NETGEAR MS108EUP Handbuch

Hardware Installation Guide

8-port Ultra60 PoE++ Multi-Gigabit (2.5G)

Ethernet Plus Switch

MS108EUP

NETGEAR, Inc.

350 E. Plumeria DriveOctober 2021

San Jose, CA 95134, USA202-12574-01

Support and Community

Visit netgear.com/support to get your questions answered and access the latest

downloads.

You can also check out our NETGEAR Community for helpful advice at

community.netgear.com.

Regulatory and Legal

Si ce produit est vendu au Canada, vous pouvez accéder à ce document en français

canadien à https://www.netgear.com/support/download/.

(If this product is sold in Canada, you can access this document in Canadian French at

https://www.netgear.com/support/download/.)

For regulatory compliance information including the EU Declaration of Conformity, visit

https://www.netgear.com/about/regulatory/.

See the regulatory compliance document before connecting the power supply.

For NETGEAR’s Privacy Policy, visit https://www.netgear.com/about/privacy-policy.

By using this device, you are agreeing to NETGEAR’s Terms and Conditions at

https://www.netgear.com/about/terms-and-conditions. If you do not agree, return the

device to your place of purchase within your return period.

Do not use this device outdoors. The PoE port is intended for intra building connection

only.

Applicable to 6 GHz devices only: Only use the device indoors. The operation of 6 GHz

devices is prohibited on oil platforms, cars, trains, boats, and aircraft, except that

operation of this device is permitted in large aircraft while flying above 10,000 feet.

Operation of transmitters in the 5.925-7.125 GHz band is prohibited for control of or

communications with unmanned aircraft systems.

This switch is designed for indoor use only. If you want to connect to a device located

outdoors, the outdoor device must be properly grounded and surge protected, and

you must install an Ethernet surge protector inline between the switch and the outdoor

device. Failure to do so can damage the switch.

WARNING: Before connecting this switch to outdoor cables or devices, see

https://kb.netgear.com/000057103 for safety and warranty information.

Trademarks

Any non-NETGEAR trademarks are used for reference purposes only.

8-port Ultra60 PoE++ Multi-Gigabit (2.5G) Ethernet Plus Switch MS108EUP

Revision History

CommentsPublish DatePublication Part

Number

First publication.October 2021202-12574-01

8-port Ultra60 PoE++ Multi-Gigabit (2.5G) Ethernet Plus Switch MS108EUP

Contents

Chapter 1 Introduction

Overview................................................................................................6

Features.................................................................................................6

Safety instructions and warnings........................................................7

Chapter 2 Hardware Overview

Front panel with ports and LEDs......................................................12

LEDs......................................................................................................13

Back panel...........................................................................................14

RJ-45 ports for 100/1000/2.5GBASE-T Ethernet connectivity......14

Reset / Factory Defaults button........................................................15

Chapter 3 Applications

PoE++ and PoE+ overview................................................................17

PoE++ and high-speed desktop switching.....................................18

Chapter 4 Installation

Step 1: Prepare the site......................................................................20

Step 2: Protect against electrostatic discharge..............................20

Step 3: Unpack the switch.................................................................21

Step 4: Install the switch....................................................................22

Install the switch on a flat surface.................................................22

Wall-mount the switch horizontally..............................................22

Wall-mount the switch vertically...................................................24

Mount the switch to a pole or another surface..........................24

Step 5: Connect devices to the switch.............................................25

Step 6: Check the installation...........................................................25

Step 7: Apply power and check the LEDs.......................................26

Step 8: Manage the switch................................................................26

Chapter 5 Troubleshooting

Troubleshooting chart.......................................................................28

PoE troubleshooting suggestions....................................................29

Additional troubleshooting suggestions.........................................30

Introduction

This hardware installation guide complements the installation guide that came with your

switch and applies to the NETGEAR 8-port Ultra60 PoE++ Multi-Gigabit (2.5G) Ethernet

Plus Switch Model MS108EUP.

The switch provides eight Multi-Gigabit Ethernet copper ports that each can support

2.5 Gbps, 1 Gbps, and 100 Mbps speed. Ports 1–4 support Ultra60 PoE++ (802.3bt) so

that each port can deliver power of up to 60W PoE++ to devices such as WiFi 6 access

points, security cameras, PoE speakers, and LED lighting. Ports 5–8 each can deliver

power of up to 30W PoE+ (802.3at) to devices that do not require high power. The

maximum PoE power budget of the switch across all active PoE+ and PoE++ ports is

230W.

This chapter serves as an introduction to the switch and includes the following sections:

• Overview

• Features

• Safety instructions and warnings

Note: For more information about the topics that are covered in this manual, visit the

support website at netgear.com/support.

Note: For technical specifications, see the data sheet at

https://www.netgear.com/business/wired/switches/plus. For switch documentation,

including the installation guide and user manual, visit netgear.com/support/download.

Overview

The switch provides eight Multi-Gigabit Ethernet copper ports that support 2.5 Gbps,

1 Gbps, and 100 Mbps speed:

•Ports 1-4: Support Ultra60 PoE++ (802.3bt), allowing each port to deliver power

up to 60W PoE++.

•Port 5-8: Support PoE+ (802.3at), allowing each port to deliver power up to 30W

PoE+.

All copper ports use RJ-45 connectors. The switch supports a maximum PoE power

budget of 230W across all active PoE+ and PoE++ ports.

Note: For information about application examples, see Applications on page 16.

You can install the switch freestanding or mounted to a wall. The switch is IEEE compliant

and offers low latency. All ports can automatically negotiate to the highest speed, which

makes the switch very suitable for a mixed environment with multispeed Gigabit Ethernet,

Gigabit Ethernet, and Fast Ethernet.

For 2.5 Gbps and 1 Gbps Ethernet connections, use Category 5e (Cat 5e) or higher-rated

Ethernet cables terminated with RJ-45 connectors.

Features

The switch supports the following key hardware features:

•Eight multispeed Ethernet ports (1–8), each of which supports 2.5G, 1G, and 100M.

•Four Ultra60 PoE++ (802.3bt) ports (1–4).

•Four PoE+ (802.3at) ports (5–8).

•Total PoE power budget of 230W for the switch.

•MAC table size of 16K.

•40 Gbps line-rate, full-duplex, nonblocking switch fabric.

•Full compatibility with IEEE standards:

- IEEE 802.3 Ethernet

- IEEE 802.3u 100BASE-T

- IEEE 802.3ab 1000BASE-T

- IEEE 802.3bz NBASE-T

Hardware Installation Guide6Introduction

8-port Ultra60 PoE++ Multi-Gigabit (2.5G) Ethernet Plus Switch MS108EUP

-IEEE 802.3x Full-duplex flow control

- IEEE 802.1Q VLAN tagging

- IEEE 802.3ad Link aggregation (LAG with LACP)

-IEEE 802.1p Class of Service (QoS)

-IEEE 802.3az Energy Efficient Ethernet (EEE)

-IEEE 802.1af (PoE)

- IEEE 802.1at (PoE+)

- IEEE 802.1bt (PoE++)

•AutoSensing and autonegotiating capabilities for all ports.

•Auto Uplink™ technology is supported on all ports.

•Automatic address learning function to build the packet-forwarding information

table. The table contains up to 16K Media Access Control (MAC) addresses.

•Store-and-forward transmission to remove bad packets from the network.

•Active flow control to minimize packet loss and frame drops.

•Per-port status LEDs and system status LEDs.

•NETGEAR green power-saving features:

-Energy efficiency mode that fully conforms to the IEEE802.3az standard

- Per-port automatic change to a lower power mode when the port link is down

Safety instructions and warnings

Use the following safety guidelines to ensure your own personal safety and to help

protect your system from potential damage.

To reduce the risk of bodily injury, electrical shock, fire, and damage to the equipment,

observe the following precautions:

•This product is designed for indoor use only in a temperature-controlled and

humidity-controlled environment.

Note the following:

-For more information about the environment in which this product must operate,

see the environmental specifications in the appendix or the data sheet.

-If you want to connect the product to a device located outdoors, the outdoor

device must be properly grounded and surge protected, and you must install an

Hardware Installation Guide7Introduction

8-port Ultra60 PoE++ Multi-Gigabit (2.5G) Ethernet Plus Switch MS108EUP

Ethernet surge protector inline between the indoor product and the outdoor

device. Failure to do so can damage the product.

WARNING: Before connecting the product to outdoor cables or devices, see

https://kb.netgear.com/000057103 for additional safety and warranty information.

Failure to follow these guidelines can result in damage to your NETGEAR product,

which might not be covered by NETGEAR’s warranty, to the extent permissible by

applicable law.

•Observe and follow service markings:

- Do not service any product except as explained in your product documentation.

Some devices should never be opened.

-If applicable to your product, opening or removing covers that are marked with

the triangular symbol with a lightning bolt can expose you to electrical shock.

We recommend that only a trained technician services components inside these

compartments.

•If any of the following conditions occur, unplug the product from the power outlet,

and then replace the part or contact your trained service provider:

- Depending on your product, the power adapter, power adapter cable, power

cable, extension cable, or plug is damaged.

-An object fell into the product.

- The product was exposed to water.

- The product was dropped or damaged.

-The product does not operate correctly when you follow the operating

instructions.

•Keep the product away from radiators and heat sources. Also, do not block cooling

vents.

•Do not spill food or liquids on your product components, and never operate the

product in a wet environment. If the product gets wet, see the appropriate section

in your troubleshooting guide, or contact your trained service provider.

•Do not push any objects into the openings of your product. Doing so can cause fire

or electric shock by shorting out interior components.

•Use the product only with approved equipment.

•If applicable to your product, allow the product to cool before removing covers or

touching internal components.

Hardware Installation Guide8Introduction

8-port Ultra60 PoE++ Multi-Gigabit (2.5G) Ethernet Plus Switch MS108EUP

•Operate the product only from the type of external power source indicated on the

electrical ratings label. If you are not sure of the type of power source required,

consult your service provider or local power company.

•To avoid damaging your system, if your product uses a power supply with a voltage

selector, be sure that the selector is set to match the power at your location:

-115V, 60 Hz in most of North and South America and some Far Eastern countries

such as South Korea and Taiwan

- 100V, 50 Hz in eastern Japan and 100V, 60 Hz in western Japan

-230V, 50 Hz in most of Europe, the Middle East, and the Far East

•Be sure that attached devices are electrically rated to operate with the power available

in your location.

•Depending on your product, use only a supplied power adapter or approved power

cable:

If your product uses a power adapter:

-If you were not provided with a power adapter, contact your local NETGEAR

reseller.

-The power adapter must be rated for the product and for the voltage and current

marked on the product electrical ratings label.

If your product uses a power cable:

-If you were not provided with a power cable for your system or for any

AC-powered option intended for your system, purchase a power cable approved

for your country.

-The power cable must be rated for the product and for the voltage and current

marked on the product electrical ratings label. The voltage and current rating of

the cable must be greater than the ratings marked on the product.

•To help prevent electric shock, plug the system and peripheral power cables into

properly grounded power outlets.

•If applicable to your product, the peripheral power cables are equipped with

three-prong plugs to help ensure proper grounding. Do not use adapter plugs or

remove the grounding prong from a cable. If you must use an extension cable, use

a three-wire cable with properly grounded plugs.

•Observe extension cable and power strip ratings. Make sure that the total ampere

rating of all products plugged into the extension cable or power strip does not

exceed 80 percent of the ampere ratings limit for the extension cable or power strip.

Hardware Installation Guide9Introduction

8-port Ultra60 PoE++ Multi-Gigabit (2.5G) Ethernet Plus Switch MS108EUP

•To help protect your system from sudden, transient increases and decreases in

electrical power, use a surge suppressor, line conditioner, or uninterruptible power

supply (UPS).

•Position system cables, power adapter cables, or power cables carefully. Route

cables so that they cannot be stepped on or tripped over. Be sure that nothing rests

on any cables.

•Do not modify power adapters, power adapter cables, power cables or plugs. Consult

a licensed electrician or your power company for site modifications.

•Always follow your local and national wiring rules.

Hardware Installation Guide10Introduction

8-port Ultra60 PoE++ Multi-Gigabit (2.5G) Ethernet Plus Switch MS108EUP

Andere Handbücher für MS108EUP

Inhaltsverzeichnis

Andere NETGEAR Schalten Handbücher

NETGEAR

NETGEAR S3600 Series Bedienungsanleitung

NETGEAR

NETGEAR FS108 - ProSafe 10/100 Desktop Switch Bedienungsanleitung

NETGEAR

NETGEAR ProSafe GS105v3 Bedienungsanleitung

NETGEAR

NETGEAR ProSafe GS504 Bedienungsanleitung

NETGEAR

NETGEAR GS605AV Bedienungsanleitung

NETGEAR

NETGEAR GS724Tv3 - ProSafe Gigabit Managed Switch Bedienungsanleitung

NETGEAR

NETGEAR ProSAFE Plus GS108PEv3 Bedienungsanleitung

NETGEAR

NETGEAR GS418TPP Handbuch

NETGEAR

NETGEAR ProSafe GS108 Bedienungsanleitung

NETGEAR

NETGEAR GS504T - Switch Bedienungsanleitung

NETGEAR

NETGEAR Desktop Pro Series GS110MX Bedienungsanleitung

NETGEAR

NETGEAR GS305P Bedienungsanleitung

NETGEAR

NETGEAR GS724AT - ProSafe Gigabit Smart Switch Bedienungsanleitung

NETGEAR

NETGEAR FSM7328S - ProSafe Switch Bedienungsanleitung

NETGEAR

NETGEAR GS110TP - ProSafe Gigabit Smart Switch Bedienungsanleitung

NETGEAR

NETGEAR GSM7224 - Switch Bedienungsanleitung

NETGEAR

NETGEAR GS728TPS Smart Switch Bedienungsanleitung

NETGEAR

NETGEAR GS116 - ProSafe 16 Port Gigabit Desktop... Bedienungsanleitung

NETGEAR

NETGEAR ProSafe FS728TPv2 Bedienungsanleitung

NETGEAR

NETGEAR M5300 Series Bedienungsanleitung

NETGEAR

NETGEAR GSS108E Bedienungsanleitung

NETGEAR

NETGEAR ProSAFE GS108PEv3 Bedienungsanleitung

NETGEAR

NETGEAR GSM7328S - ProSafe Switch - Stackable Bedienungsanleitung

NETGEAR

NETGEAR GC728X Handbuch

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung