Network SDI0106Q Bedienungsanleitung

SDI0106Q

SERIAL DIGITAL VIDEO DISTRIBUTOR - 1X6 QUAD

Product Manual

Rev. 2

SDI0106Q Rev. 2

Network Electronics ASA

Thorøya

P.O. Box 1020

Sandefjord, Norway

Phone: +47 33 48 99 99

Fax: +47 33 48 99 98

E-mail: [email protected]

www.network-electronics.com

Service Phone: +47 90 60 99 99

Revision history

Current revision of this document is the uppermost in the table below.

Revision Replaces Date Change description

2 1 23/11/04

Removed reference to discontinued product

SDI0106D.

1 0 01/04/04

Updated warranty description, and combined D and

0 - 10/10/00 Initial Revision.

SDI0106Q Rev. 2

Contents

Revision history............................................................................... 2

1 Product overview......................................................................... 4

2 Specifications .............................................................................. 5

2.1 Technical specifications ...............................................................................5

2.2 Rear view.....................................................................................................5

2.3 Power connection........................................................................................5

3 Connections ................................................................................ 7

3.1 Termination of video signals ........................................................................7

General environmental requirements for Network Electronics

equipment ..................................................................................... 8

Certificate of Conformity ................................................................ 9

Product Warranty ......................................................................... 10

SDI0106Q Rev. 2

1 Product overview

The SDI0106Q provides four separate 1 to 6 serial digital video distribution

amplifiers in a single rack space ultra low profile enclosure. Looped inputs

allow forming of different configurations. This high performance amplifier in

SMD technology allows the digital transparent distribution of D1 and D2

signals. The signal passes the amplifier without any signal processing. The

SDI0106Q is designed for all distribution purposes in studio, duplication and

broadcast applications.

SDI0106Q Rev. 2

2 Specifications

2.1 Technical specifications

Data rate: 143Mbps – 270Mbps

Min. signal level: 0.25 nom. 0.8V

Max. Signal level: 4.5V

Number of inputs: 4, looped

Number of outputs: 4x6

Impedance: 75Ohms

Signal processing: None

Connector: BNC

AC power: External power supply 100 – 260 VAC

DC power: ±5V, connector DB9 male

Dimensions: 483 x 44 x 40 mm (19”, 1RU)

2.2 Rear view

Video inputs A/B Video inputs C/D

Power connector Video outputs A/B Video outputs C/D

2.3 Power connection

Do not connect mains to the desktop power supply before connecting

the power supply to the distributor.

Connect the DB9 female connector from the desktop power supply to the

main unit. Tighten the screws to assure a proper contact. To connect mains to

the desktop power supply you need a mains cord with IEC 320 connector.

SDI0106Q is normally delivered with the desktop power model AC ±5V /

10W. Upon customer request, SDI0106Q can also be delivered with DC ±5V /

30W, which may be fed by a 36 - 72 VDC mains power source. A Frame

mounted power supply solution is also available.

Please refer to the latest Network Product Catalogue for power supply types,

or call the Network Electronics ASA for this information.

SDI0106Q Rev. 2

SDI0106Q requires ±5V DC with a minimum current of 300mA. The following

pin-out is used on the DB9 male power connector:

Pin #1 0V

Pin #2 +5V

Pin #6 -5V

SDI0106Q Rev. 2

3 Connections

3.1 Termination of video signals

It is not necessary to terminate unused distribution outputs.

The looped outputs on the input section of the SDI0106Q must always be

terminated. A 75 ohms termination plug is used direct on the SDI0106Q.

To assure correct signal shape a precision termination plug with 0,1%

tolerance must be used.

If the video signal is routed from the looped outputs to other devices, the end

of the loop chain have to have an internally terminated device or a

termination plug.

SDI0106Q Rev. 2

General environmental requirements for Network Electronics

equipment

1. The equipment will meet the guaranteed performance specification under the

following environmental conditions:

- Operating room temperature range: 0°C to 45°C

- Operating relative humidity range: < 95% (non-condensing)

2. The equipment will operate without damage under the following environmental

conditions:

- Temperature range: -10°C to 55°C

- Relative humidity range: < 95% (non-condensing)

3. Electromagnetic compatibility conditions:

- Emissions: EN 55103-1 (Directive 89/336/EEC)

- Immunity: EN 55103-2 (Directive 89/336/EEC)

- Electrical safety: EN 60 950

With reference to the declaration of conformity provided with the external power

supply.

SDI0106Q Rev. 2

Certificate of Conformity

Network Electronics ASA

N-3204 Sandefjord

Norway

Company Registration Number:

NO 976 584 201 MVA

Declares under sole responsibility that the product:

Product Name: SDI0106Q

Product Description: Serial Digital Video Distributor - 1x6

Quad

To which this declaration relates are of Norwegian origin and are in conformity with

the following standards:

EN 55103-1: 1996 Generic Emissions Standard

EN 55103-2: 1996 Generic Immunity Standard

IEC 60950, 2nd Ed, 1991 + Amd. 1, 1992 +

Amd. 2, 1993 + Amd. 3, 1995 + Amd. 4, 1996

Safety Standard

SDI0106Q Rev. 2

Product Warranty

The warranty terms and conditions for the SDI0106Q follow the General Sales

Conditions by Network Electronics ASA. These conditions are available on the

company web site of Network Electronics ASA:

www.network-electronics.com

Inhaltsverzeichnis

Andere network Verstärker Handbücher

network

network Flashlink DA-AA Bedienungsanleitung

Beliebte Verstärker Handbücher anderer Marken

ASTRO

ASTRO HVO V40 P Bedienungsanleitung

Marantz

Marantz SUPERSCOPE BLA-545 Montageanleitung

NAD

NAD CI980 Bedienungsanleitung

Technics

Technics SE-CH770 Bedienungsanleitung

Harman Kardon

Harman Kardon HK6300 Bedienungsanleitung

NAD

NAD T975 Bedienungsanleitung

McIntosh

McIntosh MA6850 Bedienungsanleitung

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N Bedienungsanleitung

Viatron

Viatron Autrix Bedienungsanleitung

GME

GME GA9800 Bedienungsanleitung

Atlas

Atlas CP700 Bedienungsanleitung

Roland

Roland KC-1000 Bedienungsanleitung

Pyle

Pyle PFMRA350BW Bedienungsanleitung

Advantage

Advantage S-250 Bedienungsanleitung

IRT Electronics

IRT Electronics DVA-3007 Bedienungsanleitung

Dimavery

Dimavery BA-100 Series Bedienungsanleitung

Sony

Sony XM-S400D Bedienungsanleitung

Schertler

Schertler ROY X Bedienungsanleitung

network SDI0106Q Bedienungsanleitung

Beliebte Verstärker Handbücher anderer Marken