NETGEAR WNCE2001 - Ethernet to Wireless Adapter Bedienungsanleitung
202-10598-01
April 2010
NETGEAR, Inc.
350 E. Plumeria Drive
San Jose, CA 95134 USA
Universal WiFi Internet
Adapter WNCE2001 User
Manual
ii
v1.0, April 2010
© 2010 by NETGEAR, Inc. All rights reserved.
Product Registration, Support, and Documentation
Register your product at http://www.NETGEAR.com/register. Registration is required before you can use our telephone
support service. Product updates and Web support are always available by going to:
http://www.netgear.com/support.
Setup documentation is available on the CD, on the support website, and on the documentation website. When the
wireless router is connected to the Internet, click the Knowledgebase or the Documentation link under Web Support in
the main menu to view support information.
Trademarks
NETGEAR, the NETGEAR logo, ProSafe, and Auto Uplink are trademarks or registered trademarks of NETGEAR, Inc.
NETGEAR. Inc. in the United States and/or other countries. Microsoft, Windows, and Windows NT are registered
trademarks and Windows Vista is a trademark of Microsoft Corporation. Other brand and product names are registered
trademarks or trademarks of their respective holders.
Statement of Conditions
In the interest of improving internal design, operational function, and/or reliability, NETGEAR reserves the right to
make changes to the products described in this document without notice.
NETGEAR does not assume any liability that may occur due to the use or application of the product(s) or circuit
layout(s) described herein.
Maximum Wireless Signal Rate Derived from IEEE Standard 802.11 Specifications
Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic,
building materials and construction, and network overhead, lower actual data throughput rate.
Safety and Regulatory Notices
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void
the user’s authority to operate this equipment.
v1.0, April 2010
iii
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance 20cm between the radiator and your body.
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
The availability of some specific channels and/or operational frequency bands are country dependent and are firmware
programmed at the factory to match the intended destination. The firmware setting is not accessible by the end user.
Canadian Department of Communications Industry Canada (IC) Notice
This Class B digital apparatus complies with Canadian ICES-003 and RSS-210. Cet appareil numérique de la classe B
est conforme à la norme NMB-003 et CNR-210 du Canada.
Industry Canada Statement
This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
IMPORTANT NOTE: Radiation Exposure Statement
This equipment complies with Canada radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator and your body.
Europe – EU Declaration of Conformity
Marking by the above symbol indicates compliance with the Essential Requirements of the R&TTE Directive of the
European Union (1999/5/EC). Visit the NETGEAR EU Declarations of Conformity website at:
http://kb.netgear.com/app/answers/detail/a_id/11621/sno/0
v1.0, April 2010
iv
Product and Publication Details
Model Number: WNCE2001
Publication Date: April 2010
Product Family: Universal WiFi Internet Adapter
Product Name: Universal WiFi Internet Adapter WNCE2001
Home or Business Product: Home
Language: English
Publication Part Number: 202-10598-01
Publication Version Number: 1.0
v
v1.0, April 2010
Contents
About This Manual
Conventions, Formats, and Scope ................................................................................... vi
How to Print This Manual ................................................................................................ vii
Revision History ........................................................................................................ vii
Chapter 1
Installation
Installation with WPS ......................................................................................................1-1
Installation without WPS .................................................................................................1-2
Power Connection Options ......................................................................................1-4
LEDs ........................................................................................................................1-5
Chapter 2
Network Connections and Wireless Security
Viewing Wireless Networks in Your Area .......................................................................2-1
Selecting a Network ........................................................................................................2-1
Using Push 'N' Connect to Join a Network ...............................................................2-1
About Wireless Security .................................................................................................2-2
Wireless Network Name (SSID) and Security Settings ............................................2-2
Setting Up WPA-PSK [TKIP] or WPA2-PSK [AES] Security ....................................2-3
Setting Up WEP Encryption Security .......................................................................2-4
Chapter 3 Wireless Network Performance
Optimizing Wireless Performance ..................................................................................3-1
Optimizing Your Network Bandwidth ..............................................................................3-2
Chapter 4 Troubleshooting
Troubleshooting Tips ......................................................................................................4-1
Appendix A Technical Specifications and Factory Default Settings
Technical Specifications ................................................................................................ A-1
Factory Default Settings ................................................................................................ A-2
Appendix B Related Documents
vi
v1.0, April 2010
About This Manual
The NETGEAR®Wireless-N 300 USB Adapter WNA3100 User Manual describes how to install,
configure, and troubleshoot the Universal WiFi Internet Adapter WNCE2001.
Conventions, Formats, and Scope
The conventions, formats, and scope of this manual are described in the following paragraphs:
•Typographical conventions.This manual uses the following typographical conventions::
•Formats.This manual uses the following formats to highlight special messages:
Italic Emphasis, books, CDs
Bold User input, screen text
Fixed Command prompt, CLI text, code
italic URL links
Note: This format is used to highlight information of importance or special interest.
Tip: This format is used to highlight a procedure that will save time or resources.
Warning: Ignoring this type of note might result in a malfunction or damage to the
equipment, a breach of security, or a loss of data.
Universal WiFi Internet Adapter WNCE2001 User Manual
vii
v1.0, April 2010
•Scope.This manual is written for the WiFi Internet Adapter. For more information about
network, Internet, firewall, and VPN technologies, click the links to the NETGEAR website in
Appendix B, “Related Documents.”
How to Print This Manual
To print this manual, your computer must have the free Adobe Acrobat reader installed in order to
view and print PDF files. The Acrobat reader is available on the Adobe Web site at
http://www.adobe.com.
Revision History
Note: Product updates are available on the NETGEAR, Inc. website at
http://kbserver.netgear.com/products/WNCE2001.asp.
Tip: If your printer supports printing two pages on a single sheet of paper, you can
save paper and printer ink by selecting this feature.
Part Number Version
Number Date Description
202-10598-01 1.0 April 2010 Original publication
Universal WiFi Internet Adapter WNCE2001 User Manual
1-1
v1.0, April 2010
Chapter 1
Installation
This chapter explains how to set up the Universal WiFi Internet Adapter, with or without WPS.
WPS (WiFi Protected Setup) is a simple and secured way to connect a device to an existing
netowrk. If you have a NETGEAR router, this feature is called Push 'N' Connect. Look for the
or symbols on the router to make sure the NETGEAR router supports WPS. For non-
NETGEAR routers, please refer to that router’s user manual to determine if the router supports
WPS. Once you know whether your router supports WPS, choose the appropriate installation
method.
Installation with WPS
If your are using the WNCE2001 with a router that supports WPS, follow the installation
instructions in this section. If not, go to the next section
1. Use the included Ethernet cable to connect the WNCE2001 to your TV, XBox, or Blu-ray
player..
2.
Figure 1-1
Universal WiFi Internet Adapter WNCE2001 User Manual
1-2
v1.0, April 2010
3. Connect the WNCE2001 to power by either plugging it directly into a wall outlet, or by
connecting it to any USB port using the included USB power cable. For more information on
power connection options, see “Power Connection Options” on page 1-4.
4. Push the WPS button on the WNCE2001.
The WLAN LED will blink amber and green, showing that the WPS is running.
5. Push the WPS button on your router. The WLAN LED on the WNCE2001 will stay green for
5 seconds when the wireless connection has been established.
6. Your installation is complete.
Installation without WPS
To install your WNCE2001 without WPS, do the following:
1. Disconnect any wireless connection to the router and/or remove the Ethernet cable currently
connected to the computer. (You may restore the connection after theWNCE2001 installation
is complete.)
Figure 1-2
Universal WiFi Internet Adapter WNCE2001 User Manual
1-3
v1.0, April 2010
2. Connect the WNCE2001 to your computer, using the Ethernet cable (included) and one of the
power connection options described in “Power Connection Options” on page 1-4.
3. Open your Internet browser and it will automatically take you to the setup page.
4. Select the language you want to use from the drop-down list. You can choose English,
German, French or Italian. Press Continue.
Figure 1-3
Figure 1-4
Andere Handbücher für WNCE2001 - Ethernet to Wireless Adapter
4
Inhaltsverzeichnis
Andere NETGEAR Modem Handbücher
NETGEAR
NETGEAR Nighthawk D7000 Bedienungsanleitung
NETGEAR
NETGEAR XM128S Bedienungsanleitung
NETGEAR
NETGEAR NIGHTHAWK CAX25 Bedienungsanleitung
NETGEAR
NETGEAR Nighthawk A8000 Bedienungsanleitung
NETGEAR
NETGEAR DM200 Bedienungsanleitung
NETGEAR
NETGEAR D3600 Bedienungsanleitung
NETGEAR
NETGEAR CM500 Bedienungsanleitung
NETGEAR
NETGEAR AC327U Bedienungsanleitung
NETGEAR
NETGEAR DG814 - DSL Modem Internet Gateway Bedienungsanleitung
NETGEAR
NETGEAR FVL328 - Cable/DSL ProSafe VPN Firewall... Bedienungsanleitung
NETGEAR
NETGEAR CM1100 Bedienungsanleitung
NETGEAR
NETGEAR CGD24G Bedienungsanleitung
NETGEAR
NETGEAR CM1000 Bedienungsanleitung
NETGEAR
NETGEAR DM200 Bedienungsanleitung
NETGEAR
NETGEAR DG814 - DSL Modem Internet Gateway Bedienungsanleitung
NETGEAR
NETGEAR AC327U Bedienungsanleitung
NETGEAR
NETGEAR orbi CBR750 Bedienungsanleitung
NETGEAR
NETGEAR Nighthawk C7100V Bedienungsanleitung
NETGEAR
NETGEAR Orbi Pro SRC60 Bedienungsanleitung
NETGEAR
NETGEAR A6200 Bedienungsanleitung
Beliebte Modem Handbücher anderer Marken
Davicom
Davicom DM562AP Bedienungsanleitung
EpiValley
EpiValley TATA indicom SXC-1080 Bedienungsanleitung
Zte
Zte WiMAX Bedienungsanleitung
Intelimax
Intelimax MA-2060 Bedienungsanleitung
SMC Networks
SMC Networks D3CM1604V Gebrauchs- und Pflegehandbuch
Telstra
Telstra Wi-Fi 4G Advanced Pro X Bedienungsanleitung
US Robotics
US Robotics 3453C Bedienungsanleitung
MaxTech
MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Bedienungsanleitung
Zte
Zte MF823 Bedienungsanleitung
Four-Faith
Four-Faith F1403 Bedienungsanleitung
Sierra Wireless
Sierra Wireless AIRLINK MP595W Bedienungsanleitung
Gemtek
Gemtek WiMAX WIXFBR-103 Bedienungsanleitung