Netkrom AIR-BR500G Bedienungsanleitung

NETKROM OUTDOOR AP/BRIDGE

MODELS

AIR-BR500G/GH

AIR-BR500AG

User’s Manual

May-06 v1.36

CHAPTER 1: PRODUCT OVERVIEW .............................................1

Introduction..........................................................................................................1

Features and Benefits..........................................................................................2

When to use which mode...................................................................................3

Access Point Mode............................................................................................3

Access Point Client Mode................................................................................4

Point to Point Mode...........................................................................................5

Point to Multiple point Mode ...........................................................................6

Wireless Routing Client Mode ..........................................................................7

Gateway Mode..................................................................................................8

Wireless Adapter Mode ....................................................................................9

CHAPTER 2: HARDWARE INSTALLATION...................................10

Warnings.............................................................................................................10

Package contents .............................................................................................11

Setup Requirements...........................................................................................12

Outdoor ap installations....................................................................................13

Mounting ap in the pole or tower.................................................................17

CHAPTER 3: ACCESS TO WEB-BASED INTERFACE....................18

Access to the Web interface with uConfig......................................................18

Verify the IP address of the Access Point with NpFind...................................22

Manual access to web-based interface via Internet Explorer .....................23

CHAPTER 4: COMMON CONFIGURATION ..............................28

Management Port Setup...................................................................................28

Setting up your LAN.........................................................................................29

To view the active DHCP leases....................................................................32

To reserve specific IP addresses for predetermined DHCP clients..........33

WLAN Setup........................................................................................................36

To configure the Basic setup of the wireless mode ...................................38

To configure the Security setup of the wireless mode...............................52

To configure the Advanced setup of the wireless mode.........................52

Statistics..............................................................................................................55

WAN Setup..........................................................................................................62

(only supported by Wireless Routing Client and Gateway)..........................62

SNMP Setup ........................................................................................................70

Table of Contents

iii

STP Setup.............................................................................................................71

(Only available in Access Point, Point to Point and Point to Multiple Point

modes)................................................................................................................71

MAC Filtering......................................................................................................75

CHAPTER 5: WLAN SECURITY....................................................79

How to set up WEP .............................................................................................80

How to set up WPA-PSK/WPA2-PSK/WPA-PSK-AUTO (Only available in

Access Point mode)..........................................................................................81

How to set up 802.1x/RADIUS (Only available in Access Point mode)........83

How to set up WPA EAP/WPA2-EAP/WPA-EAP-AUTO (Only Access Point

mode supports WPA2-EAP and WPA-EAP-AUTO)...........................................85

CHAPTER 6: WIRELESS EXTENDED FEATURES ............................88

Access Control – The Wireless Pseudo VLAN (Only in Access Point mode)

.............................................................................................................................88

Wireless Pseudo VLAN Per Node...................................................................89

Wireless Pseudo VLAN Per Group..................................................................92

Wireless Setup - The Wireless Distributed System (WDS) (Only in Access

Point mode) ......................................................................................................96

Long Distance Parameters...........................................................................102

CHAPTER 7: ADVANCED CONFIGURATION..........................105

Routing (only supported by Wireless Routing Client and Gateway) ..........105

To configure Static Routing of The Access Point......................................106

NAT (only supported by Wireless Routing Client and Gateway) ................107

To configure Virtual Servers based on De-Militarized Zone (DMZ) Host108

To configure Virtual Servers based on Port Forwarding ..........................110

To configure Virtual Servers based on IP Forwarding ..............................112

Bandwidth Control (only supported by Wireless Routing Client and

Gateway) .........................................................................................................114

To enable or disable Bandwidth Control...................................................114

To configure WAN Bandwidth Control Setting .........................................115

To configure LAN Bandwidth Control Setting ...........................................116

Remote Management (only supported by Wireless Routing Client and

Gateway) .........................................................................................................118

To set up Remote Management.................................................................118

Parallel Broadband (only supported by Gateway)......................................119

To enable Parallel Broadband on the Access Point................................120

Table of Contents

Email Notification.............................................................................................121

Static Address Translation (only supported by Wireless Routing Client and

Gateway) .........................................................................................................123

DNS Redirection (only supported by Wireless Routing Client and Gateway)

...........................................................................................................................125

To enable/disable DNS Redirection............................................................127

Dynamic DNS Setup.........................................................................................127

To enable/disable Dynamic DNS Setup.....................................................128

To manage Dynamic DNS List (DDNS)........................................................128

CHAPTER 8: SECURITY CONFIGURATION...............................134

Packet Filtering ................................................................................................134

To configure Packet Filtering........................................................................134

URL Filtering.......................................................................................................138

To configure URL Filtering..............................................................................138

Firewall Configuration .....................................................................................139

To configure SPI Firewall................................................................................139

Firewall Logs.....................................................................................................143

To view Firewall Logs......................................................................................143

CHAPTER 9: SYSTEM UTILITIES .................................................144

Using the SYSTEM TOOLS Menu.......................................................................144

Ping Utility.........................................................................................................144

System Identity................................................................................................145

Set System’s Clock.........................................................................................146

Firmware Upgrade.........................................................................................147

Backup or Reset Settings ..............................................................................149

Reboot System................................................................................................152

Change Password..........................................................................................153

Logout..............................................................................................................154

Using the HELP menu .......................................................................................155

About System..................................................................................................155

APPENDIX I: FIRMWARE RECOVERY.......................................156

APPENDIX II: TCP/IP CONFIGURATION..................................158

For Windows 95/98/98SE/ME/NT ..................................................................158

Table of Contents

For Windows XP/2000.....................................................................................161

APPENDIX III: PANEL VIEWS & DESCRIPTIONS.......................163

APPENDIX IV: TECHNICAL SPECIFICATIONS .........................165

The AIRNET 54Mb Outdoor AP/Bridge series is a high-performance Access Point

and Bridge designed for enterprises and outdoor users. It is compatible with IEEE

802.11a/b/g and supports high-speed data transmission up to 54Mb. Housed in

a waterproof casing, AIRNET 54Mb Outdoor AP/Bridge series is designed to

withstand any extreme climatic conditions, making it the ideal solution for

outdoor applications.

The AIRNET 54Mb Outdoor AP/Bridge series has the ability to operate in 7

different modes and can be used in a wide variety of wireless applications like

Point-to-Point, Point-to-Multipoint, Wireless ISP, Hot Spot and Mesh Network

applications. The integrated WDS (Wireless Distribution System) feature creates

a virtually larger wireless network infrastructure by linking up other access points.

Perfect for applications requiring high bandwidth at a fraction of the cost of

T1/E1 leased-line, with the additional advantage of zero monthly recurring cost

from the service carrier. Typical usages include bridging satellite offices,

corporate LANs, school campus, as well as wireless Internet services, at

distances up to 25 miles or 40 Km (using 1 watt amplifier). The Airnet 54Mb

Outdoor Bridge High Power also represents the perfect solution for bridging

networks that are impossible to connect using wired alternatives, including

networks separated by difficult terrains, railroads, or bodies of water.

The AIRNET 54Mb Outdoor AP/Bridge series is based in Atheros eXtended Range

(XR) chipset and provides powerful features such as High Power, higher

throughput, Long Range Parameter Settings, high security 64/128/152 WEP and

WPA2, DHCP Server, Spanning Tree Protocol, Web-based Configuration and

QOS feature which allows media files to be delivered over the network more

efficiently.

Designed for outdoor use, the AIRNET 54Mb Outdoor AP/Bridge series is able to

draw power through Cat-5 Ethernet cable from our DC injector. This ensures

that power is available wherever you need it, without the need of expensive

electrical work often associated with outdoor installations.

Product Overview

•Outdoor and Waterproof Design

•Full IEEE 802.11a/b/g compatibility allows inter-operation among multiple

vendors.

•High speed data transfer rate up to 54Mbps

•WDS - Wireless Distribution System

•Long-Range Parameter Settings

•Power over Ethernet - PoE

•Supports 64/128/152 WEP, WPA and WPA2

•SNMP, Web base Management System and Windows-based utility

•Supports Atheros extended Range (XR) technology

•Spanning Tree Protocol

•DHCP Server

•Bandwidth control

•SPI Firewall and packet/URL filtering

Product Overview

The access point is versatile in the sense that it may operate in seven different

types of modes: Access Point Mode, Client Mode, Point to Point, Point to

Multiple Point, Wireless Routing Client , Gateway and Wireless Adapter.

This section presents a brief outline of the different network applications that

can be accommodated through the different modes of the access point.

This is the default mode of your access point. The Access Point mode enables

you to bridge wireless clients to access the wired network infrastructure and to

communicate with each other.

In the example above, the wireless users will be able to access the file server

connected to the switch through the access point in Access Point mode.

Product Overview

In Access Point Client mode, the access point acts as a wireless client that can

operate wirelessly with another access point to perform bridging between two

Fast Ethernet networks. The Access Point client cannot communicate directly

with any other wireless device.

In the example above, the workgroup PCs will be able to access the PCs

connected to the access point in Access Point Client mode.

Product Overview

In Point to Point mode, the access point allows point-to-point communication

between different buildings. It enables you to bridge wireless clients that are

miles or kilometers apart while unifying the networks.

In the example above, you may configure two access points (AP) to perform

transparent bridging between two buildings

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Netkrom Drahtloser Zugangspunkt Handbücher

Netkrom

Netkrom AIR-PTP3500L Bedienungsanleitung

Netkrom

Netkrom AirNet Bedienungsanleitung

Netkrom

Netkrom AIRNET AIR-PTP5000L Bedienungsanleitung

Netkrom

Netkrom Access Point Bedienungsanleitung

Netkrom

Netkrom W24-AP11H Bedienungsanleitung

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStation NSM2 Bedienungsanleitung

Cisco

Cisco Aironet 1550 Series Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

EnGenius

EnGenius EnStationACv2 Bedienungsanleitung

D-Link

D-Link DAP-3662 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

TP-Link

TP-Link AP9650 V1 Bedienungsanleitung