NetComm IN5699 Bedienungsanleitung

www.netcomm.com.au Rev.2 - YML609

Page 2 InModem56 V.92

Contents

What’s in the Box? ......................................................................................................... 3

Step 1 - Installing your Modem ...................................................................................... 3

Step 2 - Installing your Modem Driver ........................................................................... 4

Windows XP ............................................................................................................. 4

Windows 2000 ......................................................................................................... 5

Windows ME ............................................................................................................ 7

Windows 98/95 ........................................................................................................ 8

Step 3 - Installing your Software .................................................................................... 9

BitWare for Windows ............................................................................................... 9

Modem On Hold Software ....................................................................................... 9

Adobe Acrobat Reader ........................................................................................... 10

Step 4 - Registering your Modem ................................................................................. 11

Troubleshooting ........................................................................................................... 11

Contact Information ................................................................................................ 11

Your new InModem 56 V.92:

■Connects to the Internet faster - The InModem 56 V.92 cuts the time it takes to

connect by 40% or more.

■Uploads faster - The InModem 56V.92 can upload at speeds of up to 48,000 bps.

■Downloads faster - The InModem 56 V.92 uses new V.44 compression, which allows

you greater throughput for viewing HTML pages on the Internet.

■Receives and makes phone calls while connected to the Internet - Available with a

phone that has call waiting, the modem-on-hold feature of the InModem 56 V.92

allows you to receive incoming calls and make outgoing calls while remaining

connected to the Internet.

Note: To achieve a 56Kbps V.92 connection and utilise the other V.92 features

such as Caller ID, Modem On Hold & Call Waiting, your ISP must

support and enable the V.92 Standard. If a V.92 connection is not

available, this product will revert to a 56K V.90 mode.

Rev.2 - YML609 www.netcomm.com.au

InModem56 V.92 Page 3

Thank you for purchasing a genuine NetComm product.

Follow the steps in this Quick Start Guide to correctly install your InModem56 V.92 and

begin data, fax and voice communications.

What’s in the Box?

■NetComm InModem 56 V.92 ( IN5699_4)

■RJ-11 Telephone cable

■Quick Start User Guide

■NetComm Driver CD

■NetComm Product CD

Your NetComm Driver CD contains all the drivers, manuals and software that you will

need to fully utilise your NetComm InModem56.

CAUTION

This device should be fitted and

installed under normal operation.

Any damage caused by

abnormal installation or operation

is not included in the

manufacturer’s warranty.

NOTE: Do not force it.

1. Ensure the computer is shut down

correctly, with the power off and the

power cable unplugged, before

beginning installation of your

InModem56.

2. Take the cover off the CPU (central

processing unit) and carefully slip the

modem into the appropriate vacant

PCI slot. Ensure the “golden edge” of

the modem card is correctly

positioned so it easily fits into a PCI

slot.

Step 1 - Installing your Modem

To install the NetComm InModem 56 V.92 into your computer, you may wish to refer to

the user’s manual for your computer and follow the instructions below.

www.netcomm.com.au Rev.2 - YML609

Page 4 InModem56 V.92

3. Push the Modem card down firmly so

it is seated all the way to the bottom

of the PCI slot.

4. Plug one end of the RJ-11 telephone

cable (supplied with the modem) into

the line in the jack socket on the back

plate of the modem. Plug the other

end of the cable into the Wall jack

socket. If you wish to run a normal

telephone from the same line, plug

your telephone into the Telecom

Extension Socket.

5. Reassemble your computer case.

Connect the power cable and start

your computer. The hardware

installation is complete.

Step 2 - Installing your Modem Driver

Start your computer and, once fully booted, insert the NetComm Driver CD into your

CD-ROM drive. Refer to the appropriate section relating to your operating system to

continue.

Windows XP

The Windows XP operating system will

automatically install a generic modem

driver after you turn on your computer.

You will then need to install the correct

NetComm modem driver from the

NetComm Driver CD.

1. Go to the “Start” button in the right-

bottom corner of the screen. Select

“All Programs” and then “Run”.

2. Type in the location of the driver

“D:\Drivers\IN5699_4\setup.exe” file

on the Driver CD in the CD-ROM

drive where D:\ is the letter of your

CD-ROM drive. Click “OK”.

Rev.2 - YML609 www.netcomm.com.au

InModem56 V.92 Page 5

3. Click “OK” to continue.

4. Windows will install the InModem 56

driver.

5. Windows will indicate the modem

driver has not passed “Windows

Logo testing”. Click “Continue

anyway”.

6. Your modem driver is installed. You

will now need to restart your

computer to complete the installation.

Windows 2000

1. The “Found New Hardware Wizard”

automatically recognises new

hardware added in a Plug and Play

system when your computer is

restarted.

Click “Cancel” and install the software

as indicated below.

2. Go to the “Start” button in the right-

bottom corner of the screen. Select

“Run”.

www.netcomm.com.au Rev.2 - YML609

Page 6 InModem56 V.92

3. Type in the location of the driver

“D:\Drivers\IN5699_4\setup.exe” file

on the Driver CD in the CD-ROM

where D:\ is the letter of your CD-

ROM drive. Click “OK”.

4. Click “OK” to continue.

5. Windows will install the InModem 56

driver.

6. Windows will indicate the modem

driver does not contain a “Microsoft

digital signature”. Click “Yes” to

continue.

7. Windows will continue installing the

InModem 56 driver.

8. Your modem driver is installed. You

will now need to restart your

computer to complete the installation.

Rev.2 - YML609 www.netcomm.com.au

InModem56 V.92 Page 7

Windows ME

The Windows ME operating system will

automatically install a generic modem

driver after you turn on your computer.

You will then need to install the correct

NetComm modem driver from the

NetComm Driver CD.

1. Go to the “Start” button in the right-

bottom corner of the screen. Select

“Run”.

3. Click “OK” to continue the

installation.

4. Windows will install the InModem 56

driver.

5. Your modem driver is installed. You

will now need to restart your

computer to complete the installation.

2. Type in the location of the driver

“D:\Drivers\IN5699_4\setup.exe” file

on the Driver CD in the CD-ROM

drive where D:\ is the letter of your

CD-ROM drive. Click “OK”.

www.netcomm.com.au Rev.2 - YML609

Page 8 InModem56 V.92

Windows 98/95

1. The “Add New Hardware Wizard”

automatically recognises new

hardware added in a Plug & Play

system once your computer is

restarted. Click “Cancel” and install

the software as indicated below.

2. Go to the “Start” button in the right-

bottom corner of the screen. Select

“Run”.

3. Type in the location of the driver

“D:\Drivers\IN5699_4\setup.exe” file

from the Driver CD where D:\ is the

letter of your CD-ROM drive. Click

“OK”.

4. Click “OK” to continue.

5. Click “OK”. Windows will install the

InModem56 driver.

6. Your modem driver is installed. You

will now need to restart your

computer to complete the installation.

Rev.2 - YML609 www.netcomm.com.au

InModem56 V.92 Page 9

Step 3 - Installing your Software

Now that you have installed your new NetComm modem and its drivers, you will need

to install software to make your InModem 56 V.92 a complete communications solution.

Your NetComm Driver CD contains BitWare for Windows - Voice, Fax and Data

software, Modem On Hold software, and Adobe Acrobat Reader to view the manuals

included in the Manuals directory of the CD.

BitWare for Windows

To install your Facsimile, Answering Machine and Speakerphone software:

1. Go to the “Start” button in the right-bottom corner of the screen. Select “Run”.

2. Click on “Browse...” and go to “D:\Software\Bitware\disk1\setup.exe” where D:\ is

the letter of your CD-ROM drive.

3. Click “OK” and the software installation screen will appear. Follow the screen

instructions to install the software. A copy ofthe BitWare User Guide is available in

Adobe Acrobat format in “D:\Manuals\Bitware” where D:\ is the letter of your CD-

ROM drive.

Note: You will need to install Adobe Acrobat Reader software to view the

software and modem manuals included in the Manuals directory.

Modem On Hold Software

To install your Modem on Hold software:

1. Go to the “Start” button in the right-bottom corner of the screen. Select “Run”.

2. Click on “Browse...” and go to “D:\Drivers\IN5699_4\V_92 MOH\LtMoh.exe” where

D:\ is the letter of your CD-ROM drive.

3. Click “OK” and the software installation screen will appear. Follow the screen

instructions to install the software. A copy ofthe Modem On Hold User Guide is

available in Adobe Acrobat format in “D:\Manuals\IN5699_4\V_92 MOH” where

D:\ is the letter of your CD-ROM drive.

Note: You will need to install Adobe Acrobat Reader software to view the

software and modem manuals included in the Manuals directory.

www.netcomm.com.au Rev.2 - YML609

Page 10 InModem56 V.92

Adobe Acrobat Reader

To install your Adobe Acrobat Reader software:

1. Go to the “Start” button in the right-bottom corner of the screen. Select “Run”.

2. Click on “Browse...” and go to “D:\Software\Acrobat\Win32\ar40eng.exe” where D:\

is the letter of your CD-ROM drive.

Note: You will need to select the Linux, Win16 or Win32 directory depending

on the Operating System you are using. For example, if your operating

system Windows 95/98/2000/NT/ME/XP you will use the “Win32”

version. If you are using Windows for Workgroups or Windows 3.X you

will need to use the “Win16” version.

3. Click “OK” and the software installation screen will appear. Follow the screen

instructions to install the software. A copy ofthe Adobe Acrobat User Guide is

available in “D:\Manuals\Acrobat” where D:\ is the letter of your CD-ROM drive.

Andere Handbücher für IN5699

Inhaltsverzeichnis

Andere NetComm Modem Handbücher

NetComm

NetComm Smart Modem SM5695 Bedienungsanleitung

NetComm

NetComm NB1300 Bedienungsanleitung

NetComm

NetComm NB5PLUS4W Bedienungsanleitung

NetComm

NetComm NB16WV-02 Bedienungsanleitung

NetComm

NetComm AM5065 Bedienungsanleitung

NetComm

NetComm NB5580W Bedienungsanleitung

NetComm

NetComm NF18ACV Sicherheitsleitfaden

NetComm

NetComm NTC-4000 series Bedienungsanleitung

NetComm

NetComm NP7042 Bedienungsanleitung

NetComm

NetComm NTC-100 Bedienungsanleitung

NetComm

NetComm NTC-100 Bedienungsanleitung

NetComm

NetComm AM5066 Bedienungsanleitung

NetComm

NetComm CD2004 Mega-i-Modem Bedienungsanleitung

NetComm

NetComm AM5056 Bedienungsanleitung

NetComm

NetComm NB16WV Installationsanleitung

NetComm

NetComm AM5066 Bedienungsanleitung

NetComm

NetComm Vodafone MachineLink 3G Bedienungsanleitung

NetComm

NetComm NF18MESH Bedienungsanleitung

NetComm

NetComm CD2004 Mega-i-Modem Bedienungsanleitung

NetComm

NetComm NB1200 Bedienungsanleitung

NetComm

NetComm NB1300 Bedienungsanleitung

NetComm

NetComm NF17ACV Bedienungsanleitung

NetComm

NetComm NB1300Plus4 Bedienungsanleitung

NetComm

NetComm NB3 Bedienungsanleitung

Beliebte Modem Handbücher anderer Marken

Davicom

Davicom DM562AP Bedienungsanleitung

EpiValley

EpiValley TATA indicom SXC-1080 Bedienungsanleitung

Zte

Zte WiMAX Bedienungsanleitung

Intelimax

Intelimax MA-2060 Bedienungsanleitung

SMC Networks

SMC Networks D3CM1604V Gebrauchs- und Pflegehandbuch

Telstra

Telstra Wi-Fi 4G Advanced Pro X Bedienungsanleitung

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Bedienungsanleitung

Samsung

Samsung AceLink SAM-335A Bedienungsanleitung

Enfora

Enfora Enabler-G Kurzanleitung zur Einrichtung

iRZ

iRZ ATM2-232 Bedienungsanleitung

Zhone

Zhone 6310 Bedienungsanleitung

Paradyne

Paradyne Hotwire 7976 Bedienungsanleitung

US Robotics

US Robotics 3453C Bedienungsanleitung

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Bedienungsanleitung

Zte

Zte MF823 Bedienungsanleitung

Four-Faith

Four-Faith F1403 Bedienungsanleitung

Sierra Wireless

Sierra Wireless AIRLINK MP595W Bedienungsanleitung

Gemtek

Gemtek WiMAX WIXFBR-103 Bedienungsanleitung