NETGEAR Nighthawk X4SAC2600 Bedienungsanleitung

Quick Start

Package Contents

The package contents vary depending on the region.

Note: In some regions, a resource CD is included in the package.

Nighthawk X4S

AC2600 WiFi VDSL/ADSL Modem Router

Model D7800

Support

Thank you for purchasing this NETGEAR product.

After installing your device, locate the serial number on the label of your product and use it

to register your product at https://my.netgear.com.

You must register your product before you can use NETGEAR telephone support. NETGEAR

recommends registering your product through the NETGEAR website.

For product updates and web support, visit http://support.netgear.com.

NETGEAR recommends that you use only the official NETGEAR support resources.

You can get the user manual online at http://downloadcenter.netgear.com or through a link in

the product’s user interface.

Trademarks

Any non‑NETGEAR trademarks are used for reference purposes only.

Compliance

For the current EU Declaration of Conformity, visit

http://support.netgear.com/app/answers/detail/a_id/11621/.

For regulatory compliance information, visit

http://www.netgear.com/about/regulatory/.

See the regulatory compliance document before connecting the power supply.

NETGEAR, Inc.

350 East Plumeria Drive

San Jose, CA 95134 USA

July 2015

Modem router

Power adapter

(varies by region)

Antennas (4)

DSL filter

(varies by region)

Phone cable

Ethernet cable

1. Attach and position the antennas.

To determine where to attach the antennas,

match the labels on the antennas with the labels

on the modem router.

Attach the antennas on the threaded antenna

posts. Position the antennas vertically for the

best WiFi performance.

2. Connect the modem router to an Internet

service.

To connect to a DSL service (ADSL or

VDSL):

Install a DSL filter and connect it to the VDSL

port on the modem router.

To connect to a cable or fiber modem:

Prepare your cable or fiber modem and

connect it to the red Internet port on the

modem router.

3. Power on the modem router.

Wait for the Power LED to

light white. If the Power LED does

not light, press the Power On/Off

button.

Wait for the WiFi LED to light

white.

4. Check the DSL LED.

If the modem router is connected to

a DSL service, the DSL LED lights

white.

5. Connect a device.

You can use an Ethernet cable or

connect with WiFi.

To connect with WiFi, use the WiFi

network name and password on the

product label.

6. Log in to the modem router.

Launch a web browser.

NETGEAR genie displays.

If you do not see genie, enter

www.routerlogin.net in the address

field of the web browser. When

prompted, enter admin for the user

name and password for the password.

NETGEAR genie determines your

Internet connection.

7. Get the genie app.

Download the free genie app from

www.NETGEAR.com/genie.

Easily share media, files, and printers

on the network from your smartphone,

tablet, or laptop.

Ethernet cable

ADSL or VDSL

Internet

Cable or fiber

modem

Power adapter

You can use this diagram to connect your modem router or follow the detailed instructions in this booklet.

DSL filter

Ethernet

cable Phone cable

Modem

router

Cable or fiber

Internet

Computer

8. Get the user manual.

You can get the user manual online at

http://downloadcenter.netgear.com

or through a link in the product’s user

interface.

WiFi device

Hardware Features

Front Panel

The LEDs, buttons, and ports are shown in the following figure.

For more information about the LEDs and buttons, see LEDs on

page 2.

Rear Panel

The connections and buttons on the rear panel of the

modem router are shown in the following figure:

Internet

port

Reset

button

Power

On/Off

button

Power

connector

VDSL port

Ethernet

ports 1–4

LED Off/On

switch

LEDs WPS button

with LED

WiFi On/Off

button with

LED

eSATA

port

USB 3.0

port 1

USB 3.0

port 2

LEDs

The LEDs on the top of the modem router light to indicate

modem router activity:

LED Description

Power LED • Solid white. The modem router is ready.

• Solid amber. The modem router is starting.

• Blinking amber. The firmware is upgrading, or the Reset

button was pressed.

• Blinking white. The firmware is corrupted.

• Off. Power is not supplied to the modem router.

DSL LED • Solid white. The modem router is connected to a DSL

service and the DSL connection is ready.

• Blinking amber. The modem router is negotiating the

best possible speed on the DSL line.

• Off. The modem router is not connected to a DSL

service or a DSL connection is not established.

2.4 GHz WiFi LED • Solid white. The 2.4 GHz WiFi radio is operating.

• Blinking white. The modem router is sending or

receiving WiFi traffic.

• Off. The 2.4 GHz WiFi radio is off.

5 GHz WiFi LED • Solid white. The 5 GHz WiFi radio is operating.

• Blinking white. The modem router is sending or

receiving WiFi traffic.

• Off. The 5 GHz WiFi radio is off.

USB 3.0 port 1

LED

USB 3.0 port 2

LED

• Solid white. A USB storage device is connected and is

ready.

• Blinking white. A USB storage device is plugged in and is

trying to connect.

• Off. No USB storage device is connected, or someone

clicked the Safely Remove Hardware button and it is

now safe to remove the attached USB storage device.

LED Description

eSATA LED • Solid white. An eSATA device is connected and is ready.

• Blinking white. An eSATA device is plugged in and is

trying to connect.

• Off. No eSATA device is connected.

Ethernet ports

1–4 LEDs

The LED color indicates the speed: white for Gigabit

Ethernet connections and amber for 100 Mbps or 10 Mbps

Ethernet connections.

• Solid. A powered‑on device is connected to the Ethernet

port.

• Blinking. The port is sending or receiving traffic.

• Off. No device is connected to this Ethernet port.

WiFi On/Off

button with LED

Pressing this button for two seconds turns the 2.4 GHz and

5 GHz WiFi radios on and off.

If this LED is lit, the WiFi radios are on. If this LED is off,

the WiFi radios are turned off and you cannot use WiFi to

connect to the modem router.

WPS button with

LED

This button lets you use WPS to join the WiFi network

without typing the WiFi password. The WPS LED blinks

white during this process and then lights solid white.

Additional Information for DSL Service

Make sure that your DSL service (ADSL or VDSL) is active before

you install the modem router. You need the following information to

install your modem router and connect to the Internet:

• DSL user name and password. This information is included

in the welcome letter that your DSL Internet service provider

(ISP) sent you when you signed up for your service.

• Your telephone number or DSL account number. If you do

not use voice service, you can use your DSL account number

instead.

If you do not know or cannot locate your DSL user name and

password, call your DSL ISP.

Note: If your provider says that they do not support NETGEAR

services, tell them that you need only your DSL user name and

password. You do not need support.

Install Your Modem Router

Make sure that your Internet service is active before you install

your modem router.

¾To install your modem router:

1. Attach and position the antennas:

a. To determine where to attach the antennas, match the

labels on the antennas with the labels on the modem router.

b. Align the antennas with the antenna posts on the

modem router.

c. Attach the antennas on the threaded antenna posts.

d. Position the antennas for the best WiFi performance.

NETGEAR recommends that you position all of the antennas

vertically, as shown.

2. Connect the modem router to an Internet service:

• To connect the modem router to a DSL service (ADSL or

VDSL), do the following:

a. Install a DSL filter between your phone line and a phone.

b. Use the phone cable to connect the DSL filter to the

VDSL port on the modem router.

• To connect the modem router to a cable or fiber modem,

do the following:

a. Unplug your modem’s power, leaving the modem

connected to the wall jack for your Internet service.

If your modem uses a battery backup, remove the

battery.

Ethernet

cable

Cable or fiber

Internet

Cable or fiber

modem

Modem router

ADSL or VDSL

Internet

DSL filter

Modem router

Phone cable

b. Plug in and turn on your modem.

If your modem uses a battery backup, put the battery

back in.

c. With an Ethernet cable, connect your modem to the

red Internet port on your modem router.

3. Add power to the modem router:

a. Connect the power adapter to the modem router and plug

the power adapter into an outlet.

b. Wait for the Power LED to light white.

If the Power LED does not light, press the Power On/Off

button.

c. Wait for the WiFi LED to light white.

If the WiFi LED does not light, press the WiFi On/Off

button.

4. Check the DSL LED.

If the modem router is connected to a DSL service, the

DSL LED lights white.

Modem router

Power

adapter

5. Connect a device:

You can use a wired connection to connect a computer to the

modem router, or you can use a WiFi connection to connect a

computer or WiFi device to the modem router:

• To connect using a wired connection, use an Ethernet

cable (not included) to connect an Ethernet port on your

computer to an Ethernet port on the modem router.

• To connect using a WiFi connection, use the WiFi network

name and password on the product label.

Cable

or fiber

modem

Power adapter

ADSL or VDSL

Internet

DSL filter

Phone cable

Ethernet cable

Cable or fiber

Internet

Ethernet

cable

Computer

WiFi device

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere NETGEAR Netzwerk-Router Handbücher

NETGEAR

NETGEAR WGR614v2 Bedienungsanleitung

NETGEAR

NETGEAR C6220 Bedienungsanleitung

NETGEAR

NETGEAR FS524NA Bedienungsanleitung

NETGEAR

NETGEAR Orbi RBR20 Bedienungsanleitung

NETGEAR

NETGEAR FR314 Bedienungsanleitung

NETGEAR

NETGEAR Orbi Pro WiFi 6 AX6000 Bedienungsanleitung

NETGEAR

NETGEAR C6300v2 Bedienungsanleitung

NETGEAR

NETGEAR JWNR3000 Bedienungsanleitung

NETGEAR

NETGEAR RH348 Bedienungsanleitung

NETGEAR

NETGEAR R6300 Bedienungsanleitung

NETGEAR

NETGEAR Nighthawk R7450 Bedienungsanleitung

NETGEAR

NETGEAR N750 Bedienungsanleitung

NETGEAR

NETGEAR C6300 Bedienerhandbuch

NETGEAR

NETGEAR Nighthawk X6 AC3000 R7850 Bedienungsanleitung

NETGEAR

NETGEAR GS408EPP Bedienungsanleitung

NETGEAR

NETGEAR Nighthawk X4S R7800 Bedienungsanleitung

NETGEAR

NETGEAR Nighthawk R7100LG Bedienungsanleitung

NETGEAR

NETGEAR ME101 - Wireless EN Bridge Network Converter Bedienungsanleitung

NETGEAR

NETGEAR C3000v2 Bedienungsanleitung

NETGEAR

NETGEAR Orbi Pro SRR60 Bedienungsanleitung

NETGEAR

NETGEAR DG834 - ADSL Firewall Router Bedienungsanleitung

NETGEAR

NETGEAR Nighthawk AC2600 Bedienungsanleitung

NETGEAR

NETGEAR Nighthawk X4 Bedienungsanleitung

NETGEAR

NETGEAR WNR3500L - RangeMax Wireless-N Gigabit... Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise

LevelOne

LevelOne FBR-1416 Bedienungsanleitung

Dynacord

Dynacord Promatrix 6000 Bedienungsanleitung