NETGEAR FVS336Gv1 - ProSafe Dual WAN Gigabit... Bedienungsanleitung

Version 1.0

How to create an SSL VPN portal on the FVS336G and have full VPN or VPN

Port Forwarding access to resources on the Local Network

This document describes the steps to undertake in configuring the FVS336G SSL VPN option.

The FVS336G’s SSL VPN portal can provide two levels of SSL service to the remote user:

• VPN Tunnel

The FVS336G can provide the full network connectivity of a VPN tunnel using the remote

user’s browser in the place of a traditional IPsec VPN client.

• Port Forwarding

Port Forwarding is a web-based client that installs transparently and then

create a virtual, encrypted tunnel to the remote network. No routing is involved and a Custom port

needs to be setup up for each Application that needs to be accessed (similar to an Inbound

firewall rule.

172.22.109.3

RDP Enabled

Internet connection through modem/router

SSL VPN Clients

192.168.120.x/24

LAN IP: 172.22.109.1

SSL VPN Tunnel or Port Forwarding

Version 1.0

Table of Contents

Create a new SSL Portal ................................................................................................ 3

Create a new Domain and associate it to the new SSL Portal Layout.................... 3

Create new Group(s), associate it with an existing Domain...................................... 4

Configure the SSL VPN client settings......................................................................... 5

Connecting and testing the SSL VPN........................................................................... 5

Connecting and testing Port Forwarding...................................................................... 7

Version 1.0

Create a new SSL Portal

Go to VPN, SSL VPN, Portal Layout

Click on Add

NOTE: By default the SSL-VPN portal exists

on the configuration and cannot be deleted

Set all the relevant details including

whether the Portal will display only the

VPN Tunnel page and/or Port Forwarding

(this will become clearer later)

Click on Apply

A new entry will be displayed in the Portal

Layouts summary page

(in this case VPNTest and the portal URL

https://172.22.109.109/portal/VPNTest)

Create a new Domain and associate it to the new SSL Portal Layout

Go to Users, Domain

Click on Add

Version 1.0

Set a name for the Domain, choose the

Authentication type and select the relevant

portal name (in our scenario VPNTest)

Click on Apply

A new entry will appear in the list of

Domains

Create new Group(s), associate it with an existing Domain

Go to Users, Groups

Set the Group name in the Add New

Group section, and the Domain the group

will be associated with

Click on Add

The new group will appear in the List of

groups

NOTE: Existing users cannot be moved into a

new Group. The group will need to be created

first and then when creating the user(s) the

relevant group should be selected

(see procedure following)

Create new User(s) and associate it with a Group

Go to Users, Users

Click on Add

NOTE: By default the guest and admin user

appear in this page and cannot be removed.

Version 1.0

Create each user selecting SSL VPN

User as the User Type and

VPNTestGroup as the Group

Click on Apply

Repeat the process for each new user

The list of new Users is displayed

NOTE: By default the only Groups appearing

in the Select Group list are the Domains.

Create a new Group using the relevant

procedure for this to appear in the selection.

Configure the SSL VPN client settings

Go to VPN, SSL VPN, SSL VPN Client

Enable Full tunnel support

Configure the DNS server settings (if

required) and the VPN clients range

Click on Apply

NOTE:

Enable Full Tunnel Support: check this to

enable full tunnel support; otherwise the

default is a split tunnel and appropriate client

routes must be added

Connecting and testing the SSL VPN

Go to Monitoring, Router status

Identify the WAN IP address that will be

used to connect to the FVS336G from the

Internet (in this scenario 83.71.251.27)

NOTE: Please ensure that the Modem/Router

sitting between the FVS336G and the Internet

is set to forward TCP port 443 to the FVS336G

Version 1.0

Replace the LAN address in the Portal

Layout address with the WAN address

Use the browser to connect from a PC on

the Internet to

https://83.71.251.27/portal/VPNTest

and that would be associated to the

VPNTest domain (whether part of a

group or not)

In the VPN Tunnel section click on the

icon above Connect using VPN Tunnel

The first time the connection is made a

banner will appear under the browser

Address bar –Install the Active X control

as shown and OK any subsequent dialog

box

After the Active X control is installed the

VPN tunnel can be establised

Click on the Connect using a VPN

Tunnel

The VPN Tunnel Adapter will be installed

and the VPN tunnel established

Version 1.0

When the tunnels is fully established the

following icon will be

appearing in the systray

Any resource available and attached to

the same LAN as the FVS336G should

now be accessible

In our example a PC on IP address

172.22.109.3 on the LAN of the FVS336

has been enabled for Remote Desktop

The Remote PC responds correctly over

the VPN prompting the customer for

Username and Password

Connecting and testing Port Forwarding

In order to test Port forwarding this must

be setup first. In this scenario RDP will be

tested through Port Forwarding port 3389

(RDP) to 172.22.109.3

Go to VPN, SSL VPN, Port Forwarding

and create/add a new application for

172.22.109.3 and TCP Port 3389 (RDP)

Version 1.0

Connect to the VPN portal and select the

Port Forwarding Tab

Click on the Connect using Port

Forwarding Icon

Once port forwarding is established the

window on the right will briefly appear and

then disappear (this can be retrieved by

clicking on the Icon in the systray

Also the icon in the systray

will confirm that Port forwarding is

established

Open Remote Desktop connection and

connect to 172.22.109.3

As per test with the SSL VPN the user

should be prompted to enter the

Credentials on the remote PC

Version 1.0

Double-clicking on the Port Forwarding

Icon in the systray , the open connection

will also be visible in the Pending

Connections section

Andere Handbücher für FVS336Gv1 - ProSafe Dual WAN Gigabit...

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere NETGEAR Firewall Handbücher

NETGEAR

NETGEAR ProSafe FVX538 Bedienungsanleitung

NETGEAR

NETGEAR FVX538v2 - ProSafe VPN Firewall Dual WAN Bedienungsanleitung

NETGEAR

NETGEAR FVS336Gv2 - ProSafe Dual WAN Gigabit... Bedienungsanleitung

NETGEAR

NETGEAR FVS338 - ProSafe VPN Firewall 50 Router Montage- und Bedienungsanleitung

NETGEAR

NETGEAR FVS328 - ProSafe VPN Firewall Bedienungsanleitung

NETGEAR

NETGEAR FVG318 - ProSafe 802.11g Wireless VPN Firewall 8... Technisches Datenblatt

NETGEAR

NETGEAR FVS338 - ProSafe VPN Firewall 50 Router Bedienungsanleitung

NETGEAR

NETGEAR ProSafe FR328S Bedienungsanleitung

NETGEAR

NETGEAR FVS338 - ProSafe VPN Firewall 50 Router Bedienungsanleitung

NETGEAR

NETGEAR ProSafe FVS318N Bedienungsanleitung

NETGEAR

NETGEAR FVS338 - ProSafe VPN Firewall 50 Router Bedienungsanleitung

NETGEAR

NETGEAR FVS338 - ProSafe VPN Firewall 50 Router Bedienungsanleitung

NETGEAR

NETGEAR ProSafe FVS318N Bedienungsanleitung

NETGEAR

NETGEAR FVS336G - ProSafe Dual WAN Gigabit Firewall Bedienungsanleitung

NETGEAR

NETGEAR ProSafe VPN Firewall 200 FVX538 Bedienungsanleitung

NETGEAR

NETGEAR ProSafe FR114W Bedienungsanleitung

NETGEAR

NETGEAR FVS318G - ProSafe Gigabit VPN Firewall Data Sheet... Bedienungsanleitung

NETGEAR

NETGEAR FVS336G - ProSafe Dual WAN Gigabit Firewall Bedienungsanleitung

NETGEAR

NETGEAR STM150 - ProSecure Web And Email Threat Management... Bedienungsanleitung

NETGEAR

NETGEAR FVS336G - ProSafe Dual WAN Gigabit Firewall Bedienungsanleitung

NETGEAR

NETGEAR FVS328 - ProSafe VPN Firewall Bedienungsanleitung

NETGEAR

NETGEAR FVG318 - ProSafe 802.11g Wireless VPN Firewall 8... Bedienungsanleitung

NETGEAR

NETGEAR FVS318G-100NAS Bedienungsanleitung

NETGEAR

NETGEAR FWG114Pv1 - Wireless Firewall With USB Print... Bedienungsanleitung

Beliebte Firewall Handbücher anderer Marken

Cisco

Cisco S190 Bedienungsanleitung

Fortinet

Fortinet FortiGate Voice Series Bedienungsanleitung

ADTRAN

ADTRAN NetVanta 2300 Bedienungsanleitung

SecureLogix

SecureLogix ETM System Bedienungsanleitung

Lanner

Lanner FW-8877 Bedienungsanleitung

Huawei

Huawei USG6000 Series Installations- und Betriebshandbuch

H3C

H3C SecPath F5000-AI-15 Bedienungsanleitung

Nexcom

Nexcom DNA 1150 Bedienungsanleitung

Fortinet

Fortinet FortiGate-60 series Bedienungsanleitung

Cisco

Cisco 3110 Handbuch

Draytek

Draytek Vigor2860 Series Bedienungsanleitung

Lanner electronics

Lanner electronics FW-7650 Series Bedienungsanleitung

Swisscom

Swisscom Internet Backup Bedienungsanleitung

SonicWALL

SonicWALL NSa 5700 Bedienungsanleitung

DPtech

DPtech FW1000 SERIES Bedienungsanleitung

FEITIAN

FEITIAN MultiPass FIDO Bedienungsanleitung

EBLOCKER

EBLOCKER PRO Bedienungsanleitung

GTA

GTA GB-200 Bedienungsanleitung