NetApp H600S Series Handbuch

H600S Series Storage Nodes

Installation and Setup Instructions

Prepare for installation |Stage 1

• Element Software documents

• End User License Agreement

• Hardware Universe (HWU)

• How to access BMC and change IP address on H610S

• NetApp SolidFire Resources page

• Rail Kit Installation

Access online

You provide

In the box

Conﬁgure the node Create a new cluster

4 5

Prepare for installation Install hardware Cable the node

1 2 3

Power cables

(Two per chassis)

Slide rail kit

H600S series storage node

Rack space

1U per chassis Monitor with a VGA connection

and keyboard with a

standard USB connection

Two cables with

RJ45 connectors for

cluster management

One cable with

RJ45 connector

for out-of-band

management

Two SFP28

or SFP+ cables Any operating system (OS)

client with a browser

215-14060_A0

1From a client on the same network as the newly conﬁgured node,

access the NetApp Element software UI by entering the node’s IP address.

2Enter the required information in the Create a New Cluster window.

See the NetApp Element Software Setup Guide for instructions. You can access the latest version

of the Setup Guide from the NetApp SolidFire Resources page.

Cable the node |Stage 3

Conﬁgure the node |Stage 4

Create a new cluster |Stage 5

1Install the rails.

2Install the chassis.

See Rail Kit Installation instructions.

LIFTING HAZARD

CAUTION

40.5 lb (18.4 kg)

Connect the node to a 1GbE network using two RJ45 connectors.

Connect the node to a 10/25GbE network using two SFP28 or SFP+ cables.

Connect the node to a 1GbE network using an RJ45 connector in the IPMI port.

Connect both power cables to the node.

Plug the power cables to a suitable power outlet.

Press the power button at the front of the chassis.

Note: It takes approximately ﬁve minutes and 30 seconds for the node to boot.

10/25GbE cables

1GbE cables

1GbE cable

Power cables

1Attach a keyboard and monitor to the node.

Note: Ensure that the node is powered on.

2In the terminal user interface (TUI) that is displayed,

conﬁgure the network and cluster settings

for the node by using the on-screen navigation.

Note: You must get the IP address of the node from the TUI. You need this in Stage 5.

After you save the settings, the node is in a pending state, and can be added to a cluster.

See the NetApp Element Software Setup Guide for conﬁguration instructions. You can

access the latest version of the Setup Guide from the NetApp SolidFire Resources page.

3Conﬁgure out-of-band management using the Baseboard Management Controller (BMC).

i. Use a web browser and navigate to the following IP address: 192.168.0.120

ii Log in using the following default credentials: User name: root Password: calvin

iii From the server management screen, select BMC Network Conﬁguration to conﬁgure the network parameters for the out-of-band management port.

See How to access BMC and change IP address on H610S.

FRONT

VIEW

REAR

VIEW

10/25GbE SFP+

or SFP28 cables

for iSCSI

1GbE RJ45 cable

for out-of-band

management

1GbE RJ45 cables

for management

Note:

• Ensure that you have installed the rack according to the safety instructions from the manufacturer.

• Ensure that the rack is stabilized. The heaviest equipment should be at the bottom of the rack.

• Follow proper grounding practices to avoid risk of electric shock.

• Follow proper airﬂow and cooling requirements to prevent hardware from overheating.

• A new chassis loaded with drives weighs 40.5 lb. Ensure that you have sucient manpower

to lift the chassis.

Install hardware |Stage 2

Inhaltsverzeichnis

Andere NetApp Lagerung Handbücher

NetApp

NetApp FAS2700 Series Handbuch

NetApp

NetApp AFF A700s Bedienungsanleitung

NetApp

NetApp FAS9500 Handbuch

NetApp

NetApp AFF A200 Bedienungsanleitung

NetApp

NetApp StorageGRID Webscale SG5700 Series Betriebsanleitung

NetApp

NetApp AltaVault Cloud Integrated Storage 4.1 Montage- und Wartungsanleitung

NetApp

NetApp FAS8300 Bedienungsanleitung

NetApp

NetApp FAS9000 Handbuch

NetApp

NetApp StorageGRID Webscale SG5700 Series Merkblatt

NetApp

NetApp FAS2020 Handbuch

NetApp

NetApp SolidFire C-Series Handbuch

NetApp

NetApp DS4486 Handbuch

NetApp

NetApp FAS8300 Handbuch

NetApp

NetApp DS4243 Montage- und Wartungsanleitung

NetApp

NetApp FAS8200 Series Bedienungsanleitung

NetApp

NetApp StorageGRID Webscale SG6000 Series Bedienungsanleitung

NetApp

NetApp AFF A400 Handbuch

NetApp

NetApp StorageGRID SD100 Bedienungsanleitung

NetApp

NetApp FAS500f Bedienungsanleitung

NetApp

NetApp E Series Bedienungsanleitung

NetApp

NetApp SG1000 Betriebsanleitung

NetApp

NetApp FAS9500 Merkblatt

NetApp

NetApp StorageGRID SG5600 Series Betriebsanleitung

NetApp

NetApp E Series Bedienungsanleitung

Beliebte Lagerung Handbücher anderer Marken

QNAP

QNAP TS 32PXU Series Bedienungsanleitung

LaCie

LaCie RUGGED RAID Bedienungsanleitung

Freecom

Freecom CLS DOCK Bedienungsanleitung

PNY

PNY Attache P-FD64MBATT3 Bedienungsanleitung

HP StorageWorks MSL2024 Bedienungsanleitung

OLT

OLT 6x6 Maximizer Bedienungsanleitung

Transcend

Transcend JetFlash 160 Bedienungsanleitung

LaCie

LaCie RUGGED MINI Bedienungsanleitung

Thunderbolt

Thunderbolt 600 Bedienungsanleitung

Panasonic

Panasonic LB-DH8 series Handbuch

Intel

Intel RAID High Availability Bedienungsanleitung

LaCie

LaCie 12big Thunderbolt 3 Bedienungsanleitung

Spectra Logic

Spectra Logic T-Series Spectra T50e Bedienungsanleitung

Panasonic

Panasonic LKM-F931-1 Bedienungsanleitung

Tabernus

Tabernus Enterprise Erase E2400 Bedienungsanleitung

Rocstor

Rocstor COMMANDER 3F series Bedienungsanleitung

HP P9000 Bedienungsanleitung

Western Digital

Western Digital Ultrastar Data60 Bedienungsanleitung