NETGEAR FVX538v1 - ProSafe VPN Firewall Dual WAN Bedienungsanleitung

Andere Handbücher für FVX538v1 - ProSafe VPN Firewall Dual WAN

3

Dieses Handbuch passt für folgende Modelle

2

Inhaltsverzeichnis

Andere NETGEAR Netzwerk-Router Handbücher

NETGEAR

NETGEAR XE102 - Wall-Plugged EN Bridge Bedienungsanleitung

NETGEAR

NETGEAR R6300 Bedienungsanleitung

NETGEAR

NETGEAR RP614 v2 Bedienungsanleitung

NETGEAR

NETGEAR RT338 RT338 RT338 Bedienungsanleitung

NETGEAR

NETGEAR D3600 Bedienungsanleitung

NETGEAR

NETGEAR WNDR3800 - N600 WIRELESS DUAL BAND GIGABIT ROUTER-Premium... Bedienungsanleitung

NETGEAR

NETGEAR WNDR4500 Bedienungsanleitung

NETGEAR

NETGEAR RP614 v4 Referenzhandbuch

NETGEAR

NETGEAR WGR614 v6 Bedienungsanleitung

NETGEAR

NETGEAR WGE101 Bedienungsanleitung

NETGEAR

NETGEAR C7800 Bedienungsanleitung

NETGEAR

NETGEAR Nighthawk M6 Pro Bedienungsanleitung

NETGEAR

NETGEAR Nighthawk GS808E Bedienungsanleitung

NETGEAR

NETGEAR DG834G Bedienungsanleitung

NETGEAR

NETGEAR ProSafe FVX538 Montage- und Bedienungsanleitung

NETGEAR

NETGEAR RAX5 Bedienungsanleitung

NETGEAR

NETGEAR Orbi RBR50 Bedienerhandbuch

NETGEAR

NETGEAR RAX75 Bedienungsanleitung

NETGEAR

NETGEAR XE102 - Wall-Plugged EN Bridge Bedienungsanleitung

NETGEAR

NETGEAR C6220 Bedienungsanleitung

NETGEAR

NETGEAR N300 Bedienungsanleitung

NETGEAR

NETGEAR DG834Gv2 - 54 Mbps Wireless ADSL Firewall... Bedienungsanleitung

NETGEAR

NETGEAR Orbi RBR350 Bedienungsanleitung

NETGEAR

NETGEAR Orbi RBR50 Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise

LevelOne

LevelOne FBR-1416 Bedienungsanleitung

Mode Config of a VPN tunnel from ProSafe Client to FVX538v2 Router:

Mode Config is a feature included in some of the Netgear Routers which allows the IP addressing

of the remote client devices be handled and controlled by the VPN Router by using a Virtual

Adapter. This document will guide you on how to create IKE and Mode Config policies for your

FVX538v2, as well as how to configure the VPN Pro-Safe VPN client in order to allow a Virtual

Private Network to be established over the internet.

NOTE: This document assumes that your FVX538v2 is either receiving a public IP

address on the WAN interface or that the gateway device(s) have the correct port

forwarding or DMZ configured so that port 500 UDP is open for the FVX538v2, these

gateway devices must also allow VPN pass-through.

FVX538v2

– Mode Config:

To configure it, go to the VPN section and then select Mode Config. For our example we’ll use the

following settings:

The first pool of IP addresses, 192.168.24.1 to 192.168.24.250, lists the addresses that the

clients will acquire when they connect. Notice that you can add up to three pools, addresses from

the second pool will be used when the addresses of the first pool are all in use. Likewise for the

third pool, it’ll be used when the first and second pools are exhausted. Notice that you can also

set particular DNS servers or WINS for the client virtual adapters.

(Note: DO NOT add IP addresses that are currently in use in any of the networks at either side of

the VPN tunnel – Use completely different subnets.)

FVX538v2

– IKE Policy:

With the Mode Config policy created, go to VPN, Policies, IKE policies and create a new one. For

our example, we’ll use the following settings.

(Note: The pre-shared key could be any alphanumeric string)

Pro-Safe VPN Client - Configuration:

Right click on “My Connections” and add a new connection. Use the same name you used to

name the VPN policy in your VPN gateway. In this example the name will be “VPN”.

Click on the name of the new created connection and fill the parameters accordingly, for this

example we’ll use these:

(NOTE: The Subnet and Mask must be those of the LAN side of your FVX538. The Gateway IP address field must be the

WAN IP address of the FVX538. )

Click on “My Identity” and fill the fields accordingly, be sure to click on the Pre-Shared Key

button and input your own pre shared key. Here are the settings used in our example:

Click on “Security Policy” and verify the following settings:

Next, expand “Security Policy” and “Authentication (Phase 1)” – Click on “Proposal 1” and

verify the settings contained to match the ones of your policy. Functional settings in our example:

Open the “Key Exchange (Phase 2)” category – Click on “Proposal 1” and verify the settings

contained to match the ones of your policy. Functional settings in our example:

For last, right click on the tray icon of the Netgear VPN client with your mouse, select connect and

select the connection you just created.

If your settings are correct you’ll receive a message confirming the connection.

FVX538v2

– Verifying connection:

If you wish to verify that the connection is established, which IP did you receive from the Mode

Config pools and whether you can access the LAN side of the VPN router, open a command

console and use the IPCONFIG command to see the IP address of the Virtual Adapter. You can

also use the command PING towards the LAN address of your router to verify connectivity.