NETGEAR WAX204 Bedienungsanleitung

Installation Guide

Business WiFi 6 AX1800 Access Point

WAX204

Package contents

• Wireless access point

• DC power adapter (varies by region)

• Ethernet cable

• Installation guide

1. Unplug the modem’s power, leaving the modem connected to the wall jack

for your Internet service. (If the modem uses a battery backup, remove the

battery.)

2. Connect the Ethernet cable to the yellow Internet port on the WAX204.

3. Connect the other end of the cable to a LAN port on your modem.

4. Plug in and turn on the modem. (If the modem uses a battery backup, put the

battery back in before you turn on the modem.)

5. Power on the WAX204 and check that the LEDs are lit.

Step 2. Join the default WiFi network

The default WiFi network name (SSID) is “NETGEARXXXXXX”, where XXXXXX

represents the last 6 characters of the device’s MAC Address, as printed on the

WAX204 label. By default, the WAX204’s WiFi network provides WPA2 security.

A randomly generated unique WiFi password is printed on a label on the device.

We recommend that you change the WiFi password to a more secure password

for the default SSID and for the two other SSIDs. For more information, see the

user manual.

To connect your WiFi device to the WAX204’s WiFi network, you can use either

the manual method or the Wi-Fi Protected Setup (WPS) method.

Join the WiFi network using the manual method

1. Open the software utility that manages your WiFi connections on the WiFi

device that you want to connect to the WAX204.

This utility scans for all WiFi networks in your area.

2. Find and select the WAX204’s WiFi network name (SSID) and connect to its

WiFi network.

The default WiFi network name (SSID) is “NETGEARXXXXXX”, where XXXXXX

represents the last 6 characters of the device’s MAC Address.

Enter the default passphrase printed on the WAX204 label.

Join the WiFi network using the WPS method

The WAX204’s WPS button is on the back panel. If your computer or mobile

device supports WPS, you can use WPS to join the WAX204’s WiFi network. See

the instructions or online help for your computer or mobile device.

Step 1. Connect the WAX204

Sample connections

WiFi client

Modem

Internet

Continued on the other side

Step 3. Log in to the WAX204

1. Launch a web browser and enter http://www.routerlogin.net in the

address eld.

The Smart Setup Wizard starts.

2. Follow the Smart Setup Wizard prompts.

3. During the setup process, you are required to set a new admin password for

local login. After you set the new password, you must log back in using the

new password.

4. You can also update the rmware if a new version is available.

Note: If you cannot connect the WAX204 to the Internet, see the user

manual for troubleshooting information and instructions on how to log in to

the WAX204 without Internet access.

Note: When the WAX204 is connected to the Internet, the NETGEAR

Business page displays with multiple login and registration options. You can

skip registration and log in to the local browser-based user interface (UI)

temporarily to congure the device.

are trademarks of NETGEAR, Inc. Any non‑NETGEAR

trademarks are used for reference purposes only.

Sample access point connections

Modem

Internet WAX204 in

access point mode

WiFi device

Network router

Support and Community

Visit netgear.com/support to get your questions answered and access the latest

downloads.

You can also check out our NETGEAR Community for helpful advice at

community.netgear.com.

Regulatory and Legal

Si ce produit est vendu au Canada, vous pouvez accéder à ce document en

français canadien à https://www.netgear.com/support/download/.

(If this product is sold in Canada, you can access this document in Canadian

French at https://www.netgear.com/support/download/.)

For regulatory compliance information including the EU Declaration of

Conformity, visit https://www.netgear.com/about/regulatory/.

See the regulatory compliance document before connecting the power supply.

For NETGEAR’s Privacy Policy, visit https://www.netgear.com/about/privacy-policy.

By using this device, you are agreeing to NETGEAR’s Terms and Conditions at

https://www.netgear.com/about/terms-and-conditions. If you do not agree, return

the device to your place of purchase within your return period.

Do not use this device outdoors. The PoE source is intended for intra building

connection only.

NETGEAR, Inc.

350 East Plumeria Drive

San Jose, CA 95134, USA

NETGEAR INTERNATIONAL LTD

Floor 1, Building 3

University Technology Centre

Curraheen Road, Cork,

T12EF21, Ireland

Use the WAX204 in access point mode

September2020

You can cable the WAX204 to your network router and then set the WAX204 to

access point mode.

1. Connect the Ethernet cable to the yellow Internet port on the WAX204.

2. Connect the other end of the cable to a LAN port on your network router.

Your network router must support a DHCP server, so that it assigns an IP

address to the WAX204 and its clients, and provides Internet access.

3. Power on the WAX204 and check that the LEDs are lit.

4. Select ADVANCED > Advanced Setup > Router / AP / Bridge Mode.

5. Select the AP Mode radio button.

6. Tap the Apply button.

Your settings are saved and the WAX204 is recongured in access point

mode. The WAX204 routing functions are disabled and it is assigned a new

IP address.

7. Follow the onscreen instructions to log in to the admin interface again.

Note: For more information about conguring the WAX204, see the user

manual.

5. To register and activate your product warranty, tap the LOG IN with

NETGEAR account button.

The NETGEAR Account Login page displays.

Note: If you do not own a NETGEAR account, tap the Create account link,

create a NETGEAR account, and log in.

6. Enter your NETGEAR account email address and password, and then tap the

The Local device login page displays.

IMPORTANT: After the WAX204 is registered and you log in with your NETGEAR

account, you can use the local device password for future logins.

7. Log in using your local device password.

The BASIC > Home page displays.

8. Congure the country and region where you are using the WAX204. Select

Advanced > Advanced Setup > Wireless Settings > Region Selection.

Note: The country or region is not selectable for the U.S. and Canada.

Note: Make sure that the country is set to the location where the device is

operating. You are responsible for complying with the local, regional, and

national regulations for channels, power levels, and frequency ranges.

9. Click the Apply button.

Your settings are saved.

For more information, see Use the WAX204 in access point mode.

If you do not want to use the WAX204 in access point mode, you can continue

to use the WAX204 in router mode and congure the WAX204 for your

environment. For more information, see the user manual.

Andere Handbücher für WAX204

Andere NETGEAR Drahtloser Zugangspunkt Handbücher

NETGEAR

NETGEAR ProSafe WNAP320 Bedienungsanleitung

NETGEAR

NETGEAR WNDAP350 - ProSafe 802.11n Dual Band Wireless Access... Bedienungsanleitung

NETGEAR

NETGEAR WND930 Bedienungsanleitung

NETGEAR

NETGEAR WNHDE111-100NAS Bedienungsanleitung

NETGEAR

NETGEAR WAX630E Bedienungsanleitung

NETGEAR

NETGEAR WN604 - Wireless-N 150 Access Point Bedienungsanleitung

NETGEAR

NETGEAR WAG302 Bedienungsanleitung

NETGEAR

NETGEAR AirBridge WBC502 Handbuch

NETGEAR

NETGEAR WAC720 Bedienungsanleitung

NETGEAR

NETGEAR ProSafe WNAP320 Bedienungsanleitung

NETGEAR

NETGEAR WAX638E Bedienungsanleitung

NETGEAR

NETGEAR WG102 - ProSafe Wireless Access Point Bedienungsanleitung

NETGEAR

NETGEAR WG302v1 - ProSafe 802.11g Wireless Access... Montageanleitung

NETGEAR

NETGEAR WAX206 Bedienungsanleitung

NETGEAR

NETGEAR WAC510 Bedienungsanleitung

NETGEAR

NETGEAR FWG114Pv2 - Wireless Firewall With USB Print... Bedienungsanleitung

NETGEAR

NETGEAR WAC104 Bedienungsanleitung

NETGEAR

NETGEAR WG302v2 - ProSafe 802.11g Wireless Access... Bedienungsanleitung

NETGEAR

NETGEAR ProSafe WNDAP330 Bedienungsanleitung

NETGEAR

NETGEAR WAX214 Bedienungsanleitung

NETGEAR

NETGEAR WAX214v2 Bedienungsanleitung

NETGEAR

NETGEAR WNTR2001 Bedienungsanleitung

NETGEAR

NETGEAR SSL312 - ProSafe SSL VPN Concentrator 25 Bedienungsanleitung

NETGEAR

NETGEAR WN604-100NAS Bedienungsanleitung

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStation NSM2 Bedienungsanleitung

Cisco

Cisco Aironet 1550 Series Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

EnGenius

EnGenius EnStationACv2 Bedienungsanleitung

D-Link

D-Link DAP-3662 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

TP-Link

TP-Link AP9650 V1 Bedienungsanleitung