Netshield WIPLC8D4A-RS User Guide 9
3. Adding a device to the list
The Device Installer displays a list of the devices on the net-
work. When the Device Installer initially starts, the device list is
empty. Devices may be added by performing a search for the
devices on the network or by adding them manually.
Note: Optionally, if more than one network adapter exists on
the PC, select an alternative adapter. All network com-
munication uses the selected adapter.
Search for all devices on the network
The Search tool nds all devices within the local area network
and adds them to the device list.
Manually add a device to the device list
As an alternative to using the Search tool to add devices to
the device list, add individual devices manually to the list. This
includes devices for use on the local subnet.
From the Device menu, select Add Device. The Add Device
window displays.
Enter the IP address for the device. Click OK for the Device
Installer to search for the device.
Upon connection with the device, Device Installer adds it to
the device list. A pop-up message appears if the device is
not found.
1.
1.
2.
