NetComm XBox NF1901ACV Bedienungsanleitung

XBox Setup Guide

NF1901ACV FAQs

NF1901ACV FAQs –XBox Setup Guide

1 of 7

FQ01128 v. 1.1 March 2019

XBox Setup Overview

There are two ways of allowing your XBox to communicate with the internet. One is through port forwarding and

the other is through the DMZ feature.

Port forwarding will enable specified ports on the NL1901ACV to get access to your XBox to communicate with the

internet as if they were directly connected by allowing access through.

Setting your XBox as a DMZ host opens all the ports on the NL1901ACV to allow access to a designated device.

This guide has been revised to include the latest changes and updates from the NL1901ACV's new NC2 web user

interface.

Prerequisite

Before you configure the NL1901ACV, you will need to set a static IP address on your XBox.

Please follow the instructions at the link below to set a static IP address on your XBox:

https://portforward.com/networking/static-ip-XBox-one/

You can use an IP address like 192.168.20.100 for example.

Important information

•You can only forward a port to one location (IP address).

•In some cases, this may cause issues when multiple LAN devices (computers, game consoles, or VOIP ATAs) attempt to use

online gaming at same time or make multiple VOIP service connections.

•In these cases, you would need to use an alternate port for any subsequent connections after the first device.

•Please consult your VOIP provider or game manufacturer for assistance with this.

NF1901ACV FAQs –XBox Setup Guide

2 of 7

FQ01128 v. 1.1 March 2019

Setting the XBox as the DMZ Host

Connect a computer and the NF18ACV using an Ethernet cable. (A yellow Ethernet cable was provided with your

NL1901ACV).

1Open a web browser (such as Google Chrome or Mozilla Firefox), type following address into the address

bar and press Enter.

http://192.168.20.1

2Enter the following credentials in the User Name and Password fields:

User Name: admin

Password: The serial number found on the label on the back of the device

3Click the OK/Log In button.

Note –If no authentication prompt is displayed or you see a request time out message, refer to the What if I cannot access Web User

Interface guide from FAQs section.

NF1901ACV FAQs –XBox Setup Guide

3 of 7

FQ01128 v. 1.1 March 2019

Set the DMZ Host

1Select the Advanced Setup menu at the left of the page, then click on NAT options and then click on DMZ

Host options:

2Enter the static IP address of the XBox in the DMZ Host IP Address field.

In this example, 192.168.20.100 is the IP address of the XBox.

3Click on the Save/Apply button

4Reboot the modem: Click Management menu on the left-hand side of the page then click Reboot options:

5Click the Reboot button.

NF1901ACV FAQs –XBox Setup Guide

4 of 7

FQ01128 v. 1.1 March 2019

Add Port Forwarding Rules for XBox

1Open a web browser (such as Google Chrome or Mozilla Firefox), type following address into the address

bar and press Enter.

http://192.168.20.1

2Enter the following credentials in the User Name and Password fields:

User Name: admin

Password: The serial number found on the label on the back of the device

3Click the OK/Log In button.

4Port 80 is also used to access webpage of the NL1901ACV so it needs to be re-configured.

It is recommended to change the webpage port number to 8000 as described below.

(Remember that from now onwards you can only access the webpage with port 8000.)

NF1901ACV FAQs –XBox Setup Guide

5 of 7

FQ01128 v. 1.1 March 2019

5Click the Save/Apply button.

6Open a web browser (such as Internet Explorer, Google Chrome or Firefox), type http://192.168.20.1:8000

into the address bar and press enter.

7Click on the Advanced Setup at the left of the page, then click on NAT option and then click Virtual Servers

options.

8Click the Add button to add a new port forwarding rule.

9Check that the interface currently selected in the Use Interface field is correct.

10 Choose the Use Interface from the drop-down menu as either ADSL / VDSL / or ETH WAN depending on

your connection type for internet.

11 To create your own defined port forwarding rule, select the Custom Service field and give the port forwarding

rule a unique name.

This example uses Gaming Console.

12 Enter the IP address of the XBox that you wish to port forward to in the Server IP Address field.

NF1901ACV FAQs –XBox Setup Guide

6 of 7

FQ01128 v. 1.1 March 2019

In this example, the IP address of the XBox is 192.168.20.100

13 Enter the port number or port range into the External Port Start and External Port End fields.

Note that the Internal Port Start and Internal Port End fields will automatically populate with the same port

numbers.

14 Select the Protocol to be used for the port forwarding rule. Options include TCP, UDP or TCP/UDP for both.

Ports and protocols

The ports and protocols for XBox are as follows:

XBox 360

http://support.XBox.com/en-AU/XBox-360/networking/network-ports-used-XBox-live

P R O T O C O L

P O R T N U M B E R

TCP and UDP

TCP

UDP

TCP and UDP

3074

XBox one

http://support.XBox.com/en-AU/XBox-one/networking/network-ports-used-XBox-live

P R O T O C O L

P O R T N U M B E R

TCP and UDP

TCP

UDP

500

TCP and UDP

3074

UDP

3544

UDP

4500

15 Click the Apply/Save button.

NF1901ACV FAQs –XBox Setup Guide

7 of 7

FQ01128 v. 1.1 March 2019

16 The port forwarding rules will now be displayed as the example above shows.

17 You must now reboot the modem. Select the Management menu on the left-hand side of the page then

click its Reboot option.

18 And then click the Reboot button.

Important information

•You can only forward a port to one location (IP address).

•In some cases, this may cause issues when multiple LAN devices (computers, game consoles, or VOIP ATAs) attempt to use

online gaming at same time or make multiple VOIP service connections.

•In these cases, you would need to use an alternate port for any subsequent connections after the first device.

•Please consult your VOIP provider or game manufacturer for assistance with this.

Inhaltsverzeichnis

Andere NetComm Netzwerk-Router Handbücher

NetComm

NetComm V200 Bedienungsanleitung

NetComm

NetComm NTC-6000 SERIES Bedienungsanleitung

NetComm

NetComm NWL-15 Bedienungsanleitung

NetComm

NetComm NB1300 Montage- und Wartungsanleitung

NetComm

NetComm HSPA+ M2M Bedienungsanleitung

NetComm

NetComm V100 Bedienungsanleitung

NetComm

NetComm NB604N Bedienungsanleitung

NetComm

NetComm NTC-6200-01 Bedienungsanleitung

NetComm

NetComm NB6PLUS4WN Bedienungsanleitung

NetComm

NetComm NTC-4000 series Bedienungsanleitung

NetComm

NetComm NTC-40WV Bedienungsanleitung

NetComm

NetComm NB4 Bedienungsanleitung

NetComm

NetComm N3G007W Bedienungsanleitung

NetComm

NetComm NTC-400 Series Bedienungsanleitung

NetComm

NetComm NWL-11 Bedienungsanleitung

NetComm

NetComm 3G27WV-R Bedienungsanleitung

NetComm

NetComm NB4 Bedienungsanleitung

NetComm

NetComm Dynalink MyZone 3G24W Bedienungsanleitung

NetComm

NetComm NB6Plus4 Bedienungsanleitung

NetComm

NetComm NTC-6000 SERIES Bedienungsanleitung

NetComm

NetComm NF4V Bedienungsanleitung

NetComm

NetComm NB5PLUS4 Bedienungsanleitung

NetComm

NetComm 3G42W-M Bedienungsanleitung

NetComm

NetComm NP5410 Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise