NETGEAR R6400v1 Bedienungsanleitung

This is ONLY for the Netgear R6400 (v1). It is not for R6400v2 (nor R6700v3 - R6400v2/R67000v2

forum thread).

Contents

1 Hardware Specs• 2 Installation• 3 Reset methods

3.1 GUI Reset♦ 3.2 Command Line

Interpreter (CLI) Reset

♦

3.3 Reset Button♦

•

4 Reset notes•

Hardware Specs

The hardware is almost identical to a Netgear R6300v2, but has external antennas and different FCC and

board IDs.

CPU Broadcom BCM4708A0

CPU Speed 800 MHz (2 Cores)

Flash ROM 128 MB

RAM 256 MB

Radios BCM4360 5 GHz & BCM4331 2.4 GHz

WLAN Support a/n+ac 3x3:3 & b/g/n 3x3:3

WLAN Max Speed 450 Mb/s (2.4Ghz), 1300 Mb/s (5Ghz)

Antenna Location External

Switch 4x GigE LAN + 1 GigE WAN

USB 1x USB 3.0 + 1x USB 2.0

Power Adapter 12VDC 2.5A wall wart

Installation

Firmware is in the netgear-r6400 directory, and has been supported in DD-WRT since build 29968. KONG

builds may also be used. (K3-AC-ARM folder). See Where do I download firmware? for links to both Kong

and regular (Brainslayer) builds.

Use the .chk file to flash from the OEM firmware GUI, then reset afterward: see below.• Use the webupgrade file to upgrade to a newer version of dd-wrt.•

Netgear_R6400v1

Contents 1

Reset methods

DO NOT "30-30-30" Reset ARM Devices!

GUI Reset

To restore default nvram settings either:

Select the factory reset option from the firmware upload GUI drop-down menu:

Administration->Firmware Upgrade♦ Select the firmware file and "reset to defaults" from the drop-down menu, then click Upgrade♦

•

...or use the reset to default settings option:

Administration->Factory Defaults♦ Select radio button, then Apply settings♦

•

Command Line Interpreter (CLI) Reset

Telnet (or SSH, if enabled) to the device and see Erasing NVRAM, as this is build-dependent.

Reset Button

With the firmware is running normally, hold the reset button until the lights flash (10-20 seconds).

Reset notes

In February 2015 Kong stated a reset is required for certain upgrades, such as certain wireless driver updates].

While not usually necessary, reset and manual configuration should be performed if any issues are

encountered, and only report issues after this is done. Do NOT restore an nvram backup (NVRAMBAK) from

previous builds in these cases, as it will undo the reset.

Netgear_R6400v1

Reset methods 2

Inhaltsverzeichnis

Andere NETGEAR Netzwerk-Router Handbücher

NETGEAR

NETGEAR Nighthawk CAX80 Bedienungsanleitung

NETGEAR

NETGEAR ProSAFE FS728TLP Handbuch

NETGEAR

NETGEAR Orbi Pro SRR60 Bedienungsanleitung

NETGEAR

NETGEAR FS605 Bedienungsanleitung

NETGEAR

NETGEAR DGN2000 - Wireless Router Bedienungsanleitung

NETGEAR

NETGEAR RT338 Bedienungsanleitung

NETGEAR

NETGEAR R6260 Bedienungsanleitung

NETGEAR

NETGEAR WNHDE111 Bedienungsanleitung

NETGEAR

NETGEAR DG834 - ADSL Firewall Router Bedienungsanleitung

NETGEAR

NETGEAR FE508 - Hub Bedienungsanleitung

NETGEAR

NETGEAR Nighthawk X10 Fehlerbehebungshandbuch

NETGEAR

NETGEAR DOCSIS C6230 Bedienungsanleitung

NETGEAR

NETGEAR RT338 Bedienungsanleitung

NETGEAR

NETGEAR R8300 Bedienungsanleitung

NETGEAR

NETGEAR RangeMax WNR834B Bedienungsanleitung

NETGEAR

NETGEAR RAX5 Bedienungsanleitung

NETGEAR

NETGEAR C6300 Bedienerhandbuch

NETGEAR

NETGEAR RBK843S Bedienungsanleitung

NETGEAR

NETGEAR JNR3210 Stücklistenhandbuch

NETGEAR

NETGEAR C6250 Bedienungsanleitung

NETGEAR

NETGEAR Nighthawk RS400 Bedienungsanleitung

NETGEAR

NETGEAR Wireless-N 150 Bedienungsanleitung

NETGEAR

NETGEAR WGT624v1 - 108 Mbps Wireless Firewall Router Bedienungsanleitung

NETGEAR

NETGEAR MR6550 Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise

LevelOne

LevelOne FBR-1416 Bedienungsanleitung