NETGEAR XS728T ProSAFE Handbuch

350 East Plumeria Drive

San Jose, CA 95134

USA

March 2016

202-11637-01

ProSAFE 28-Port and 48-Port

10-Gigabit Smart Managed Switch

Models XS728Tand XS748T

Hardware Installation Guide

ProSAFE 28-Port and 48-Port 10-Gigabit Smart Managed Switch Models XS728Tand XS748T

Support

Thank you for purchasing this NETGEAR product. You can visit www.netgear.com/support to register your product, get help,

access the latest downloads and user manuals, and join our community. We recommend that you use only official NETGEAR

support resources.

Conformity

For the current EU Declaration of Conformity, visit http://kb.netgear.com/app/answers/detail/a_id/11621.

Compliance

For regulatory compliance information, visit http://www.netgear.com/about/regulatory.

See the regulatory compliance document before connecting the power supply.

Trademarks

used for reference purposes only.

Revision History

Publication Part Number Publish Date Comments

202-11637-01 March 2016 First publication

Contents | 3

Contents

Chapter 1 Introduction

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Safety Instructions and Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Chapter 2 Hardware Overview

Hardware Overview Model XS728T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Front Panel Model XS728T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Back Panel Model XS728T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

System and Port LEDs Model XS728T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Hardware Overview Model XS748T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Front Panel Model XS748T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Back Panel Model XS748T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

System and Port LEDs Model XS748T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Switch Hardware Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

1G/10G RJ-45 Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

1000/10GBASE-X SFP+ Slots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

USB Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Reset Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Factory Defaults Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Chapter 3 Applications

Desktop Switching . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Backbone Switching. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

High-Speed Network Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Chapter 4 Installation

Step 1: Prepare the Site. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

Step 2: Protect Against Electrostatic Discharge . . . . . . . . . . . . . . . . . . . . . . . . . .23

Step 3: Unpack the Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

Step 4: Install the Switch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

Install the Switch on a Flat Surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

Install the Switch in a Rack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

Step 5: Check the Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

Optional Step 6: Install an SFP Transceiver Module . . . . . . . . . . . . . . . . . . . . . . .26

Step 7: Connect Devices to the Switch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27

Step 8: Apply AC Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27

ProSAFE 28-Port and 48-Port 10-Gigabit Smart Managed Switch Models XS728Tand XS748T

Step 9: Manage the Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Appendix A Troubleshooting

Troubleshooting Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Additional Troubleshooting Suggestions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

1. Introduction

This hardware installation guide is for the following NETGEAR®ProSAFE®Smart Managed

Switches:

•Model XS728T 28-Port 10-Gigabit Smart Managed Switch

•Model XS748T 48-Port 10-Gigabit Smart Managed Switch

These models provide twenty-four or forty-four 1000/10GBASE-T RJ-45 copper ports and four

dedicated enhanced small form-factor pluggable (SFP+) GBIC slots that can accept SFP+ 1G

and 10G copper and fiber optical modules.

In this hardware installation guide, except where indicated otherwise, these models are referred

to as the switch. This hardware installation guide complements the installation guide that came

with the switch.

The chapter includes the following sections:

•Overview

•Features

•Safety Instructions and Warnings

Note: For more information about the topics that are covered in this manual,

visit the support website at www.support.netgear.com.

Note: For detailed technical specifications and information about supported

features, see the datasheet:

For model XS728T, visit www.netgear.com/XS728T.

For model XS748T, visit www.netgear.com/XS748T.

Note: For software and configuration documentation, see the links on the

resource CD in the product package or visit downloadcenter.netgear.com.

Introduction

ProSAFE 28-Port and 48-Port 10-Gigabit Smart Managed Switch Models XS728Tand XS748T

Overview

The switch provides twenty-four or forty-four 1000/10GBASE-T RJ-45 copper ports that

support nonstop 1G/10G Layer 2 and Layer 3 networks. The switch also provides four

dedicated enhanced small form-factor pluggable (SFP+) slots that can accept 1GBASE and

10GBASE copper and fiber optical modules, or Direct Attach Cables (DAC) for short distance

inter-switch connections.

Using the 10G ports, you can create high-speed connections to a server, network attached

storage (NAS) system, or backbone network. For example, you can do the following:

•Connect switches to each other with high-speed links

•Link to high-speed servers

•Provide 1G/10G copper and 1G/10G fiber connectivity

The switch provides administrative management options that let you configure, monitor, and

control the network. Using the web browser-based management interface, you can configure

the switch and the network, including the ports, the management VLAN, VLANs for traffic

control, link aggregation for increased bandwidth, quality of service (QoS) for prioritizing

traffic, and network security.

Initial discovery of the switch on the network requires the Smart Control Center program,

which runs on a Windows-based computer and is included on the resource CD. If you do not

use a Windows-based computer, get the IP address of the switch from the DHCP server in

the network or use an IP scanner utility.

After discovery, you can configure the switch using the web browser-based management

interface for advanced setup and configuration of features, or the Smart Control Center

program for very basic setup. For more information, see the user manual that you can

download from downloadcenter.netgear.com.

You can install the switch freestanding or rack mounted in a wiring closet or equipment room.

The switch is IEEE compliant and offers low latency for high-speed networking. All ports can

automatically negotiate to the highest speed, which makes the switch very suitable for a

mixed environment with Gigabit Ethernet and 10-Gigabit Ethernet devices.

Use Category 5e (Cat 5e) or higher rated Ethernet cables (Cat 6, Cat 6a, or Cat 7) to make

10G connections. For 10G speeds, if the cable distance is greater than 148 feet (45 meters),

we recommend that you use a Cat 6a cable or higher rated cable.

Introduction

ProSAFE 28-Port and 48-Port 10-Gigabit Smart Managed Switch Models XS728Tand XS748T

Features

The following list describes the key features of the switch:

•Twenty-four (model XS728T) or forty-four (model XS748T) 1000/10GBASE-T switching

ports.

•Four dedicated SFP+ slots for 1GBASE and 10GBASE copper and fiber optical modules

or Direct Attach Cables (DAC).

•One USB port (for configuration files, firmware, and debug logs)

•Full NETGEAR Smart Managed Switch functionality.

•Full compatibility with IEEE standards:

-IEEE 802.3 Ethernet

-IEEE 802.3z Gigabit Ethernet 1000BASE-SX/LX

-IEEE 802.3an 10GBASE-T 10 Gbit/s Ethernet over copper twisted-pair cable

-IEEE 802.3ae 10-Gigabit Ethernet over fiber (10GBASE-SR, 10GBASE-LR)

-IEEE 802.3ab 1000BASE-T

-IEEE 802.1Q VLAN tagging

-IEEE 802.3x Full-duplex flow control

-IEEE 802.3ad Link Aggregation (LAG with LACP)

-IEEE 802.1AB LLDP with ANSI/TIA-1057 (LLDP-MED)

-IEEE 802.1p Class of Service (QoS and DSCP)

-IEEE 802.1D Spanning Tree Protocol (STP)

-IEEE 802.1s Multiple Spanning Tree Protocol (MSTP)

-IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)

-IEEE 802.1x RADIUS Network Access Control

-IEEE 802.3az Energy Efficient Ethernet (EEE)

•AutoSensing and auto-negotiation capabilities for all ports.

•Auto Uplink™ on all ports to make the right connection.

•Automatic address learning function to build the packet-forwarding information table. The

table contains up to 16K Media Access Control (MAC) addresses.

•Store-and-forward transmission to remove bad packets from the network.

•Full-duplex IEEE 802.3x pause frame flow control.

•Active flow control to minimize packet loss and frame drops.

•Jumbo frames up to 10K bytes.

•Static or LACP LAGs (12 LAGs with up to 8 members per LAG for model XS728T;

24 LAGs with up to 8 members per LAG for model XS748T).

•Per-port LEDs and system status LEDs.

•Internal open-frame power supply.

•Standard NETGEAR chassis (1U high).

Introduction

ProSAFE 28-Port and 48-Port 10-Gigabit Smart Managed Switch Models XS728Tand XS748T

•NETGEAR green power-saving features:

-Energy efficiency mode that fully conforms to the IEEE 802.3az standard.

-Per-port automatic change to a lower power mode when the port link is down.

Safety Instructions and Warnings

Use the following safety guidelines to ensure your own personal safety and to help protect

your system from potential damage.

To reduce the risk of bodily injury, electrical shock, fire, and damage to the equipment,

observe the following precautions:

•This product is designed for indoor use only in a temperature-controlled (0–50°C) and

humidity-controlled (10–90 percent relative humidity) environment.

Any device that is located outdoors and connected to this product must be properly

grounded and surge protected.

To the extend permissible by applicable law, failure to follow these guidelines could result

in damage to your NETGEAR product, which may not be covered by NETGEAR’s

warranty.

•Observe and follow service markings:

-Do not service any product except as explained in your system documentation.

-Opening or removing covers that are marked with the triangular symbol with a

lightning bolt can expose you to electrical shock. We recommend that only a trained

technician services components inside these compartments.

•If any of the following conditions occur, unplug the product from the electrical outlet and

replace the part or contact your trained service provider:

-The power cable, extension cable, or plug is damaged.

-An object fell into the product.

-The product was exposed to water.

-The product was dropped or damaged.

