTO

SOUND AUTO

▼▲SELECT ◀▶CHANGE

EXIT

Inhaltsverzeichnis

Andere NEC Fernseher Handbücher

NEC

NEC FS-59T90 Bedienungsanleitung

NEC

NEC VT770 Series Bedienungsanleitung

NEC

NEC NLT-26HD1 Bedienungsanleitung

NEC

NEC FS-59V81S Bedienungsanleitung

NEC

NEC NLT-40HDEM2 Bedienungsanleitung

NEC

NEC PX-42VR5W Bedienungsanleitung

NEC

NEC AccuSync LCD22WMGX, AccuSync LCD24WMCX Bedienungsanleitung

NEC

NEC MultiSync LCD4020 Bedienungsanleitung

NEC

NEC E585 Bedienungsanleitung

NEC

NEC FS-5172 Bedienungsanleitung

NEC

NEC FS-8002 Bedienungsanleitung

NEC

NEC DSC-3261HA Bedienungsanleitung

NEC

NEC PF32W01 Bedienungsanleitung

NEC

NEC DSC-3261HA Bedienungsanleitung

NEC

NEC NLT-40FHD100 Bedienungsanleitung

NEC

NEC NLT-19HDB3 Bedienungsanleitung

NEC

NEC PXT-32XD3 Bedienungsanleitung

NEC

NEC DTE-29U1TH Bedienungsanleitung

NEC

NEC PV32-AVT Bedienungsanleitung

NEC

NEC PV46-AVT Bedienungsanleitung

NEC

NEC DTA-14V4THS Bedienungsanleitung

NEC

NEC FS-5170 Bedienungsanleitung

NEC

NEC PF32WT100 Bedienungsanleitung

NEC

NEC PF51T31 Bedienungsanleitung

Beliebte Fernseher Handbücher anderer Marken

Philips

Philips Colour Television Bedienungsanleitung

Toshiba

Toshiba 27A10 Bedienungsanleitung

Philips

Philips 42PF9630A/37 Bedienungsanleitung

Hitachi

Hitachi 32FX48B Bedienungsanleitung

DAEWOO ELECTRONICS

DAEWOO ELECTRONICS DTQ-14V1FC Bedienungsanleitung

Changhong Electric

Changhong Electric uhd55b6000is Bedienungsanleitung

Philips

Philips Matchline 21CE7551 Bedienungsanleitung

Panasonic

Panasonic Genus TX-G10 Bedienungsanleitung

Toshiba

Toshiba 19A20 Bedienungsanleitung

Philips

Philips 25PT4523-16 Bedienungsanleitung

Sony

Sony XBR-100Z9D Bedienungsanleitung

Philips

Philips PR0930X3 Bedienungsanleitung

Philips

Philips Brilliance 231P4QPY Bedienungsanleitung

Samsung

Samsung 55S9 B Series Bedienungsanleitung

Philips

Philips 32HF9385D Fehlerbehebungshandbuch

Sharp

Sharp LC-40FI5012E Bedienungsanleitung

Loewe

Loewe Table Stand Reference 55 Bedienungsanleitung

Philips

Philips 32PFH5300 Bedienungsanleitung