NETGEAR CM1000v2 Bedienungsanleitung

Quick Start

Ultra-High Speed Cable Modem

Model CM1000v2

Package Contents

Cable modem

Ethernet cable

Power adapter

Connect a Router

After you set up your cable modem and activate your Internet service, you can

disconnect the computer and connect a router to the cable modem.

To connect a router to the cable modem:

1. Reboot the cable modem by unplugging the power cable from the

cable modem and plugging it back in.

2. Wait for the Online LED to stop blinking and light solid green.

3. Use an Ethernet cable to connect the Ethernet port on the cable modem to

the WAN or Internet port on the router.

4. Power on the router.

5. Wait until the router is ready.

6. Connect a computer to the router.

For more information about how to set up your router, see the documentation

that came with your router.

Support

Thank you for purchasing this NETGEAR product. You can visit

https://www.netgear.com/support to register your product, get help, access the

latest downloads and user manuals, and join our community. We recommend that

you use only ofﬁcial NETGEAR support resources.

For regulatory compliance information, visit

https://www.netgear.com/about/regulatory/.

See the regulatory compliance document before connecting the power supply.

Customer-owned cable modems might not be compatible with certain cable

networks. Check with your cable Internet provider to conﬁrm that this NETGEAR

cable modem is allowed on your cable network.

If you are experiencing trouble installing your cable modem, contact NETGEAR at

1-866-874-8924. If you are experiencing trouble connecting your router, contact

the router manufacturer.

Note to CATV system installer: This reminder is provided to call the CATV systems

installer’s attention to Section 820-93 of the National Electrical Code which

provide guidelines for proper grounding and in particular, specify that coaxial

cable shield shall be connected to the grounding system of the building, as close

to the point of cable entry as practical.

NETGEAR INTL LTD

Building 3, University Technology Centre

Curraheen Road, Cork, Ireland

January 2019

NETGEAR, Inc.

350 East Plumeria Drive

San Jose, CA 95134, USA

NETGEAR, Inc. Any non‑NETGEAR trademarks are used for reference

purposes only.

1. Collect your cable Internet provider information.

Collect your cable account number, account phone number, and login

information (your email address or user name and password).

2. Turn off and disconnect existing modems and routers.

If you are replacing a modem that is currently connected in your home,

unplug the modem and plug the new cable modem into the same outlet.

3. Connect a coaxial cable.

Use a coaxial cable to connect the cable port on the cable modem to a cable

wall outlet.

Make sure that the cable is tightly connected.

Note: If Comcast XFINITY is your cable Internet provider, Comcast XFINITY

recommends connecting your cable modem directly to a cable wall outlet.

4. Connect the power adapter.

Connect the power adapter to the cable modem and plug the power adapter

into an electrical outlet.

When the startup procedure is complete, the Power LED lights green.

If the Power LED does not light, make sure that the Power On/Off button is in

the On position.

5. Wait for the cable modem to come online.

This process might take up to 10 minutes.

Set Up the Hardware

When the cable modem comes online, the Online LED stops blinking and

lights solid green.

6. Connect a computer to the cable modem.

Use an Ethernet cable to connect a computer to the LAN port on the

cable modem.

Reboot the computer.

7. Activate your Internet service.

For information about how to activate your Internet service, see the following

section Activate Your Internet Service.

After you install and activate the cable modem, you can disconnect the

computer and connect a router to the cable modem. For more information,

see Connect a Router on the other side of this quick start guide.

Activate Your Internet Service

You must set up your cable modem before activating your Internet service. For

more information, see Set Up the Hardware.

Before you start the self-activation process, collect the following information:

• Your cable Internet provider account information

• Cable modem model number, which is CM1000v2

• Cable modem serial number

• Cable modem MAC address

Your cable modem’s serial number and MAC address are on the cable modem

label. The following table lists contact information for cable Internet providers that

support your cable modem.

To activate your Internet service:

1. Visit your cable Internet provider’s website and follow the onscreen

instructions to activate your Internet service.

2. To determine the accurate Internet speed, visit your cable Internet provider’s

speed test website and perform a speed test.

Cable Internet Provider Contact Information

Cablevision https://www.cableone.net/

1-877-MY-CABLE (1-877-692-2253)

Cox https://www.cox.com/activate

1-888-556-1193

Mediacom https://support.mediacomcable.com/

1-855-Mediacom (1-855-633-4226)

Optimum https://install.optimum.com/JointInstall/

1-877-810-6750

Spectrum https://activate.spectrum.net/

1-833-267-6094

Xﬁnity https://register.xnity.com/

https://www.xnity.com/support/articles/activate-

purchased‑modem

1-800-XFINITY (1-800-934-6489)

Note: Your cable Internet provider’s contact information might change. You

can also find the contact information in your monthly Internet service billing

statement.

Andere Handbücher für CM1000v2

Andere NETGEAR Modem Handbücher

NETGEAR

NETGEAR DM111PBL Bedienungsanleitung

NETGEAR

NETGEAR RM356 - Router - EN Bedienungsanleitung

NETGEAR

NETGEAR C6250 Bedienungsanleitung

NETGEAR

NETGEAR XM128 Bedienungsanleitung

NETGEAR

NETGEAR AC329U Bedienungsanleitung

NETGEAR

NETGEAR DGFV338 - ProSafe Wireless ADSL Modem VPN Firewall... Bedienungsanleitung

NETGEAR

NETGEAR DG834PN - RangeMax ADSL Modem Wireless... Benutzerhandbuch

NETGEAR

NETGEAR Nighthawk CM2050V Bedienungsanleitung

NETGEAR

NETGEAR CM500V Bedienungsanleitung

NETGEAR

NETGEAR Nighthawk CM2050V Bedienungsanleitung

NETGEAR

NETGEAR CM400 Bedienungsanleitung

NETGEAR

NETGEAR CM500 Bedienungsanleitung

NETGEAR

NETGEAR NIGHTHAWK CM2000 Bedienungsanleitung

NETGEAR

NETGEAR WNDRMAC Bedienungsanleitung

NETGEAR

NETGEAR CM1000v2 Bedienungsanleitung

NETGEAR

NETGEAR CM1000 Bedienungsanleitung

NETGEAR

NETGEAR CVG824G-1STAUS Bedienungsanleitung

NETGEAR

NETGEAR CM400 Bedienungsanleitung

NETGEAR

NETGEAR DG834N Bedienungsanleitung

NETGEAR

NETGEAR Nighthawk D7000 Bedienungsanleitung

NETGEAR

NETGEAR DM111P - ADSL2+ Ethernet Modem Bedienungsanleitung

NETGEAR

NETGEAR 341U Betriebsanleitung

NETGEAR

NETGEAR CM500 Bedienungsanleitung

NETGEAR

NETGEAR DM200 Bedienungsanleitung

Beliebte Modem Handbücher anderer Marken

Davicom

Davicom DM562AP Bedienungsanleitung

EpiValley

EpiValley TATA indicom SXC-1080 Bedienungsanleitung

Zte

Zte WiMAX Bedienungsanleitung

Intelimax

Intelimax MA-2060 Bedienungsanleitung

SMC Networks

SMC Networks D3CM1604V Gebrauchs- und Pflegehandbuch

Telstra

Telstra Wi-Fi 4G Advanced Pro X Bedienungsanleitung

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Bedienungsanleitung

Samsung

Samsung AceLink SAM-335A Bedienungsanleitung

Enfora

Enfora Enabler-G Kurzanleitung zur Einrichtung

iRZ

iRZ ATM2-232 Bedienungsanleitung

Zhone

Zhone 6310 Bedienungsanleitung

Paradyne

Paradyne Hotwire 7976 Bedienungsanleitung

US Robotics

US Robotics 3453C Bedienungsanleitung

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Bedienungsanleitung

Zte

Zte MF823 Bedienungsanleitung

Four-Faith

Four-Faith F1403 Bedienungsanleitung

Sierra Wireless

Sierra Wireless AIRLINK MP595W Bedienungsanleitung

Gemtek

Gemtek WiMAX WIXFBR-103 Bedienungsanleitung