-The product does not operate correctly when you follow the operating instructions.

•Keep your system away from radiators and heat sources. Also, do not block cooling

vents.

•Do not spill food or liquids on your system components, and never operate the product in

a wet environment.

•Do not push any objects into the openings of your system. Doing so can cause fire or

electric shock by shorting out interior components.

•Use the product only with approved equipment.

•Allow the product to cool before removing covers or touching internal components.

Introduction

ProSAFE 28-Port and 48-Port 10-Gigabit Smart Managed Switch Models XS728Tand XS748T

•Operate the product only from the type of external power source indicated on the

electrical ratings label. If you are not sure of the type of power source required, consult

your service provider or local power company.

•To avoid damaging your system, be sure that the voltage selection switch (if provided) on

the power supply is set to match the power at your location.

The switch supports an input power rating of 100–240V, 50–60 Hz.

•Be sure that attached devices are electrically rated to operate with the power available in

your location.

•Use only approved power cables. If you were not provided with a power cable for your

system or for any AC-powered option intended for your system, purchase a power cable

approved for your country. The power cable must be rated for the product and for the

voltage and current marked on the product electrical ratings label. The voltage and

current rating of the cable must be greater than the ratings marked on the product.

•To help prevent electric shock, plug the system and peripheral power cables into properly

grounded electrical outlets.

•The peripheral power cables are equipped with three-prong plugs to help ensure proper

grounding. Do not use adapter plugs or remove the grounding prong from a cable. If you

must use an extension cable, use a three-wire cable with properly grounded plugs.

•Observe extension cable and power strip ratings. Make sure that the total ampere rating

of all products plugged into the extension cable or power strip does not exceed 80

percent of the ampere ratings limit for the extension cable or power strip.

•To help protect your system from sudden, transient increases and decreases in electrical

power, use a surge suppressor, line conditioner, or uninterruptible power supply (UPS).

•Position system cables and power cables carefully. Route cables so that they cannot be

stepped on or tripped over. Be sure that nothing rests on any cables.

•Do not modify power cables or plugs. Consult a licensed electrician or your power

company for site modifications.

•Always follow your local and national wiring rules.

2. Hardware Overview

This chapter describes the switch hardware features and includes the following sections:

•Hardware Overview Model XS728T

•Hardware Overview Model XS748T

•Switch Hardware Interfaces

Andere Handbücher für XS728T ProSAFE

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere NETGEAR Schalten Handbücher

NETGEAR

NETGEAR Pro GS108PP Bedienungsanleitung

NETGEAR

NETGEAR GSM7312 - ProSafe Layer 3 Managed Gigabit... Bedienungsanleitung

NETGEAR

NETGEAR GS110TP - ProSafe Gigabit Smart Switch Bedienungsanleitung

NETGEAR

NETGEAR ProSafe GSM7212P Bedienungsanleitung

NETGEAR

NETGEAR GS108T-200NAS Bedienungsanleitung

NETGEAR

NETGEAR GSM7212 - ProSafe Switch Handbuch

NETGEAR

NETGEAR FSM726E - ProSafe Switch Handbuch

NETGEAR

NETGEAR GSM7328S - ProSafe Switch - Stackable Bedienungsanleitung

NETGEAR

NETGEAR FSM7352PS - ProSafe 48 Port 10/100 L3 Managed Stackable... Bedienungsanleitung

NETGEAR

NETGEAR GSM7224 - Switch Bedienungsanleitung

NETGEAR

NETGEAR ProSAFE GS724Tv4 Bedienungsanleitung

NETGEAR

NETGEAR ProSafe GS108 Bedienungsanleitung

NETGEAR

NETGEAR MS108TUP Handbuch

NETGEAR

NETGEAR ProSafe JGSM7224 Bedienungsanleitung

NETGEAR

NETGEAR FSM7326P - ProSafe Managed Switch Bedienungsanleitung

NETGEAR

NETGEAR FSM7226RS - ProSafe Switch - Stackable Bedienungsanleitung

NETGEAR

NETGEAR GSM7212 - ProSafe Switch Bedienungsanleitung

NETGEAR

NETGEAR ProSAFE GS105Ev2 Bedienungsanleitung

NETGEAR

NETGEAR ProSafe GS116 Bedienungsanleitung

NETGEAR

NETGEAR XS728T ProSAFE Bedienungsanleitung

NETGEAR

NETGEAR ProSafe GS516TP Bedienungsanleitung

NETGEAR

NETGEAR GS605 - Gigabit Desktop Switch Bedienungsanleitung

NETGEAR

NETGEAR FS116 Bedienungsanleitung

NETGEAR

NETGEAR ProSAFE Plus GS108Ev3 Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung