NETGEAR ProSafe XS712T Handbuch

350 East Plumeria Drive

San Jose, CA 95134

USA

March 2013

202-11253-01

v1.0

XS712T Smart Switch

Hardware Installation Guide

XS712T Smart Switch

Support

Thank you for selecting NETGEAR products.

After installing your device, locate the serial number on the label of your product and use it to register your product

at https://my.netgear.com. You must register your product before you can use NETGEAR telephone support.

NETGEAR recommends registering your product through the NETGEAR website. For product updates and web

support, visit http://support.netgear.com.

Phone (US & Canada only): 1-888-NETGEAR.

Phone (Other Countries): Check the list of phone numbers at

http://support.netgear.com/general/contact/default.aspx.

Trademarks

NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks of

NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. Information is subject to change

Revision History

Publication Part Number Version Publish Date Comments

202-11253-01 v1.0 March 2013 First publication

Contents | 3

Contents

Chapter 1 Introduction

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Chapter 2 Physical Description

Front Panel and Back Panel Configuration . . . . . . . . . . . . . . . . . . . . . . . . 10

LED Designations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Port LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

System LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Device Hardware Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

RJ-45 Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

SFP+ Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Reset Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Factory Defaults Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Chapter 3 Applications

Desktop Switching . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Backbone Switching . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Chapter 4 Installation

Step 1: Prepare the Site . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Step 2: Install the Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Install the Switch on a Flat Surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Install the Switch in a Rack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Step 3: Check the Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Step 4: Connect Devices to the Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Step 5: Install an SFP Transceiver Module . . . . . . . . . . . . . . . . . . . . . . . . 19

Step 6: Apply AC Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Step 7: Manage the Switch Using a Web Browser or the Smart Control Center Utility

Appendix A Troubleshooting

Troubleshooting Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Additional Troubleshooting Suggestions . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Network Adapter Cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

XS712T Smart Switch

Switch Integrity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Autonegotiation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Appendix B Technical Specifications

Network Protocol and Standards Compatibility . . . . . . . . . . . . . . . . . . . . . 26

Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

LEDs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Performance Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Physical Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Environmental Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Electromagnetic Emissions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Appendix C Notification of Compliance

1. Introduction

Congratulations on the purchase of your NETGEAR®ProSafeTM XS712T Smart Switch! Your

XS712T Smart Switch is a state-of-the-art, high-performance, IEEE-compliant network solution

designed for users who require many ports and want the power of Gigabit connectivity to

eliminate bottlenecks, boost performance, and increase productivity. There are 12 twisted-pair

ports on the front panel of the switch that support nonstop 100M/1000M/10G networks. The front

panel also has two SFP+ ports that support 1000M and 10G optical modules. To simplify

installation, the switch is shipped ready for use out of the box.

This installation guide describes how to install and power on the smart switch. The information in

this manual is intended for readers with intermediate computer and Internet skills.

This chapter serves as an introduction to the smart switch and includes the following sections:

•Overview

•Features

•Package Contents

XS712T Smart Switch

Overview

The NETGEAR XS712T Smart Switch provides 12 twisted-pair ports that support nonstop

100M/1000M/10G networks. The switch also has two built-in enhanced small form factor

pluggable (SFP+) GBIC combo slots that support 1000M and 10G optical modules.

Using these Gigabit slots, you can create high-speed connections to a server or network

backbone. For example, you can:

•Connect switches to each other with high-speed links

•Link to high-speed servers

•Provide 100M/1000M/10G copper and 1000M/10G fiber connectivity

The smart switch also provides the benefit of administrative management with a complete

package of features for the observation, configuration, and control of the network. Using the

simple and intuitive web-based graphical user interface (GUI), you can view and use the

switch’s many capabilities. The switch’s management features include configuration for port

and switch information, VLAN for traffic control, port trunking for increased bandwidth, and

Class of Service (CoS) for prioritizing traffic. These features provide better understanding and

control of the network. Initial discovery of the switch on the network requires the Smart

Control Center program, a utility that runs on a Windows computer.

The smart switch can be freestanding or rack mounted in a wiring closet or equipment room.

It is IEEE-compliant and offers low latency for high-speed networking. All ports can

automatically negotiate to the highest speed, which makes the switch ideal for environments

that have a mix of Ethernet, Fast Ethernet, Gigabit Ethernet, or 10-Gigabit Ethernet devices.

Category 5e (Cat 5e) or better Ethernet cable (Cat 6, Cat 6a, or Cat 7) can be used to make

10G connections. Cat 6a or Cat 7 cables are recommended if the cable distance is greater

than 45 meters (148 feet).

Features

The following lists the key features of the XS712T Smart Switch:

•Twelve 100M/1000M/10G AutoSensing Gigabit Ethernet switching ports.

•Two 1000M/10G SFP+ combo ports.

•Full NETGEAR Smart Switch functionality.

•Full compatibility with IEEE standards:

-IEEE 802.3u (100BASE-TX)

-IEEE 802.3ab (1000BASE-T)

-IEEE 802.3z (1000BASE-x)

-IEEE 802.3an (10GBASE-T)

-IEEE 802.3 Clause 49 (10GBASE-LR and 10GBASE-SR)

-IEEE802.aq (10GBASE-LRM)

XS712T Smart Switch

-IEEE802.3ae (10GBASE Ethernet)

-IEEE802.3az (Energy Efficient Ethernet)

-IEEE 802.3x (full-duplex flow control)

•AutoSensing and autonegotiating capabilities for all ports.

•Auto Uplink™ on all ports to make the right connection.

•Automatic address learning function to build the packet-forwarding information table. The

table contains up to 32K Media Access Control (MAC) addresses.

•Store-and-forward transmission to remove bad packets from the network.

•Full-duplex IEEE 802.3x pause frame flow control.

•Active flow control to minimize packet loss and frame drops.

•Half-duplex backpressure control.

•Per-port LEDs and Power LED.

•Internal open frame power supply.

•Standard NETGEAR 7xx series chassis (1U high).

Package Contents

The following figure shows the package contents of the smart switch.

Green=Link at 1G

Yellow=Link at 10/

100M

Power

Reset

Fan

Stack

Master

Factory

Defaults

12345678910 11 13 15 17 19 21

12 2214 16 18 20 23 25 27 29 31 33

24 3426 28 30 32 35 37 39 41 43 45 47

36 38 40 42 44 46 48

GS752TXS

50F

49F

Green=10G Link Yellow=1G

Blink=ACT

SFP

52F

51F

Link/Act Mode —

Power

Reset

Fan

Factory

Defaults

XS712T

1 2 3 4 5 6 7 8 9 10 11T

11F 12F

12T

Figure 1. Package contents

Verify that the package contains the following:

•XS712T Smart Switch

XS712T Smart Switch

•Rubber footpads for tabletop installation

•Rack-mounting kits

•Power cord

•Installation guide

•Smart switch resource CD with NETGEAR Smart Control Center and user’s manual

If any item is missing or damaged, contact the place of purchase immediately.

2. Physical Description

This chapter describes the XS712T Smart Switch hardware features. Topics include:

•Front Panel and Back Panel Configuration

•LED Designations

•Device Hardware Interfaces

XS712T Smart Switch

Front Panel and Back Panel Configuration

The smart switch has 12 100M/1000M/10G copper ports and two combo 1000 Mbps/10 Gbps

SFP+ fiber ports. Each port is capable of sensing the line speed and negotiating the duplex

mode with the link partner automatically.

The following figure illustrates the front panel of the smart switch.

Power

Reset

Fan

Factory

Defaults

XS712T

1 2 3 4 5 6 7 8 9 10 11T

11F 12F

12T

Power and Link/Speed/ACT LEDs 100M/10G

SFP ports

Reset button

Factory

Defaults button

Fan LEDs

100M/1000M/10G Ethernet ports

Figure 2. Front panel

The front panel contains the following:

•12 RJ-45 connectors for 100M/1000M/10G AutoSensing Gigabit Ethernet switching ports

•Two combo 1000 Mbps/10 Gbps SFP+ Gigabit Ethernet switching ports

•Reset button to restart the device

•Recessed Factory Defaults button to restore the device back to the factory defaults

•Link, Speed, and ACT LEDs for each port

•Power and Fan LEDs

The following figure illustrates thesmart switch back panel.

Power connector

Kensington Lock™ slot

Figure 3. Back panel

The back panel contains a power connector.

LED Designations

The following sections describe the LED designations.

Andere Handbücher für ProSafe XS712T

Inhaltsverzeichnis

Andere NETGEAR Schalten Handbücher

NETGEAR

NETGEAR FS2105 Bedienungsanleitung

NETGEAR

NETGEAR FS605 v3 Bedienungsanleitung

NETGEAR

NETGEAR GS308PP Bedienungsanleitung

NETGEAR

NETGEAR FS728TP - ProSafe 24 Port 10/100 Smart... Bedienungsanleitung

NETGEAR

NETGEAR GS308 Bedienungsanleitung

NETGEAR

NETGEAR GSM712F - Managed Fiber Gigabit Switch Bedienungsanleitung

NETGEAR

NETGEAR ProSafe GSM7252PS Bedienungsanleitung

NETGEAR

NETGEAR ProSafe Plus GS108PE Bedienungsanleitung

NETGEAR

NETGEAR FSM7328S - ProSafe Switch Handbuch

NETGEAR

NETGEAR GS724TP - ProSafe Smart PoE Switch Bedienungsanleitung

NETGEAR

NETGEAR ProSafe Plus GS116E Bedienungsanleitung

NETGEAR

NETGEAR ProSafe GS510TP Bedienungsanleitung

NETGEAR

NETGEAR PROSAFE XS716E Bedienungsanleitung

NETGEAR

NETGEAR ProSAFE M6100 XCM8944 Bedienungsanleitung

NETGEAR

NETGEAR Universal Pro XS508M Bedienungsanleitung

NETGEAR

NETGEAR ProSafe JGS516 Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

NETGEAR

NETGEAR FSM7226RS - ProSafe Switch - Stackable Bedienungsanleitung

NETGEAR

NETGEAR GSM7212 - ProSafe Switch Bedienungsanleitung

NETGEAR

NETGEAR GS305Pv2 Bedienungsanleitung

NETGEAR

NETGEAR MS510TX Bedienungsanleitung

NETGEAR

NETGEAR FSM726E - ProSafe Switch Bedienungsanleitung

NETGEAR

NETGEAR GSS108E Bedienungsanleitung

NETGEAR

NETGEAR GSM7248R - ProSafe Switch Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung