NETGEAR MBR1210-1BMCNS - This Product is a Special... Bedienungsanleitung

Getting started guide

Turbo Hub

NETGEAR® MBR1210

Welcome and thanks for choosing Bell. Your

new Turbo Hub will enable you to connect to

the Internet. This guide will provide you with

an overview of your Turbo Hub and steps for

getting started.

A Turbo Hub User Guide CD is included in the

box for additional installation information.

SETUP

Choosing a location 2

Inserting your Bell SIM card 3

Connecting the power cord 4

Start-up 5

USING YOUR TURBO HUB

Connecting a computer through Ethernet 6

Connecting a device through Wi-Fi 6

TROUBLESHOOTING

Button and LED indicator legend 7

FAQs 10

Technical Support 1 1

SETUP

Before using your Turbo Hub, please ensure you have the following:

• A Bell Turbo Hub Flex Plan

• Your Mobile Directory Number (MDN) or phone number

If you don’t have an account or a Turbo Hub Flex Plan or number, get

set up by speaking with a Bell account representative at 1-888-4MOBILE

(1-888-466-2453).

Choosing a location for your Turbo Hub

Always select an indoor location, preferably close to a window but avoiding

direct sunlight. A window location generally will give the best conditions for

accessing the Internet.

For best results, place the Turbo Hub away from microwave ovens and other

transmitters (e.g. security/alarm systems) as they can cause signal interference.

Using the stand provided, you can position your Turbo Hub upright by inserting

the tabs of the stand into the slot on the bottom of the Hub.

Inserting your Bell SIM card

Before turning the device on, follow the steps below:

1. Locate the SIM card slot on the back of the device.

2. Gently insert your Bell SIM card into the SIM card slot.

3. Ensure that the SIM card is inserted into the Turbo Hub with its bevelled

edge facing up, as illustrated. You should hear a “click” sound when the

SIM card has been inserted properly.

Note: You must use the SIM card you received with the Turbo Hub. SIM cards

from other devices will not function in the Turbo Hub. Similarly, the SIM

card provided with the Turbo Hub will not function in other devices.

WANANTENNA

MBRN3300E

Mobile HSPA Broadband 11n Wireless Router

SIM

1.5

FCC ID: PY309300121

IC ID: 4054A-09300121

IMEI

WAN WiFiLAN PowerInternet

gnal 2G/3G

74901N

Z1067

BLINK = ACTIVITY

LAN: GREEN =100 Mbps / AMBER =10 Mbps

This device complies with Part 15 of the FCC Rules. Operation is subject

to the following two conditions: (1) This device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation

272-11000-01

Connecting the power cord

• Connect the cable from the enclosed power adapter to the power adapter

input on the back of the Turbo Hub and insert the plug into an outlet.

• Power on the device (press the round button on back of device).

WANANTENNA

MBRN3300E

Mobile HSPA Broadband 11n Wireless Router

SIM

1.5

FCC ID: PY309300121

IC ID: 4054A-09300121

IMEI

WAN WiFiLAN PowerInternetSignal 2G/3G

74901N

Z1067

BLINK = ACTIVITY

LAN: GREEN =100 Mbps / AMBER =10 Mbps

This device complies with Part 15 of the FCC Rules. Operation is subject

to the following two conditions: (1) This device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation

272-11000-01

Power On/Off Button

Start-up

• Allow approximately one minute for the Turbo Hub to boot/start-up.

When the start-up procedure is ﬁnished, the following should occur:

1. The Power button will show amber for a moment and then

turn to a steady green. A solid amber light indicates the unit has failed

to power-on.

2. When a high-speed connection is established to the Bell HSPA+

network, the 2G/3G indicator will be lit up in solid blue.

3. The Wi-Fi indicator will show solid blue.

4. The Internet Port indicator will show green.

5. The Signal Quality indicator shows the quality of the signal

from the Bell HSP+ network.

a. Solid blue: Excellent coverage

b. Solid green: Good coverage

c. Solid amber: Minimal coverage

d. Off: No coverage

If any of these conditions does not occur, refer to the Troubleshooting section

starting on page 7.

USING YOUR TURBO HUB

Connecting your computer through an Ethernet cable

• Attach the enclosed Ethernet cable to one of the Ethernet connectors

(1 – 4) on the back of the Turbo Hub.

• Connect the other end of the Ethernet connector to a PC/laptop.

• Launch your Internet browser and you’re online.

You can connect up to four (4) computers using the Ethernet ports. One shielded

Ethernet cable is included.

Note: If connecting additional PCs, use only shielded Ethernet cables in order to

fulﬁll electrical emissions requirements (CE, FCC).

Connecting your device through Wi-Fi

Wi-Fi security has been enabled on your Turbo Hub. To connect through Wi-Fi,

enter the following on your Wi-Fi-enabled PC/laptop or device:

• The Wi-Fi Network Name (SSID). You can ﬁnd your Wi-Fi Network Name

(SSID) printed on the back of your Turbo Hub. The Wi-Fi Network Name

(SSID) will be BellXXXX, where XXXX is random numbers or letters.

• The WPA Passphrase. You can ﬁnd your WPA Passphrase printed on the

back of the Turbo Hub, under the title “WPA/WPA2 – PSK Passphrase.”

• Launch your Internet browser and you’re online.

Note: You can connect up to 15 devices using Ethernet and/or Wi-Fi.

TROUBLESHOOTING

Button and LED indicator legend

Below is a list of LED indicators & buttons which outline the status of your Turbo Hub:

LED Symbol Status Description

WPS

Press this button to open a 2-minute window for the Turbo

Hub to connect with other WPS-enabled devices. For more

information about this function, see the Using Push ‘N’ Connect

(WPS) To Conﬁgure Your Wireless Network section of the User

Guide CD.

Wi-Fi

This button is used to turn the Wi-Fi radio on and off.

Power

Solid green The router is powered on and

operating normally.

Solid amber POST (Power-On Self-Test) in progress.

Off Power is not supplied to the router.

Internet Port

Solid green There is an Internet connection.

Blinking green Data is being transmitted over the

Internet connection.

Off No Internet connection detected.

LED Symbol Status Description

Wi-Fi

Solid blue The Wi-Fi local port is initialized.

Blinking blue Data is being transmitted or received over

the Wi-Fi link.

Off The wireless access point is turned off.

LAN Ports

Solid green The local Ethernet ports have detected wired

links with PCs.

Blinking Data is being transmitted or received.

Off No link is detected on these ports.

WAN Port

Solid green The Ethernet WAN port has detected an

active link.

Blinking Data is being transmitted or received.

Off No link is detected on these ports.

2G/3G

Solid blue Indicates the Turbo Hub is in 3G+ coverage.

Blinking Indicates the Turbo Hub is in 2G coverage.

Off No coverage is detected.

LED Symbol Status Description

Signal Quality

Solid blue Excellent coverage detected.

Solid green Good coverage detected.

Solid amber Minimal coverage detected.

Off No coverage detected.

TROUBLESHOOTING (cont’d...)

Button and LED indicator legend

Andere Handbücher für MBR1210-1BMCNS - This Product is a Special...

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere NETGEAR Schalten Handbücher

NETGEAR

NETGEAR ProSAFE GS108PEv3 Bedienungsanleitung

NETGEAR

NETGEAR ProSAFE Plus GS108PEv3 Bedienungsanleitung

NETGEAR

NETGEAR M4100 Series ProSAFE Bedienungsanleitung

NETGEAR

NETGEAR ProSafe GS108 Bedienungsanleitung

NETGEAR

NETGEAR ProSAFE GS105PE Bedienungsanleitung

NETGEAR

NETGEAR GSM7328Sv2 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable... Bedienungsanleitung

NETGEAR

NETGEAR ProSafe GS116v2 Bedienungsanleitung

NETGEAR

NETGEAR GS116 - ProSafe 16 Port Gigabit Desktop... Bedienungsanleitung

NETGEAR

NETGEAR ProSafe JGS524 v2 Bedienungsanleitung

NETGEAR

NETGEAR ProSafe XS712T Handbuch

NETGEAR

NETGEAR GSS108E Bedienungsanleitung

NETGEAR

NETGEAR ProSAFE S3300 Handbuch

NETGEAR

NETGEAR FS 524S Bedienungsanleitung

NETGEAR

NETGEAR ProSafe FS728TPv2 Handbuch

NETGEAR

NETGEAR FS108 - ProSafe 10/100 Desktop Switch Bedienungsanleitung

NETGEAR

NETGEAR ProSAFE FS726Tv2 Bedienungsanleitung

NETGEAR

NETGEAR EN516 - Hub - EN Bedienungsanleitung

NETGEAR

NETGEAR EN516 - Hub - EN Bedienungsanleitung

NETGEAR

NETGEAR GS110EMX Bedienungsanleitung

NETGEAR

NETGEAR M4100 Series ProSAFE Bedienungsanleitung

NETGEAR

NETGEAR MVBR1210C Bedienungsanleitung

NETGEAR

NETGEAR FS205v2 Bedienungsanleitung

NETGEAR

NETGEAR ProSafe Plus FS116E Bedienungsanleitung

NETGEAR

NETGEAR ProSafe GS700TP Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Bedienungsanleitung

Cisco

Cisco Catalyst X4448 Handbuch