NetComm NTC-4000 series Bedienungsanleitung

NetCommWireless

Quick Start Guide

NTC-4000 Series -

M2M Intelligent Serial Router

| Wireless M2M

NetCommWireless

Quick Start Guide

This guide covers the NTC-4000 Series M2M WiFi Rotuers. This guide

provides a series of step by step instructions to ensure the conguration

of your router goes as smoothly as possible.

Please check that you have received all the items in your package:

The NTC-4000 series package consists of:

NTC-4000 Series Modem Device

RS-232 Data/Power Cable 1m

SMA Antenna

Mounting bracket

Quick Start Guide

If any of these items are missing, please contact NetComm Wireless

Technical Support.

Reset

Button

SIM card Tray

Cellular Data LED

Power LED

RJ-45 port

(serial RS-232 data and

DC power input)

Mini

USB port SMA

antenna

connector

| Wireless M2M

NTC-4000 Series - M2M Intelligent Serial Router

Installing your Router

Inserting the SIM card

Please ensure that the NTC-4000 is not connected to the power

cable before proceeding.

Push the small yellow button besides the SIM card holder.

Insert the SIM card into the holder with the SIM conductor pins

facing up.

| Wireless M2M

NetCommWireless

Insert the SIM card holder with the SIM conductor pins facing

down into the NTC-4000.

| Wireless M2M

NTC-4000 Series - M2M Intelligent Serial Router

Connecting the Data/

Power cable

Connect the included antenna to the SMA connector of the

NTC-4000.

Plug the included RS-232 data/power cable into the RJ-45

socket of the NTC-4000 and then plug the serial port (DB9) end

of the same cable into the COM port of the device you would like

to connect to.

Connect a compatible power adapter to the DC power jack

(2.1mm barrel) of the RS-232 data/power cable and then plug the

power adapter into a power outlet.

WARNING

Please note: It is not possible to utilise the mini-USB and Serial connection concurrently.

Make sure any open connection on the Serial port is disabled before connecting via the

mini-USB cable.

| Wireless M2M

NetCommWireless

Connecting via mini USB

Please refer to the NTC-4000 Series User Manual for instructions on

utilising the mini USB connection.

Please note: The mini USB cable is not supplied with the NTC-4000 Series.

| Wireless M2M

NTC-4000 Series - M2M Intelligent Serial Router

Communicating with the

NTC-4000 Series

Any terminal emulator can be utilised to facilitate communication

to the NTC-4000 Series. In the example below, HyperTerminal from

Windows XP is shown.

Click on the Start button and then navigate to the Accessories

item and then Communications.

Click on the HyperTerminal item.

Enter a name for the connection prole (for example: NTC-4000)

and click OK.

On the Connect to window, select the COM port the NTC-4000

Series is connected to in the Connect using dropdown menu.

| Wireless M2M

NetCommWireless

On the COM port settings window that appears, select 115200 in

the Bits per second dropdown menu.

The terminal window should then display indicating a connection is

open to the NTC-4000 Series. This can be tested by entering the

command at+i and receiving the response I/OK as shown below:

You can now use the enhanced AT command set to congure

or perform tasks on the NTC-4000 Series. Please refer to the AT

Command Set guide for more information on the functions available.

If you are unable to type at+i, check that you have selected the correct

COM port to attempt to connect on. This should be the physical COM

port with the supplied DB-9 cable attached.

| Wireless M2M

NTC-4000 Series - M2M Intelligent Serial Router

AT Commands

Please refer to the AT Command Set guide available from the Downloads

tab at: www.netcommwireless.com/product/m2m/ntc-4000

This guide contains a full list of the supported AT Commands available

with the NTC-4000 series.

| Wireless M2M

NetCommWireless

Mounting Options

The NTC-4000 series modem can be mounted on the wall or a DIN rail

by using the mounting bracket. The mounting bracket is made from

polyamide, which is a exible material.

Mounting the NTC-4000 series modem is as simple as bending the

mounting bracket to snap into place on the Type-O (Top Hat) DIN rail.

This holds the NTC-4000 series modem in place securely.

Alternatively, the mounting bracket can be screwed onto a wall to

provide a permanent xture.

DIN rail mounting

The NTC-4000 Series mounting bracket has been designed to t a TS

35 Type-O DIN rail with a 25mm core.

Bend / Flex the mounting bracket at the bend line so that

the ridges are able to hold onto the DIN rail edges as per

the diagram above. You also have the option of securing the

mounting backet further by screwing it into place on the rail.

DIN Rail

Andere Handbücher für NTC-4000 series

Inhaltsverzeichnis

Andere NetComm Netzwerk-Router Handbücher

NetComm

NetComm RTA100 Bedienungsanleitung

NetComm

NetComm NTC-140W Series Bedienungsanleitung

NetComm

NetComm CallDirect NTC-6908 Bedienungsanleitung

NetComm

NetComm NB9WMAXX Bedienungsanleitung

NetComm

NetComm LIBERTY SERIES Bedienungsanleitung

NetComm

NetComm Smart Hub 4G Bedienungsanleitung

NetComm

NetComm NB14 Bedienungsanleitung

NetComm

NetComm 3G15Wn Bedienungsanleitung

NetComm

NetComm NB6PLUS4WN Bedienungsanleitung

NetComm

NetComm G.SHDSL 4-port Security Modem Routers NB712 Bedienungsanleitung

NetComm

NetComm NTC-6000 SERIES Bedienungsanleitung

NetComm

NetComm NB4 Bedienungsanleitung

NetComm

NetComm NTC-6200-01 Bedienungsanleitung

NetComm

NetComm NB1 Bedienungsanleitung

NetComm

NetComm NB5PLUS4W Kurzanleitung

NetComm

NetComm NB6 Bedienungsanleitung

NetComm

NetComm NP2005HS Bedienungsanleitung

NetComm

NetComm NTC-220 Bedienungsanleitung

NetComm

NetComm NB4 Bedienungsanleitung

NetComm

NetComm 3GM1WN Bedienungsanleitung

NetComm

NetComm NB9WMAXX Bedienungsanleitung

NetComm

NetComm NB6PLUS4W Bedienungsanleitung

NetComm

NetComm NB16WV Bedienungsanleitung

NetComm

NetComm NP5410 Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise