Netum NT-1202 Bedienungsanleitung
NT-1202
Quick Setup Guide
This is 1D&2D plug and play model if you use a US keyboard. If you use other type of keyboard, plug
the USB cable on your device , setup keyboard language before you use it. (refer to below Keyboard
Language Type) after that the scanner can start to work.
If you want to do other configurations please refer to below programming barcodes.
Barcode Programming
Netum barcode scanners are factory programmed for common terminal and communications
settings. If you need to change these settings, programming is accomplished by scanning the bar
codes in this guide. An asterisk (*) next to an option indicates the default setting.
Communication Mode
USB -KBW
When you connect the scanner to the Host via a USB connection, you can enable the USB-KBW
feature by scanning the barcode below. It works on a Plug and Play basis and no driver is
required.
USB KBW*
USB Serial Port
If you connect scanner to the Host via a USB connection, the USB COM Port Emulation feature
allows the Host to receive data in the way as a serial port does.
USB Serial Port
Driver is required if you want to work under USB Serial Port.
Please download it from below link http://www.gzxlscan.com/downloads/
For Win 7,install 64X, for other system please install X86. As for system above Win 10 no need to
install any software.
Keyboard Language
In order to let scanner upload the codes in a correct way, you have to set the keyboard language.
For example
If you use French Keyboard, scan below barcode of “French keyboard” then scanner will upload
barcodes according to France keyboard layout. American Keyboard is set by default, if you use a
US keyboard you can skip this step.
America Keyboard* Portugal Keyboard
Franc Keyboard Spain Keyboard
Germany Keyboard Turkey Q Keyboard
Italy Keyboard
Newly Added
Hungary Keyboard Czech Keyboard
Scanning Mode
·Key Holding
Press the button to trigger the reading, release the button to end the reading. Reading success or
reading time over a single reading time will end the reading
Level *
·Continuous Mode
Under continuous mode scanner performs continuous work. Reading success or reading time
over a single reading time will end the reading. More than the specified time will automatically
trigger the next reading.
Continuous Mode
·Auto Sense Mode
Under auto sense mode, scanner detects the brightness of the surroundings. Trigger reading
when the brightness changes. Reading success or reading time over a single reading time will end
the reading. Regardless of the last success or failure to read, re-enter the detection of the
surrounding environment brightness.
Auto Sense Mode
Terminator configuration
The scanner provides a shortcut for setting the terminating character suffix to CR or CRLF and
enabling it by scanning the appropriate barcode below.
Disable CR & LF*
CR TAB
Beeper Volume
To select a decode beep volume, scan the appropriate bar code.
Low
Medium
*High
Mute
To enable or disable close all prompt, scan the appropriate bar code below.
Disable *Enable
Default Configuration
If you want to cancel all the configuration that you have done to the scanner.
Scan below barcodes to the restore factory.
Transmit Code ID Character
A code ID character identifies the code type of a scanned bar code. This can be useful when
decoding more than one code type. The code ID character is inserted between the prefix
character (if selected) and the decoded symbol.
Symbol Code ID
Aim Code ID None*
Symbol Code ID refer to Symbol Code Identifiers.
Aim Code ID refer to AIM Code Identifiers.
Common Function
Enable/Disable UPC-A
To enable or disable UPC-A, scan the appropriate bar code below.
*Enable UPC-A Disable UPC-A
Enable/Disable UPC-E
To enable or disable UPC-E, scan the appropriate bar code below.
*Enable UPC-E Disable UPC-E
Enable/Disable EAN-8
To enable or disable EAN-8, scan the appropriate bar code below.
*Enable EAN-8 Disable EAN-8
Enable/Disable EAN-13
To enable or disable EAN-13, scan the appropriate bar code below.
*Enable EAN-13 Disable EAN-13
Enable/Disable Bookland EAN(ISBN)
To enable or disable EAN Bookland, scan the appropriate bar code below.
Enable Bookland EAN *Disable Bookland EAN
Decode UPC/EAN Supplementals
Supplementals are bar codes appended according to specific format conventions (e.g.UPC A+2,
UPC E+2, EAN 13+2, EAN 13+5). The following options are available:
*Ignore UPC/EAN with Supplementals
Do not read supplementals –Scanner can only read the barcode no matter the barcode with
supplementals or not.
Only read the barcode with supplementals- The scan engine can only read the barcode with
supplementals.
Auto read supplementals- The scan engine can not only read the barcode with supplementals, but also
read the barcode without supplementals.
Transmit UPC-A Check Digit
Scan the appropriate bar code below to transmit the symbol with or without the UPC-A check digit.
*Transmit UPC-A Check Digit Do Not Transmit UPC-A Check Digit
Transmit UPC-E Check Digit
Scan the appropriate bar code below to transmit the symbol with or without the UPC-E check digit.
*Transmit UPC-E Check Digit Do Not Transmit UPC-E Check Digit
Convert UPC-E to UPC-A
Enable this parameter to convert UPC-E (zero suppressed) decoded data to UPC-A format before transmission.
After conversion, data follows UPC-A format and is affected by UPC-A programming selections
Convert UPC-E to UPC-A
Scan DO NOT CONVERT UPC-E TO UPC-A to transmit UPC-E (zero suppressed) decoded data.
*Do Not Convert UPC-E to UPC-A
Code 128
Enable/Disable Code 128
To enable or disable Code 128, scan the appropriate bar code below.
*Enable Code 128 Disable Code 128
Code 39
Enable/Disable Code 39
To enable or disable Code 39, scan the appropriate bar code below.
*Enable Code 39 Disable Code 39
.
Transmit Code 39 Check Digit
Scan this symbol to transmit the check digit with the data.
Transmit Code 39 Check Digit (Enable)
Scan this symbol to transmit data without the check digit.
*Do Not Transmit Code 39 Check Digit (Disable)
Enable/Disable Code 39 Full ASCII
Code 39 Full ASCII is a variant of Code 39 which pairs characters to encode the full ASCII character set. To
enable or disable Code 39 Full ASCII, scan the appropriate bar code below.
See Table 4-3 for the mapping of Code 39 characters to ASCII values.
Enable Code 39 Full ASCIl *Disable Code 39 Full ASCII
NOTE Trioptic Code 39 and Code 39 Full ASCII cannot be enabled simultaneously. If you get an error beep when
enabling Code 39 Full ASCII, disable Trioptic Code 39 and try again.
Code 93
Enable/Disable Code 93
To enable or disable Code 93, scan the appropriate bar code below.
Enable Code 93 *Disable Code 93
Code 11
Enable/Disable Code 11
To enable or disable Code 11, scan the appropriate bar code below.
Enable Code 11 *Disable Code 11
Transmit Code 11 Check Digits
This feature selects whether or not to transmit the Code 11 check digit(s).
Transmit Code 11 Check Digit(s) (Enable) *Do Not Transmit Code 11 Check Digit(s) (Disable)
Inhaltsverzeichnis
Andere Netum Barcode-Lesegerät Handbücher
Netum
Netum DataMatrix pdf417 Bedienungsanleitung
Netum
Netum RS-8000 Bedienungsanleitung
Netum
Netum NT-1228BL Bedienungsanleitung
Netum
Netum NT-W5 Bedienungsanleitung
Netum
Netum NT-W6 Bedienungsanleitung
Netum
Netum NT-1228BC Bedienungsanleitung
Netum
Netum C Series Bedienungsanleitung
Netum
Netum NT-W3 Bedienungsanleitung
Netum
Netum NT-1202G Bedienungsanleitung
Netum
Netum E800 Bedienungsanleitung
Netum
Netum NT-1203 Bedienungsanleitung
Netum
Netum NT-1228BL Bedienungsanleitung
Netum
Netum NT-M3 Bedienungsanleitung
Netum
Netum NT-1698W Bedienungsanleitung
Netum
Netum NT-9600 Bedienungsanleitung
Netum
Netum NT-1228BL Bedienungsanleitung
Netum
Netum M1 Bedienungsanleitung
Netum
Netum NT-1228BL Bedienungsanleitung
Netum
Netum C Series Bedienungsanleitung
Netum
Netum NT-1200 Bedienungsanleitung
Beliebte Barcode-Lesegerät Handbücher anderer Marken
POSMicro
POSMicro Datalogic PowerScan D7100 Bedienungsanleitung
Marson
Marson MT780 Kurzanleitung zur Einrichtung
NCR
NCR RealPOS Bedienungsanleitung
Motorola
Motorola SE3300 Kurzanleitung zur Einrichtung
Element
Element P130BT Bedienungsanleitung
Motorola
Motorola Symbol LS3008 Installations- und Betriebshandbuch
