NETGEAR RangeMax WPN311 Bedienungsanleitung

)NSTALLATION'UIDE

NETGEAR RangeMax™ Wireless PCI Adapter WPN311

These basic setup instructions assume that you will connect to an access point using the

default security options. See the online help and the NETGEAR RangeMax™ Wireless

PCI Adapter WPN311 User Manual on the NETGEAR CD for instructions on configuring

wireless security, Ad-hoc mode, or advanced options.

Estimated Completion Time: 15-25 minutes.

1. First, install the WPN311

software.

Insert the NETGEAR CD. If the CD main

page does not appear, double click

Autorun.exe on the CD.

a. Click Install the Software. The Check

for Updates window opens.

b. If you are connected to the Internet, click

Check for Updates. If not, you can

choose to install from the CD.

c. Follow the Wizard steps and click Next to continue.

When the software has been installed the Connection Wizard prompts you to shut

down the computer.

2. Now, install the wireless PCI adapter card.

a. Shut down your computer and unplug the power cord.

b. Open the case and insert your WPN311 Wireless PCI Adapter into a PCI slot.

c. Connect the antenna to the adapter and position the antenna to the up position.

d. Close the case, plug the power cord back in, and restart your computer.

The WPN311 software automatically runs.

e. Select the country domain where you are located from the drop-down list and

click Agree.

3. Use the Smart Wizard to set up your wireless PCI adapter.

a. Windows 2000 users go to Step b. Windows

XP or Vista users can set up the wireless

adapter either with the NETGEAR Smart

Wizard (recommended) or the Windows

configuration utilities.

•NETGEAR Smart Wizard: Reveals

more information about each network

and makes it easier to troubleshoot

network connection problems.

•Windows configuration utilities: See the Windows documentation or

“Using Windows XP and Vista Wireless Configuration Utilities” at:

http://documentation.netgear.com/reference/enu/winzerocfg/index.htm

b. Click Next to accept the NETGEAR Smart

Wizard.

You will be prompted to let the Connection

Wizard guide you (recommended).

c. Click Finish to accept.

4. Connect to a wireless network.

a. Select the wireless network from the drop-

down list, and the wizard records your

choice.

Note: Hidden networks do not broadcast

the Network Name (SSID). These

networks are in the drop-down list,

but the Network Name (SSID) is

blank.

If the network uses security, then the Smart

Wizard detects it.

b. Follow the Wizard steps for Security (if used) and for saving a Profile.

c. After you have reviewed the settings, click Finish.

The Connection Wizard initiates your wireless connection. It could take up to a

minute for your wireless connection to be established.

Using the Status Bar

The status bar is located at the bottom of the Settings page.

Note: To optimize throughput, connect to a network with a high-speed router or access

point, and a high-speed Internet connection. For more information about optimizing

wireless performance, and network bandwidth, see the Installation Guide for the

NETGEAR RangeMax™ Wireless PCI Adapter WPN311 on the NETGEAR CD.

Understanding the Status Bar

Wireless network Identifies which wireless network you have joined.

Security • Locked: security enabled.

• Unlocked: security not enabled.

Channel The wireless channel used by the network. If many wireless networks

in your area use the same channel they can interfere with one

another.

Throughput Wireless throughput measured in Mega bits per second.

Signal strength More dots indicates a stronger signal. Usually, you will experience

higher throughput when the signal is strongest.

Find a Network Click Find a Network to open the Connection Wizard.

Connection

status Identifies the status of your network connection.

•Connected to Internet: Wireless Internet connection is OK.

•Connected to Router: Wireless connection to the router is OK but

the router is not connected to the Internet.

•169.254.x.x or ___.___.___.___ : The wireless connection to the

router is OK but there is a problem with the router. See the online

help or the Installation Guide for the NETGEAR RangeMax™

Wireless PCI Adapter WPN311 on the NETGEAR CD for

troubleshooting tips.

Wireless

network

Connection status

Security

Find a Network

Channel Throughput

Signal

strength

January 17, 2007

This symbol was placed in accordance with the European Union Directive

2002/96 on the Waste Electrical and Electronic Equipment (the WEEE

Directive). If disposed of within the European Union, this product should be

treated and recycled in accordance with the laws of your jurisdiction

implementing the WEEE Directive.

United States and/or other countries. Other brand and product names are trademarks or registered trademarks of

their respective holders. Information is subject to change without notice.

Technical Support

After completing the Smart Wizard configuration assistant, locate the serial number on the

bottom label of your product and use it to register your product at

http://www.NETGEAR.com/register.

Registration on the Web site or over the phone is required before you can use our

telephone support service. The phone numbers for worldwide regional customer support

centers are on the Warranty and Support Information card that came with your product.

Go to http://kbserver.netgear.com for product updates and Web support.

Andere Handbücher für RangeMax WPN311

Inhaltsverzeichnis

Andere NETGEAR Netzwerkkarte Handbücher

NETGEAR

NETGEAR GA621 Bedienungsanleitung

NETGEAR

NETGEAR powerline 500 XAVB5622 Bedienungsanleitung

NETGEAR

NETGEAR FA510 - 32-Bit 10 And 100 Mpbs PCMCIA Network... Bedienungsanleitung

NETGEAR

NETGEAR FA312 Bedienungsanleitung

NETGEAR

NETGEAR PLW1000 Bedienungsanleitung

NETGEAR

NETGEAR GA620 - PCI Fiber Card Bedienungsanleitung

NETGEAR

NETGEAR GA620 - PCI Fiber Card Handbuch

NETGEAR

NETGEAR GA511 - Gigabit Ethernet PC Card Bedienungsanleitung

NETGEAR

NETGEAR FA410TX - FA-410 Network Card Bedienungsanleitung

NETGEAR

NETGEAR XAVB6504 Bedienungsanleitung

NETGEAR

NETGEAR GA 620T Bedienungsanleitung

NETGEAR

NETGEAR FA310TX - 10/100Mbps Fast Ethernet PCI Card Bedienungsanleitung

NETGEAR

NETGEAR XAV1201/XAVB1201 Bedienungsanleitung

NETGEAR

NETGEAR GA622T - Copper Gigabit Ethernet Card Bedienungsanleitung

NETGEAR

NETGEAR MA701 - 802.11b 11 Mbps Compact Flash Card Bedienungsanleitung

NETGEAR

NETGEAR WPN111 - RangeMax Wireless USB 2.0 Adapter Bedienungsanleitung

NETGEAR

NETGEAR GA621 Bedienungsanleitung

NETGEAR

NETGEAR FA311 - 10/100Mbps PCI Ethernet Interface... Bedienungsanleitung

NETGEAR

NETGEAR RangeMax WN511T Bedienungsanleitung

NETGEAR

NETGEAR MA701 - 802.11b 11 Mbps Compact Flash Card Bedienungsanleitung

NETGEAR

NETGEAR WNCE4004 Bedienungsanleitung

NETGEAR

NETGEAR PA301 Bedienungsanleitung

NETGEAR

NETGEAR PL1010 Bedienungsanleitung

NETGEAR

NETGEAR WG111U - Double 108 Mbps Wireless USB 2.0... Bedienungsanleitung

Beliebte Netzwerkkarte Handbücher anderer Marken

FirstComm

FirstComm OBiWiFi5G Bedienungsanleitung

Sun Microsystems

Sun Microsystems Interface Adapter Bedienungsanleitung

TRENDnet

TRENDnet TU2-ETG Bedienungsanleitung

YASKAWA

YASKAWA SI-EN3 Bedienungsanleitung

Paradyne

Paradyne BitStorm 2600 IP DSLAM Bedienungsanleitung

Belkin

Belkin F5D7050 Bedienungsanleitung

3Com

3Com EtherLink 3C509B Bedienungsanleitung

TRENDnet

TRENDnet TEG-PCITX Bedienungsanleitung

Cisco

Cisco MC16E Bedienungsanleitung

Delta Electronics

Delta Electronics Braking Modules VFDB Series Bedienungsanleitung

TwinMOS

TwinMOS Booming Bedienungsanleitung

Dialogic

Dialogic Media Board DM/V1200BTEPEQ Bedienungsanleitung

Buffalo

Buffalo AirStation WLI-PCM-L11GP Bedienungsanleitung

National Instruments

National Instruments NI 9234 Bedienungsanleitung

Hama

Hama 49276 Bedienungsanleitung

Linksys

Linksys WCF54G - Wireless-G Compact Flash Card Bedienungsanleitung

Compaq

Compaq Wireless LAN 100 Bedienungsanleitung

Bose

Bose PowerMatch Dante Bedienungsanleitung